phy: Add Northstar2 PCI Phy support (4484f730) · Commits · 戴 / test

drivers/phy/Kconfig

+8 −0

Original line number	Diff line number	Diff line
		@@ -434,4 +434,12 @@ config PHY_CYGNUS_PCIE

		source "drivers/phy/tegra/Kconfig"

		config PHY_NS2_PCIE
		tristate "Broadcom Northstar2 PCIe PHY driver"
		depends on OF && MDIO_BUS_MUX_BCM_IPROC
		select GENERIC_PHY
		default ARCH_BCM_IPROC
		help
		Enable this to support the Broadcom Northstar2 PCIe PHY.
		If unsure, say N.
		endmenu

drivers/phy/Makefile

+1 −1

Original line number	Diff line number	Diff line
		@@ -53,5 +53,5 @@ obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
		obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
		obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
		obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o

		obj-$(CONFIG_ARCH_TEGRA) += tegra/
		obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o

drivers/phy/phy-bcm-ns2-pcie.c

0 → 100644

+115 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (C) 2016 Broadcom
		*
		* This program is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License as
		* published by the Free Software Foundation version 2.
		*
		* This program is distributed "as is" WITHOUT ANY WARRANTY of any
		* kind, whether express or implied; without even the implied warranty
		* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		#include <linux/device.h>
		#include <linux/module.h>
		#include <linux/of_mdio.h>
		#include <linux/mdio.h>
		#include <linux/phy.h>
		#include <linux/phy/phy.h>

		struct ns2_pci_phy {
		struct mdio_device *mdiodev;
		struct phy *phy;
		};

		#define BLK_ADDR_REG_OFFSET 0x1f
		#define PLL_AFE1_100MHZ_BLK 0x2100
		#define PLL_CLK_AMP_OFFSET 0x03
		#define PLL_CLK_AMP_2P05V 0x2b18

		static int ns2_pci_phy_init(struct phy *p)
		{
		struct ns2_pci_phy *phy = phy_get_drvdata(p);
		int rc;

		/* select the AFE 100MHz block page */
		rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
		BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
		if (rc)
		goto err;

		/* set the 100 MHz reference clock amplitude to 2.05 v */
		rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
		PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
		if (rc)
		goto err;

		return 0;

		err:
		dev_err(&phy->mdiodev->dev, "Error %d writing to phy\n", rc);
		return rc;
		}

		static struct phy_ops ns2_pci_phy_ops = {
		.init = ns2_pci_phy_init,
		};

		static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
		{
		struct device *dev = &mdiodev->dev;
		struct phy_provider *provider;
		struct ns2_pci_phy *p;
		struct phy *phy;

		phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops);
		if (IS_ERR(phy)) {
		dev_err(dev, "failed to create Phy\n");
		return PTR_ERR(phy);
		}

		p = devm_kmalloc(dev, sizeof(struct ns2_pci_phy),
		GFP_KERNEL);
		if (!p)
		return -ENOMEM;

		p->mdiodev = mdiodev;
		dev_set_drvdata(dev, p);

		p->phy = phy;
		phy_set_drvdata(phy, p);

		provider = devm_of_phy_provider_register(&phy->dev,
		of_phy_simple_xlate);
		if (IS_ERR(provider)) {
		dev_err(dev, "failed to register Phy provider\n");
		return PTR_ERR(provider);
		}

		dev_info(dev, "%s PHY registered\n", dev_name(dev));

		return 0;
		}

		static const struct of_device_id ns2_pci_phy_of_match[] = {
		{ .compatible = "brcm,ns2-pcie-phy", },
		{ /* sentinel */ },
		};
		MODULE_DEVICE_TABLE(of, ns2_pci_phy_of_match);

		static struct mdio_driver ns2_pci_phy_driver = {
		.mdiodrv = {
		.driver = {
		.name = "phy-bcm-ns2-pci",
		.of_match_table = ns2_pci_phy_of_match,
		},
		},
		.probe = ns2_pci_phy_probe,
		};
		mdio_module_driver(ns2_pci_phy_driver);

		MODULE_AUTHOR("Broadcom");
		MODULE_DESCRIPTION("Broadcom Northstar2 PCI Phy driver");
		MODULE_LICENSE("GPL v2");
		MODULE_ALIAS("platform:phy-bcm-ns2-pci");

Admin message