Commit 47083450 authored by Neelesh Gupta's avatar Neelesh Gupta Committed by Michael Ellerman
Browse files

i2c: Driver to expose PowerNV platform i2c busses 



The patch exposes the available i2c busses on the PowerNV platform
to the kernel and implements the bus driver to support i2c and
smbus commands.
The driver uses the platform device infrastructure to probe the busses
on the platform and registers them with the i2c driver framework.

Signed-off-by: default avatarNeelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> (I2C part, excluding the bindings)
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 63f13448

Documentation/devicetree/bindings/i2c/i2c-opal.txt

0 → 100644
+37 −0
Original line number Diff line number Diff line 
Device-tree bindings for I2C OPAL driver

----------------------------------------



Most of the device node and properties layout is specific to the firmware and

used by the firmware itself for configuring the port. From the linux

perspective, the properties of use are "ibm,port-name" and "ibm,opal-id".



Required properties:



- reg: Port-id within a given master

- compatible: must be "ibm,opal-i2c"

- ibm,opal-id: Refers to a specific bus and used to identify it when calling

	       the relevant OPAL functions.

- bus-frequency: Operating frequency of the i2c bus (in HZ). Informational for

		 linux, used by the FW though.



Optional properties:

- ibm,port-name: Firmware provides this name that uniquely identifies the i2c

		 port.



The node contains a number of other properties that are used by the FW itself

and depend on the specific hardware implementation. The example below depicts

a P8 on-chip bus.



Example:



i2c-bus@0 {

	reg = <0x0>;

	bus-frequency = <0x61a80>;

	compatible = "ibm,power8-i2c-port", "ibm,opal-i2c";

	ibm,opal-id = <0x1>;

	ibm,port-name = "p8_00000000_e1p0";

	#address-cells = <0x1>;

	phandle = <0x10000006>;

	#size-cells = <0x0>;

	linux,phandle = <0x10000006>;

};

arch/powerpc/include/asm/opal.h

+29 −0
Original line number Diff line number Diff line
@@ -56,6 +56,14 @@ struct opal_sg_list { 
#define OPAL_HARDWARE_FROZEN	-13

#define OPAL_WRONG_STATE	-14

#define OPAL_ASYNC_COMPLETION	-15

#define OPAL_I2C_TIMEOUT	-17

#define OPAL_I2C_INVALID_CMD	-18

#define OPAL_I2C_LBUS_PARITY	-19

#define OPAL_I2C_BKEND_OVERRUN	-20

#define OPAL_I2C_BKEND_ACCESS	-21

#define OPAL_I2C_ARBT_LOST	-22

#define OPAL_I2C_NACK_RCVD	-23

#define OPAL_I2C_STOP_ERR	-24



/* API Tokens (in r0) */

#define OPAL_INVALID_CALL			-1
@@ -158,6 +166,7 @@ struct opal_sg_list { 
#define OPAL_READ_TPO				104

#define OPAL_IPMI_SEND				107

#define OPAL_IPMI_RECV				108

#define OPAL_I2C_REQUEST			109



#ifndef __ASSEMBLY__
@@ -712,6 +721,24 @@ typedef struct oppanel_line { 
	uint64_t 	line_len;

} oppanel_line_t;



/* OPAL I2C request */

struct opal_i2c_request {

	uint8_t	type;

#define OPAL_I2C_RAW_READ	0

#define OPAL_I2C_RAW_WRITE	1

#define OPAL_I2C_SM_READ	2

#define OPAL_I2C_SM_WRITE	3

	uint8_t flags;

#define OPAL_I2C_ADDR_10	0x01	/* Not supported yet */

	uint8_t	subaddr_sz;		/* Max 4 */

	uint8_t reserved;

	__be16 addr;			/* 7 or 10 bit address */

	__be16 reserved2;

	__be32 subaddr;		/* Sub-address if any */

	__be32 size;			/* Data size */

	__be64 buffer_ra;		/* Buffer real address */

};



/* /sys/firmware/opal */

extern struct kobject *opal_kobj;
@@ -881,6 +908,8 @@ int64_t opal_ipmi_send(uint64_t interface, struct opal_ipmi_msg *msg, 
		uint64_t msg_len);

int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg,

		uint64_t *msg_len);

int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id,

			 struct opal_i2c_request *oreq);



/* Internal functions */

extern int early_init_dt_scan_opal(unsigned long node, const char *uname,

arch/powerpc/platforms/powernv/opal-wrappers.S

+1 −0
Original line number Diff line number Diff line
@@ -254,3 +254,4 @@ OPAL_CALL(opal_tpo_write, OPAL_WRITE_TPO); 
OPAL_CALL(opal_tpo_read,			OPAL_READ_TPO);

OPAL_CALL(opal_ipmi_send,			OPAL_IPMI_SEND);

OPAL_CALL(opal_ipmi_recv,			OPAL_IPMI_RECV);

OPAL_CALL(opal_i2c_request,			OPAL_I2C_REQUEST);

arch/powerpc/platforms/powernv/opal.c

+12 −0
Original line number Diff line number Diff line
@@ -653,6 +653,14 @@ static void opal_ipmi_init(struct device_node *opal_node) 
			of_platform_device_create(np, NULL, NULL);

}



static void opal_i2c_create_devs(void)

{

	struct device_node *np;



	for_each_compatible_node(np, NULL, "ibm,opal-i2c")

		of_platform_device_create(np, NULL, NULL);

}



static int __init opal_init(void)

{

	struct device_node *np, *consoles;
@@ -679,6 +687,9 @@ static int __init opal_init(void) 
		of_node_put(consoles);

	}



	/* Create i2c platform devices */

	opal_i2c_create_devs();



	/* Find all OPAL interrupts and request them */

	irqs = of_get_property(opal_node, "opal-interrupts", &irqlen);

	pr_debug("opal: Found %d interrupts reserved for OPAL\n",
@@ -824,3 +835,4 @@ EXPORT_SYMBOL_GPL(opal_rtc_read); 
EXPORT_SYMBOL_GPL(opal_rtc_write);

EXPORT_SYMBOL_GPL(opal_tpo_read);

EXPORT_SYMBOL_GPL(opal_tpo_write);

EXPORT_SYMBOL_GPL(opal_i2c_request);

drivers/i2c/busses/Kconfig

+11 −0
Original line number Diff line number Diff line
@@ -1044,4 +1044,15 @@ config SCx200_ACB 
	  This support is also available as a module.  If so, the module

	  will be called scx200_acb.



config I2C_OPAL

	tristate "IBM OPAL I2C driver"

	depends on PPC_POWERNV

	default y

	help

	  This exposes the PowerNV platform i2c busses to the linux i2c layer,

	  the driver is based on the OPAL interfaces.



	  This driver can also be built as a module. If so, the module will be

	  called as i2c-opal.



endmenu

CRA Git | Maintained and supported by SUSTech CRA and CCSE