Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next

Application Data Integrity (ADI)

================================

SPARC M7 processor adds the Application Data Integrity (ADI) feature.

ADI allows a task to set version tags on any subset of its address

space. Once ADI is enabled and version tags are set for ranges of

address space of a task, the processor will compare the tag in pointers

to memory in these ranges to the version set by the application

previously. Access to memory is granted only if the tag in given pointer

matches the tag set by the application. In case of mismatch, processor

raises an exception.

Following steps must be taken by a task to enable ADI fully:

1. Set the user mode PSTATE.mcde bit. This acts as master switch for

   the task's entire address space to enable/disable ADI for the task.

2. Set TTE.mcd bit on any TLB entries that correspond to the range of

   addresses ADI is being enabled on. MMU checks the version tag only

   on the pages that have TTE.mcd bit set.

3. Set the version tag for virtual addresses using stxa instruction

   and one of the MCD specific ASIs. Each stxa instruction sets the

   given tag for one ADI block size number of bytes. This step must

   be repeated for entire page to set tags for entire page.

ADI block size for the platform is provided by the hypervisor to kernel

in machine description tables. Hypervisor also provides the number of

top bits in the virtual address that specify the version tag.  Once

version tag has been set for a memory location, the tag is stored in the

physical memory and the same tag must be present in the ADI version tag

bits of the virtual address being presented to the MMU. For example on

SPARC M7 processor, MMU uses bits 63-60 for version tags and ADI block

size is same as cacheline size which is 64 bytes. A task that sets ADI

version to, say 10, on a range of memory, must access that memory using

virtual addresses that contain 0xa in bits 63-60.

ADI is enabled on a set of pages using mprotect() with PROT_ADI flag.

When ADI is enabled on a set of pages by a task for the first time,

kernel sets the PSTATE.mcde bit fot the task. Version tags for memory

addresses are set with an stxa instruction on the addresses using

ASI_MCD_PRIMARY or ASI_MCD_ST_BLKINIT_PRIMARY. ADI block size is

provided by the hypervisor to the kernel.  Kernel returns the value of

ADI block size to userspace using auxiliary vector along with other ADI

info. Following auxiliary vectors are provided by the kernel:

	AT_ADI_BLKSZ	ADI block size. This is the granularity and

			alignment, in bytes, of ADI versioning.

	AT_ADI_NBITS	Number of ADI version bits in the VA

IMPORTANT NOTES:

- Version tag values of 0x0 and 0xf are reserved. These values match any

  tag in virtual address and never generate a mismatch exception.

- Version tags are set on virtual addresses from userspace even though

  tags are stored in physical memory. Tags are set on a physical page

  after it has been allocated to a task and a pte has been created for

  it.

- When a task frees a memory page it had set version tags on, the page

  goes back to free page pool. When this page is re-allocated to a task,

  kernel clears the page using block initialization ASI which clears the

  version tags as well for the page. If a page allocated to a task is

  freed and allocated back to the same task, old version tags set by the

  task on that page will no longer be present.

- ADI tag mismatches are not detected for non-faulting loads.

- Kernel does not set any tags for user pages and it is entirely a

  task's responsibility to set any version tags. Kernel does ensure the

  version tags are preserved if a page is swapped out to the disk and

  swapped back in. It also preserves that version tags if a page is

  migrated.

- ADI works for any size pages. A userspace task need not be aware of

  page size when using ADI. It can simply select a virtual address

  range, enable ADI on the range using mprotect() and set version tags

  for the entire range. mprotect() ensures range is aligned to page size

  and is a multiple of page size.

- ADI tags can only be set on writable memory. For example, ADI tags can

  not be set on read-only mappings.

ADI related traps

-----------------

With ADI enabled, following new traps may occur:

Disrupting memory corruption

	When a store accesses a memory localtion that has TTE.mcd=1,

	the task is running with ADI enabled (PSTATE.mcde=1), and the ADI

	tag in the address used (bits 63:60) does not match the tag set on

	the corresponding cacheline, a memory corruption trap occurs. By

	default, it is a disrupting trap and is sent to the hypervisor

	first. Hypervisor creates a sun4v error report and sends a

	resumable error (TT=0x7e) trap to the kernel. The kernel sends

	a SIGSEGV to the task that resulted in this trap with the following

	info:

		siginfo.si_signo = SIGSEGV;

		siginfo.errno = 0;

		siginfo.si_code = SEGV_ADIDERR;

		siginfo.si_addr = addr; /* PC where first mismatch occurred */

		siginfo.si_trapno = 0;

Precise memory corruption

	When a store accesses a memory location that has TTE.mcd=1,

	the task is running with ADI enabled (PSTATE.mcde=1), and the ADI

	tag in the address used (bits 63:60) does not match the tag set on

	the corresponding cacheline, a memory corruption trap occurs. If

	MCD precise exception is enabled (MCDPERR=1), a precise

	exception is sent to the kernel with TT=0x1a. The kernel sends

	a SIGSEGV to the task that resulted in this trap with the following

	info:

		siginfo.si_signo = SIGSEGV;

		siginfo.errno = 0;

		siginfo.si_code = SEGV_ADIPERR;

		siginfo.si_addr = addr;	/* address that caused trap */

		siginfo.si_trapno = 0;

	NOTE: ADI tag mismatch on a load always results in precise trap.

MCD disabled

	When a task has not enabled ADI and attempts to set ADI version

	on a memory address, processor sends an MCD disabled trap. This

	trap is handled by hypervisor first and the hypervisor vectors this

	trap through to the kernel as Data Access Exception trap with

	fault type set to 0xa (invalid ASI). When this occurs, the kernel

	sends the task SIGSEGV signal with following info:

		siginfo.si_signo = SIGSEGV;

		siginfo.errno = 0;

		siginfo.si_code = SEGV_ACCADI;

		siginfo.si_addr = addr;	/* address that caused trap */

		siginfo.si_trapno = 0;

Sample program to use ADI

-------------------------

Following sample program is meant to illustrate how to use the ADI

functionality.

#include <unistd.h>

#include <stdio.h>

#include <stdlib.h>

#include <elf.h>

#include <sys/ipc.h>

#include <sys/shm.h>

#include <sys/mman.h>

#include <asm/asi.h>

#ifndef AT_ADI_BLKSZ

#define AT_ADI_BLKSZ	48

#endif

#ifndef AT_ADI_NBITS

#define AT_ADI_NBITS	49

#endif

#ifndef PROT_ADI

#define PROT_ADI	0x10

#endif

#define BUFFER_SIZE     32*1024*1024UL

main(int argc, char* argv[], char* envp[])

{

        unsigned long i, mcde, adi_blksz, adi_nbits;

        char *shmaddr, *tmp_addr, *end, *veraddr, *clraddr;

        int shmid, version;

	Elf64_auxv_t *auxv;

	adi_blksz = 0;

	while(*envp++ != NULL);

	for (auxv = (Elf64_auxv_t *)envp; auxv->a_type != AT_NULL; auxv++) {

		switch (auxv->a_type) {

		case AT_ADI_BLKSZ:

			adi_blksz = auxv->a_un.a_val;

			break;

		case AT_ADI_NBITS:

			adi_nbits = auxv->a_un.a_val;

			break;

		}

	}

	if (adi_blksz == 0) {

		fprintf(stderr, "Oops! ADI is not supported\n");

		exit(1);

	}

	printf("ADI capabilities:\n");

	printf("\tBlock size = %ld\n", adi_blksz);

	printf("\tNumber of bits = %ld\n", adi_nbits);

        if ((shmid = shmget(2, BUFFER_SIZE,

                                IPC_CREAT | SHM_R | SHM_W)) < 0) {

                perror("shmget failed");

                exit(1);

        }

        shmaddr = shmat(shmid, NULL, 0);

        if (shmaddr == (char *)-1) {

                perror("shm attach failed");

                shmctl(shmid, IPC_RMID, NULL);

                exit(1);

        }

	if (mprotect(shmaddr, BUFFER_SIZE, PROT_READ|PROT_WRITE|PROT_ADI)) {

		perror("mprotect failed");

		goto err_out;

	}

        /* Set the ADI version tag on the shm segment

         */

        version = 10;

        tmp_addr = shmaddr;

        end = shmaddr + BUFFER_SIZE;

        while (tmp_addr < end) {

                asm volatile(

                        "stxa %1, [%0]0x90\n\t"

                        :

                        : "r" (tmp_addr), "r" (version));

                tmp_addr += adi_blksz;

        }

	asm volatile("membar #Sync\n\t");

        /* Create a versioned address from the normal address by placing

	 * version tag in the upper adi_nbits bits

         */

        tmp_addr = (void *) ((unsigned long)shmaddr << adi_nbits);

        tmp_addr = (void *) ((unsigned long)tmp_addr >> adi_nbits);

        veraddr = (void *) (((unsigned long)version << (64-adi_nbits))

                        | (unsigned long)tmp_addr);

        printf("Starting the writes:\n");

        for (i = 0; i < BUFFER_SIZE; i++) {

                veraddr[i] = (char)(i);

                if (!(i % (1024 * 1024)))

                        printf(".");

        }

        printf("\n");

        printf("Verifying data...");

	fflush(stdout);

        for (i = 0; i < BUFFER_SIZE; i++)

                if (veraddr[i] != (char)i)

                        printf("\nIndex %lu mismatched\n", i);

        printf("Done.\n");

        /* Disable ADI and clean up

         */

	if (mprotect(shmaddr, BUFFER_SIZE, PROT_READ|PROT_WRITE)) {

		perror("mprotect failed");

		goto err_out;

	}

        if (shmdt((const void *)shmaddr) != 0)

                perror("Detach failure");

        shmctl(shmid, IPC_RMID, NULL);

        exit(0);

err_out:

        if (shmdt((const void *)shmaddr) != 0)

                perror("Detach failure");

        shmctl(shmid, IPC_RMID, NULL);

        exit(1);

}

}

#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags)

static inline bool arch_validate_prot(unsigned long prot)

static inline bool arch_validate_prot(unsigned long prot, unsigned long addr)

{

	if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO))

		return false;

		return false;

	return true;

}

#define arch_validate_prot(prot) arch_validate_prot(prot)

#define arch_validate_prot arch_validate_prot

#endif /* CONFIG_PPC64 */

#endif	/* _ASM_POWERPC_MMAN_H */

{

	long ret = -EINVAL;

	if (!arch_validate_prot(prot))

	if (!arch_validate_prot(prot, addr))

		goto out;

	if (shift) {

#ifndef ___ASM_SPARC_ADI_H

#define ___ASM_SPARC_ADI_H

#if defined(__sparc__) && defined(__arch64__)

#include <asm/adi_64.h>

#endif

#endif

/* adi_64.h: ADI related data structures

 *

 * Copyright (c) 2016 Oracle and/or its affiliates. All rights reserved.

 * Author: Khalid Aziz (khalid.aziz@oracle.com)

 *

 * This work is licensed under the terms of the GNU GPL, version 2.

 */

#ifndef __ASM_SPARC64_ADI_H

#define __ASM_SPARC64_ADI_H

#include <linux/types.h>

#ifndef __ASSEMBLY__

struct adi_caps {

	__u64 blksz;

	__u64 nbits;

	__u64 ue_on_adi;

};

struct adi_config {

	bool enabled;

	struct adi_caps caps;

};

extern struct adi_config adi_state;

extern void mdesc_adi_init(void);

static inline bool adi_capable(void)

{

	return adi_state.enabled;

}

static inline unsigned long adi_blksize(void)

{

	return adi_state.caps.blksz;

}

static inline unsigned long adi_nbits(void)

{

	return adi_state.caps.nbits;

}

#endif	/* __ASSEMBLY__ */

#endif	/* !(__ASM_SPARC64_ADI_H) */