+18
−0
drivers/clocksource/rockchip_timer.c
0 → 100644
+180
−0
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
The rk3288 board uses the architected timers and these ones are shutdown when the cpu is powered down. There is a need of a broadcast timer in this case to ensure proper wakeup when the cpus are in sleep mode and a timer expires. This driver provides the basic timer functionnality as a backup for the local timers at sleep time. The timer belongs to the alive subsystem. It includes two programmables 64 bits timer channels but the driver only uses 32bits. It works with two operations mode: free running and user defined count. Programing sequence: 1. Timer initialization: * Disable the timer by writing '0' to the CONTROLREG register * Program the timer mode by writing the mode to the CONTROLREG register * Set the interrupt mask 2. Setting the count value: * Load the count value to the registers COUNT0 and COUNT1 (not used). 3. Enable the timer * Write '1' to the CONTROLREG register with the mode (free running or user) Signed-off-by:Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by:
Heiko Stuebner <heiko@sntech.de>
CRA Git | Maintained and supported by SUSTech CRA and CCSE