Commit 4326ed0b authored by Alan Stern's avatar Alan Stern Committed by Greg Kroah-Hartman
Browse files

USB: address-0 handling during device initialization 



This patch (as947) changes the device initialization and enumeration
code in hub.c; now udev->devnum will be set to 0 while the device is
being accessed at address 0.  Until now this wasn't needed because the
address value was passed as part of urb->pipe; without that field the
device address must be stored elsewhere.

Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 5e60a161

drivers/usb/core/hub.c

+13 −8
Original line number Diff line number Diff line
@@ -1481,6 +1481,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, 
		case 0:

			/* TRSTRCY = 10 ms; plus some extra */

			msleep(10 + 40);

		  	udev->devnum = 0;	/* Device now at address 0 */

			/* FALL THROUGH */

		case -ENOTCONN:

		case -ENODEV:
@@ -2005,20 +2006,21 @@ static void ep0_reinit(struct usb_device *udev) 
#define usb_sndaddr0pipe()	(PIPE_CONTROL << 30)

#define usb_rcvaddr0pipe()	((PIPE_CONTROL << 30) | USB_DIR_IN)



static int hub_set_address(struct usb_device *udev)

static int hub_set_address(struct usb_device *udev, int devnum)

{

	int retval;



	if (udev->devnum == 0)

	if (devnum <= 1)

		return -EINVAL;

	if (udev->state == USB_STATE_ADDRESS)

		return 0;

	if (udev->state != USB_STATE_DEFAULT)

		return -EINVAL;

	retval = usb_control_msg(udev, usb_sndaddr0pipe(),

		USB_REQ_SET_ADDRESS, 0, udev->devnum, 0,

		USB_REQ_SET_ADDRESS, 0, devnum, 0,

		NULL, 0, USB_CTRL_SET_TIMEOUT);

	if (retval == 0) {

		udev->devnum = devnum;	/* Device now using proper address */

		usb_set_device_state(udev, USB_STATE_ADDRESS);

		ep0_reinit(udev);

	}
@@ -2045,6 +2047,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, 
	unsigned		delay = HUB_SHORT_RESET_TIME;

	enum usb_device_speed	oldspeed = udev->speed;

	char 			*speed, *type;

	int			devnum = udev->devnum;



	/* root hub ports have a slightly longer reset period

	 * (from USB 2.0 spec, section 7.1.7.5)
@@ -2115,7 +2118,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, 
	dev_info (&udev->dev,

		  "%s %s speed %sUSB device using %s and address %d\n",

		  (udev->config) ? "reset" : "new", speed, type,

		  udev->bus->controller->driver->name, udev->devnum);

		  udev->bus->controller->driver->name, devnum);



	/* Set up TT records, if needed  */

	if (hdev->tt) {
@@ -2202,7 +2205,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, 
		}



		for (j = 0; j < SET_ADDRESS_TRIES; ++j) {

			retval = hub_set_address(udev);

			retval = hub_set_address(udev, devnum);

			if (retval >= 0)

				break;

			msleep(200);
@@ -2210,7 +2213,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, 
		if (retval < 0) {

			dev_err(&udev->dev,

				"device not accepting address %d, error %d\n",

				udev->devnum, retval);

				devnum, retval);

			goto fail;

		}
@@ -2263,8 +2266,10 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, 
	retval = 0;



fail:

	if (retval)

	if (retval) {

		hub_port_disable(hub, port1, 0);

		udev->devnum = devnum;	/* for disconnect processing */

	}

	mutex_unlock(&usb_address0_mutex);

	return retval;

}

drivers/usb/core/urb.c

+1 −3
Original line number Diff line number Diff line
@@ -284,9 +284,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) 


	if (!urb || urb->hcpriv || !urb->complete)

		return -EINVAL;

	if (!(dev = urb->dev) ||

	    (dev->state < USB_STATE_DEFAULT) ||

	    (!dev->bus) || (dev->devnum <= 0))

	if (!(dev = urb->dev) || dev->state < USB_STATE_DEFAULT)

		return -ENODEV;

	if (dev->bus->controller->power.power_state.event != PM_EVENT_ON

			|| dev->state == USB_STATE_SUSPENDED)

CRA Git | Maintained and supported by SUSTech CRA and CCSE