Commit 46738b13 authored by David Lebrun's avatar David Lebrun Committed by David S. Miller
Browse files

ipv6: sr: add option to control lwtunnel support 



This patch adds a new option CONFIG_IPV6_SEG6_LWTUNNEL to enable/disable
support of encapsulation with the lightweight tunnels. When this option
is enabled, CONFIG_LWTUNNEL is automatically selected.

Fix commit 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")

Without a proper option to control lwtunnel support for SR-IPv6, if
CONFIG_LWTUNNEL=n then the IPv6 initialization fails as a consequence
of seg6_iptunnel_init() failure with EOPNOTSUPP:

NET: Registered protocol family 10
IPv6: Attempt to unregister permanent protocol 6
IPv6: Attempt to unregister permanent protocol 136
IPv6: Attempt to unregister permanent protocol 17
NET: Unregistered protocol family 10

Tested (compiling, booting, and loading ipv6 module when relevant)
with possible combinations of CONFIG_IPV6={y,m,n},
CONFIG_IPV6_SEG6_LWTUNNEL={y,n} and CONFIG_LWTUNNEL={y,n}.

Reported-by: default avatarLorenzo Colitti <lorenzo@google.com>
Suggested-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: default avatarDavid Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 21b23dae

net/ipv6/Kconfig

+12 −1
Original line number Diff line number Diff line
@@ -289,9 +289,20 @@ config IPV6_PIMSM_V2 
	  Support for IPv6 PIM multicast routing protocol PIM-SMv2.

	  If unsure, say N.



config IPV6_SEG6_LWTUNNEL

	bool "IPv6: Segment Routing Header encapsulation support"

	depends on IPV6

	select LWTUNNEL

	---help---

	  Support for encapsulation of packets within an outer IPv6

	  header and a Segment Routing Header using the lightweight

	  tunnels mechanism.



	  If unsure, say N.



config IPV6_SEG6_INLINE

	bool "IPv6: direct Segment Routing Header insertion "

	depends on IPV6

	depends on IPV6_SEG6_LWTUNNEL

	---help---

	  Support for direct insertion of the Segment Routing Header,

	  also known as inline mode. Be aware that direct insertion of

net/ipv6/Makefile

+3 −2
Original line number Diff line number Diff line
@@ -9,7 +9,7 @@ ipv6-objs := af_inet6.o anycast.o ip6_output.o ip6_input.o addrconf.o \ 
		route.o ip6_fib.o ipv6_sockglue.o ndisc.o udp.o udplite.o \

		raw.o icmp.o mcast.o reassembly.o tcp_ipv6.o ping.o \

		exthdrs.o datagram.o ip6_flowlabel.o inet6_connection_sock.o \

		udp_offload.o seg6.o seg6_iptunnel.o

		udp_offload.o seg6.o



ipv6-offload :=	ip6_offload.o tcpv6_offload.o exthdrs_offload.o
@@ -23,6 +23,8 @@ ipv6-$(CONFIG_IPV6_MULTIPLE_TABLES) += fib6_rules.o 
ipv6-$(CONFIG_PROC_FS) += proc.o

ipv6-$(CONFIG_SYN_COOKIES) += syncookies.o

ipv6-$(CONFIG_NETLABEL) += calipso.o

ipv6-$(CONFIG_IPV6_SEG6_LWTUNNEL) += seg6_iptunnel.o

ipv6-$(CONFIG_IPV6_SEG6_HMAC) += seg6_hmac.o



ipv6-objs += $(ipv6-y)
@@ -44,7 +46,6 @@ obj-$(CONFIG_IPV6_SIT) += sit.o 
obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.o

obj-$(CONFIG_IPV6_GRE) += ip6_gre.o

obj-$(CONFIG_IPV6_FOU) += fou6.o

obj-$(CONFIG_IPV6_SEG6_HMAC) += seg6_hmac.o



obj-y += addrconf_core.o exthdrs_core.o ip6_checksum.o ip6_icmp.o

obj-$(CONFIG_INET) += output_core.o protocol.o $(ipv6-offload)

net/ipv6/seg6.c

+8 −0
Original line number Diff line number Diff line
@@ -451,9 +451,11 @@ int __init seg6_init(void) 
	if (err)

		goto out_unregister_genl;



#ifdef CONFIG_IPV6_SEG6_LWTUNNEL

	err = seg6_iptunnel_init();

	if (err)

		goto out_unregister_pernet;

#endif



#ifdef CONFIG_IPV6_SEG6_HMAC

	err = seg6_hmac_init();
@@ -467,10 +469,14 @@ out: 
	return err;

#ifdef CONFIG_IPV6_SEG6_HMAC

out_unregister_iptun:

#ifdef CONFIG_IPV6_SEG6_LWTUNNEL

	seg6_iptunnel_exit();

#endif

#endif

#ifdef CONFIG_IPV6_SEG6_LWTUNNEL

out_unregister_pernet:

	unregister_pernet_subsys(&ip6_segments_ops);

#endif

out_unregister_genl:

	genl_unregister_family(&seg6_genl_family);

	goto out;
@@ -481,7 +487,9 @@ void seg6_exit(void) 
#ifdef CONFIG_IPV6_SEG6_HMAC

	seg6_hmac_exit();

#endif

#ifdef CONFIG_IPV6_SEG6_LWTUNNEL

	seg6_iptunnel_exit();

#endif

	unregister_pernet_subsys(&ip6_segments_ops);

	genl_unregister_family(&seg6_genl_family);

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE