Commit 4150c572 authored by Johannes Berg's avatar Johannes Berg Committed by David S. Miller
Browse files

[PATCH] mac80211: revamp interface and filter configuration 



Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.

This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.

Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.

At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().

The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.

Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).

Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarMichael Wu <flamingice@sourmilk.net>
Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: default avatarIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 070ac3a2

drivers/net/wireless/adm8211.c

+78 −66
Original line number Diff line number Diff line
@@ -281,49 +281,6 @@ static int adm8211_get_stats(struct ieee80211_hw *dev, 
	return 0;

}



static void adm8211_set_rx_mode(struct ieee80211_hw *dev,

				unsigned short flags, int mc_count)

{

	struct adm8211_priv *priv = dev->priv;

	unsigned int bit_nr;

	u32 mc_filter[2];

	struct dev_mc_list *mclist;

	void *tmp;



	if (flags & IFF_PROMISC) {

		priv->nar |= ADM8211_NAR_PR;

		priv->nar &= ~ADM8211_NAR_MM;

		mc_filter[1] = mc_filter[0] = ~0;

	} else if ((flags & IFF_ALLMULTI) || (mc_count > -1)) {

		priv->nar &= ~ADM8211_NAR_PR;

		priv->nar |= ADM8211_NAR_MM;

		mc_filter[1] = mc_filter[0] = ~0;

	} else {

		priv->nar &= ~(ADM8211_NAR_MM | ADM8211_NAR_PR);

		mc_filter[1] = mc_filter[0] = 0;

		mclist = NULL;

		while ((mclist = ieee80211_get_mc_list_item(dev, mclist, &tmp))) {

			bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;



			bit_nr &= 0x3F;

			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);

		}

	}



	ADM8211_IDLE_RX();



	ADM8211_CSR_WRITE(MAR0, mc_filter[0]);

	ADM8211_CSR_WRITE(MAR1, mc_filter[1]);

	ADM8211_CSR_READ(NAR);



	if (flags & IFF_PROMISC)

		dev->flags |= IEEE80211_HW_RX_INCLUDES_FCS;

	else

		dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;



	ADM8211_RESTORE();

}



static int adm8211_get_tx_stats(struct ieee80211_hw *dev,

				struct ieee80211_tx_queue_stats *stats)

{
@@ -1254,13 +1211,6 @@ static void adm8211_hw_init(struct ieee80211_hw *dev) 


	/* Clear the missed-packet counter. */

	ADM8211_CSR_READ(LPC);



	if (!priv->mac_addr)

		return;



	/* set mac address */

	ADM8211_CSR_WRITE(PAR0, *(u32 *)priv->mac_addr);

	ADM8211_CSR_WRITE(PAR1, *(u16 *)&priv->mac_addr[4]);

}



static int adm8211_hw_reset(struct ieee80211_hw *dev)
@@ -1334,7 +1284,7 @@ static void adm8211_set_interval(struct ieee80211_hw *dev, 
	ADM8211_CSR_WRITE(BPLI, reg);

}



static void adm8211_set_bssid(struct ieee80211_hw *dev, u8 *bssid)

static void adm8211_set_bssid(struct ieee80211_hw *dev, const u8 *bssid)

{

	struct adm8211_priv *priv = dev->priv;

	u32 reg;
@@ -1395,24 +1345,87 @@ static int adm8211_config_interface(struct ieee80211_hw *dev, int if_id, 
	return 0;

}



static void adm8211_configure_filter(struct ieee80211_hw *dev,

				     unsigned int changed_flags,

				     unsigned int *total_flags,

				     int mc_count, struct dev_mc_list *mclist)

{

	static const u8 bcast[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };

	struct adm8211_priv *priv = dev->priv;

	unsigned int bit_nr, new_flags;

	u32 mc_filter[2];

	int i;



	new_flags = 0;



	if (*total_flags & FIF_PROMISC_IN_BSS) {

		new_flags |= FIF_PROMISC_IN_BSS;

		priv->nar |= ADM8211_NAR_PR;

		priv->nar &= ~ADM8211_NAR_MM;

		mc_filter[1] = mc_filter[0] = ~0;

	} else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32)) {

		new_flags |= FIF_ALLMULTI;

		priv->nar &= ~ADM8211_NAR_PR;

		priv->nar |= ADM8211_NAR_MM;

		mc_filter[1] = mc_filter[0] = ~0;

	} else {

		priv->nar &= ~(ADM8211_NAR_MM | ADM8211_NAR_PR);

		mc_filter[1] = mc_filter[0] = 0;

		for (i = 0; i < mc_count; i++) {

			if (!mclist)

				break;

			bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;



			bit_nr &= 0x3F;

			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);

			mclist = mclist->next;

		}

	}



	ADM8211_IDLE_RX();



	ADM8211_CSR_WRITE(MAR0, mc_filter[0]);

	ADM8211_CSR_WRITE(MAR1, mc_filter[1]);

	ADM8211_CSR_READ(NAR);



	if (priv->nar & ADM8211_NAR_PR)

		dev->flags |= IEEE80211_HW_RX_INCLUDES_FCS;

	else

		dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;



	if (*total_flags & FIF_BCN_PRBRESP_PROMISC)

		adm8211_set_bssid(dev, bcast);

	else

		adm8211_set_bssid(dev, priv->bssid);



	ADM8211_RESTORE();



	*total_flags = new_flags;

}



static int adm8211_add_interface(struct ieee80211_hw *dev,

				 struct ieee80211_if_init_conf *conf)

{

	struct adm8211_priv *priv = dev->priv;

	/* NOTE: using IEEE80211_IF_TYPE_MGMT to indicate no mode selected */

	if (priv->mode != IEEE80211_IF_TYPE_MGMT)

		return -1;

	if (priv->mode != IEEE80211_IF_TYPE_MNTR)

		return -EOPNOTSUPP;



	switch (conf->type) {

	case IEEE80211_IF_TYPE_STA:

	case IEEE80211_IF_TYPE_MNTR:

		priv->mode = conf->type;

		break;

	default:

		return -EOPNOTSUPP;

	}



	priv->mac_addr = conf->mac_addr;

	ADM8211_IDLE();



	ADM8211_CSR_WRITE(PAR0, *(u32 *)conf->mac_addr);

	ADM8211_CSR_WRITE(PAR1, *(u16 *)(conf->mac_addr + 4));



	adm8211_update_mode(dev);



	ADM8211_RESTORE();



	return 0;

}
@@ -1421,7 +1434,7 @@ static void adm8211_remove_interface(struct ieee80211_hw *dev, 
				     struct ieee80211_if_init_conf *conf)

{

	struct adm8211_priv *priv = dev->priv;

	priv->mode = IEEE80211_IF_TYPE_MGMT;

	priv->mode = IEEE80211_IF_TYPE_MNTR;

}



static int adm8211_init_rings(struct ieee80211_hw *dev)
@@ -1505,7 +1518,7 @@ static void adm8211_free_rings(struct ieee80211_hw *dev) 
	}

}



static int adm8211_open(struct ieee80211_hw *dev)

static int adm8211_start(struct ieee80211_hw *dev)

{

	struct adm8211_priv *priv = dev->priv;

	int retval;
@@ -1550,7 +1563,7 @@ fail: 
	return retval;

}



static int adm8211_stop(struct ieee80211_hw *dev)

static void adm8211_stop(struct ieee80211_hw *dev)

{

	struct adm8211_priv *priv = dev->priv;
@@ -1562,7 +1575,6 @@ static int adm8211_stop(struct ieee80211_hw *dev) 
	free_irq(priv->pdev->irq, dev);



	adm8211_free_rings(dev);

	return 0;

}



static void adm8211_calc_durations(int *dur, int *plcp, size_t payload_len, int len,
@@ -1765,13 +1777,13 @@ static int adm8211_alloc_rings(struct ieee80211_hw *dev) 


static const struct ieee80211_ops adm8211_ops = {

	.tx			= adm8211_tx,

	.open			= adm8211_open,

	.start			= adm8211_start,

	.stop			= adm8211_stop,

	.add_interface		= adm8211_add_interface,

	.remove_interface	= adm8211_remove_interface,

	.config			= adm8211_config,

	.config_interface	= adm8211_config_interface,

	.set_multicast_list	= adm8211_set_rx_mode,

	.configure_filter	= adm8211_configure_filter,

	.get_stats		= adm8211_get_stats,

	.get_tx_stats		= adm8211_get_tx_stats,

	.get_tsf		= adm8211_get_tsft
@@ -1905,7 +1917,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev, 
	priv->tx_power = 0x40;

	priv->lpf_cutoff = 0xFF;

	priv->lnags_threshold = 0xFF;

	priv->mode = IEEE80211_IF_TYPE_MGMT;

	priv->mode = IEEE80211_IF_TYPE_MNTR;



	/* Power-on issue. EEPROM won't read correctly without */

	if (priv->revid >= ADM8211_REV_BA) {
@@ -2000,7 +2012,7 @@ static int adm8211_suspend(struct pci_dev *pdev, pm_message_t state) 
	struct ieee80211_hw *dev = pci_get_drvdata(pdev);

	struct adm8211_priv *priv = dev->priv;



	if (priv->mode != IEEE80211_IF_TYPE_MGMT) {

	if (priv->mode != IEEE80211_IF_TYPE_MNTR) {

		ieee80211_stop_queues(dev);

		adm8211_stop(dev);

	}
@@ -2018,8 +2030,8 @@ static int adm8211_resume(struct pci_dev *pdev) 
	pci_set_power_state(pdev, PCI_D0);

	pci_restore_state(pdev);



	if (priv->mode != IEEE80211_IF_TYPE_MGMT) {

		adm8211_open(dev);

	if (priv->mode != IEEE80211_IF_TYPE_MNTR) {

		adm8211_start(dev);

		ieee80211_start_queues(dev);

	}

drivers/net/wireless/adm8211.h

+0 −1
Original line number Diff line number Diff line
@@ -612,7 +612,6 @@ struct adm8211_priv { 
	u8 bssid[ETH_ALEN];

	u8 ssid[32];

	size_t ssid_len;

	u8 *mac_addr;



	u8 soft_rx_crc;

	u8 retry_limit;

drivers/net/wireless/b43/b43.h

+4 −11
Original line number Diff line number Diff line
@@ -604,9 +604,8 @@ struct b43_wl { 
	 * at a time. General information about this interface follows.

	 */



	/* Opaque ID of the operating interface (!= monitor

	 * interface) from the ieee80211 subsystem.

	 * Do not modify.

	/* Opaque ID of the operating interface from the ieee80211

	 * subsystem. Do not modify.

	 */

	int if_id;

	/* The MAC address of the operating interface. */
@@ -615,14 +614,10 @@ struct b43_wl { 
	u8 bssid[ETH_ALEN];

	/* Interface type. (IEEE80211_IF_TYPE_XXX) */

	int if_type;

	/* Counter of active monitor interfaces. */

	int monitor;

	/* Is the card operating in AP, STA or IBSS mode? */

	bool operating;

	/* Promisc mode active?

	 * Note that (monitor != 0) implies promisc.

	 */

	bool promisc;

	/* filter flags */

	unsigned int filter_flags;

	/* Stats about the wireless interface */

	struct ieee80211_low_level_stats ieee_stats;
@@ -779,8 +774,6 @@ static inline struct b43_wldev *dev_to_b43_wldev(struct device *dev) 
/* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */

static inline int b43_is_mode(struct b43_wl *wl, int type)

{

	if (type == IEEE80211_IF_TYPE_MNTR)

		return !!(wl->monitor);

	return (wl->operating && wl->if_type == type);

}

drivers/net/wireless/b43/main.c

+132 −116
Original line number Diff line number Diff line
@@ -92,14 +92,6 @@ static char modparam_fwpostfix[16]; 
module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);

MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load.");



static int modparam_mon_keep_bad;

module_param_named(mon_keep_bad, modparam_mon_keep_bad, int, 0444);

MODULE_PARM_DESC(mon_keep_bad, "Keep bad frames in monitor mode");



static int modparam_mon_keep_badplcp;

module_param_named(mon_keep_badplcp, modparam_mon_keep_bad, int, 0444);

MODULE_PARM_DESC(mon_keep_badplcp, "Keep frames with bad PLCP in monitor mode");



static int modparam_hwpctl;

module_param_named(hwpctl, modparam_hwpctl, int, 0444);

MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)");
@@ -561,15 +553,10 @@ static void b43_write_mac_bssid_templates(struct b43_wldev *dev) 
	}

}



static void b43_upload_card_macaddress(struct b43_wldev *dev,

				       const u8 * mac_addr)

static void b43_upload_card_macaddress(struct b43_wldev *dev)

{

	if (mac_addr)

		memcpy(dev->wl->mac_addr, mac_addr, ETH_ALEN);

	else

		memset(dev->wl->mac_addr, 0, ETH_ALEN);

	b43_write_mac_bssid_templates(dev);

	b43_macfilter_set(dev, B43_MACFILTER_SELF, mac_addr);

	b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr);

}



static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
@@ -2052,33 +2039,25 @@ static void b43_adjust_opmode(struct b43_wldev *dev) 
	ctl &= ~B43_MACCTL_KEEP_BADPLCP;

	ctl &= ~B43_MACCTL_KEEP_BAD;

	ctl &= ~B43_MACCTL_PROMISC;

	ctl &= ~B43_MACCTL_BEACPROMISC;

	ctl |= B43_MACCTL_INFRA;



	if (wl->operating) {

		switch (wl->if_type) {

		case IEEE80211_IF_TYPE_AP:

	if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))

		ctl |= B43_MACCTL_AP;

			break;

		case IEEE80211_IF_TYPE_IBSS:

	else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS))

		ctl &= ~B43_MACCTL_INFRA;

			break;

		case IEEE80211_IF_TYPE_STA:

		case IEEE80211_IF_TYPE_MNTR:

		case IEEE80211_IF_TYPE_WDS:

			break;

		default:

			B43_WARN_ON(1);

		}

	}

	if (wl->monitor) {



	if (wl->filter_flags & FIF_CONTROL)

		ctl |= B43_MACCTL_KEEP_CTL;

		if (modparam_mon_keep_bad)

	if (wl->filter_flags & FIF_FCSFAIL)

		ctl |= B43_MACCTL_KEEP_BAD;

		if (modparam_mon_keep_badplcp)

	if (wl->filter_flags & FIF_PLCPFAIL)

		ctl |= B43_MACCTL_KEEP_BADPLCP;

	}

	if (wl->promisc)

	if (wl->filter_flags & FIF_PROMISC_IN_BSS)

		ctl |= B43_MACCTL_PROMISC;

	if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC)

		ctl |= B43_MACCTL_BEACPROMISC;



	/* Workaround: On old hardware the HW-MAC-address-filter

	 * doesn't work properly, so always run promisc in filter

	 * it in software. */
@@ -2254,9 +2233,6 @@ static int b43_chip_init(struct b43_wldev *dev) 
		    & ~B43_MACCTL_INFRA);

	b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)

		    | B43_MACCTL_INFRA);

	/* Let beacons come through */

	b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)

		    | B43_MACCTL_BEACPROMISC);



	if (b43_using_pio(dev)) {

		b43_write32(dev, 0x0210, 0x00000100);
@@ -2899,9 +2875,9 @@ static int b43_dev_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) 
	return err;

}



static int b43_dev_set_key(struct ieee80211_hw *hw,

			   set_key_cmd cmd, const u8 *local_addr,

			   const u8 *addr, struct ieee80211_key_conf *key)

static int b43_dev_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,

			   const u8 *local_addr, const u8 *addr,

			   struct ieee80211_key_conf *key)

{

	struct b43_wl *wl = hw_to_b43_wl(hw);

	struct b43_wldev *dev = wl->current_dev;
@@ -3003,21 +2979,40 @@ out: 
	return err;

}



static void b43_set_multicast_list(struct ieee80211_hw *hw,

				   unsigned short netflags, int mc_count)

static void b43_configure_filter(struct ieee80211_hw *hw,

				 unsigned int changed, unsigned int *fflags,

				 int mc_count, struct dev_addr_list *mc_list)

{

	struct b43_wl *wl = hw_to_b43_wl(hw);

	struct b43_wldev *dev = wl->current_dev;

	unsigned long flags;



	if (!dev)

	if (!dev) {

		*fflags = 0;

		return;

	}



	spin_lock_irqsave(&wl->irq_lock, flags);

	if (wl->promisc != !!(netflags & IFF_PROMISC)) {

		wl->promisc = !!(netflags & IFF_PROMISC);

		if (b43_status(dev) >= B43_STAT_INITIALIZED)

	*fflags &= FIF_PROMISC_IN_BSS |

		  FIF_ALLMULTI |

		  FIF_FCSFAIL |

		  FIF_PLCPFAIL |

		  FIF_CONTROL |

		  FIF_OTHER_BSS |

		  FIF_BCN_PRBRESP_PROMISC;



	changed &= FIF_PROMISC_IN_BSS |

		   FIF_ALLMULTI |

		   FIF_FCSFAIL |

		   FIF_PLCPFAIL |

		   FIF_CONTROL |

		   FIF_OTHER_BSS |

		   FIF_BCN_PRBRESP_PROMISC;



	wl->filter_flags = *fflags;



	if (changed && b43_status(dev) >= B43_STAT_INITIALIZED)

		b43_adjust_opmode(dev);

	}

	spin_unlock_irqrestore(&wl->irq_lock, flags);

}
@@ -3032,7 +3027,6 @@ static int b43_config_interface(struct ieee80211_hw *hw, 
		return -ENODEV;

	mutex_lock(&wl->mutex);

	spin_lock_irqsave(&wl->irq_lock, flags);

	if (conf->type != IEEE80211_IF_TYPE_MNTR) {

	B43_WARN_ON(wl->if_id != if_id);

	if (conf->bssid)

		memcpy(wl->bssid, conf->bssid, ETH_ALEN);
@@ -3047,7 +3041,6 @@ static int b43_config_interface(struct ieee80211_hw *hw, 
		}

		b43_write_mac_bssid_templates(dev);

	}

	}

	spin_unlock_irqrestore(&wl->irq_lock, flags);

	mutex_unlock(&wl->mutex);
@@ -3472,7 +3465,8 @@ static int b43_wireless_core_init(struct b43_wldev *dev) 


	ssb_bus_powerup(bus, 1);	/* Enable dynamic PCTL */

	memset(wl->bssid, 0, ETH_ALEN);

	b43_upload_card_macaddress(dev, NULL);

	memset(wl->mac_addr, 0, ETH_ALEN);

	b43_upload_card_macaddress(dev);

	b43_security_init(dev);

	b43_rng_init(wl);
@@ -3502,42 +3496,30 @@ static int b43_add_interface(struct ieee80211_hw *hw, 
	struct b43_wldev *dev;

	unsigned long flags;

	int err = -EOPNOTSUPP;

	int did_init = 0;



	/* TODO: allow WDS/AP devices to coexist */



	if (conf->type != IEEE80211_IF_TYPE_AP &&

	    conf->type != IEEE80211_IF_TYPE_STA &&

	    conf->type != IEEE80211_IF_TYPE_WDS &&

	    conf->type != IEEE80211_IF_TYPE_IBSS)

		return -EOPNOTSUPP;



	mutex_lock(&wl->mutex);

	if ((conf->type != IEEE80211_IF_TYPE_MNTR) && wl->operating)

	if (wl->operating)

		goto out_mutex_unlock;



	b43dbg(wl, "Adding Interface type %d\n", conf->type);



	dev = wl->current_dev;

	if (b43_status(dev) < B43_STAT_INITIALIZED) {

		err = b43_wireless_core_init(dev);

		if (err)

			goto out_mutex_unlock;

		did_init = 1;

	}

	if (b43_status(dev) < B43_STAT_STARTED) {

		err = b43_wireless_core_start(dev);

		if (err) {

			if (did_init)

				b43_wireless_core_exit(dev);

			goto out_mutex_unlock;

		}

	}



	spin_lock_irqsave(&wl->irq_lock, flags);

	switch (conf->type) {

	case IEEE80211_IF_TYPE_MNTR:

		wl->monitor++;

		break;

	default:

	wl->operating = 1;

	wl->if_id = conf->if_id;

	wl->if_type = conf->type;

		b43_upload_card_macaddress(dev, conf->mac_addr);

	}

	memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);



	spin_lock_irqsave(&wl->irq_lock, flags);

	b43_adjust_opmode(dev);

	b43_upload_card_macaddress(dev);

	spin_unlock_irqrestore(&wl->irq_lock, flags);



	err = 0;
@@ -3551,34 +3533,67 @@ static void b43_remove_interface(struct ieee80211_hw *hw, 
				 struct ieee80211_if_init_conf *conf)

{

	struct b43_wl *wl = hw_to_b43_wl(hw);

	struct b43_wldev *dev;

	struct b43_wldev *dev = wl->current_dev;

	unsigned long flags;



	b43dbg(wl, "Removing Interface type %d\n", conf->type);



	mutex_lock(&wl->mutex);

	if (conf->type == IEEE80211_IF_TYPE_MNTR) {

		wl->monitor--;

		B43_WARN_ON(wl->monitor < 0);

	} else {



	B43_WARN_ON(!wl->operating);

	B43_WARN_ON(wl->if_id != conf->if_id);



	wl->operating = 0;

	}



	dev = wl->current_dev;

	if (!wl->operating && wl->monitor == 0) {

		/* No interface left. */

		if (b43_status(dev) >= B43_STAT_STARTED)

			b43_wireless_core_stop(dev);

		b43_wireless_core_exit(dev);

	} else {

		/* Just monitor interfaces left. */

	spin_lock_irqsave(&wl->irq_lock, flags);

	b43_adjust_opmode(dev);

		if (!wl->operating)

			b43_upload_card_macaddress(dev, NULL);

	memset(wl->mac_addr, 0, ETH_ALEN);

	b43_upload_card_macaddress(dev);

	spin_unlock_irqrestore(&wl->irq_lock, flags);



	mutex_unlock(&wl->mutex);

}



static int b43_start(struct ieee80211_hw *hw)

{

	struct b43_wl *wl = hw_to_b43_wl(hw);

	struct b43_wldev *dev = wl->current_dev;

	int did_init = 0;

	int err;



	mutex_lock(&wl->mutex);



	if (b43_status(dev) < B43_STAT_INITIALIZED) {

		err = b43_wireless_core_init(dev);

		if (err)

			goto out_mutex_unlock;

		did_init = 1;

	}



	if (b43_status(dev) < B43_STAT_STARTED) {

		err = b43_wireless_core_start(dev);

		if (err) {

			if (did_init)

				b43_wireless_core_exit(dev);

			goto out_mutex_unlock;

		}

	}



 out_mutex_unlock:

	mutex_unlock(&wl->mutex);



	return err;

}



void b43_stop(struct ieee80211_hw *hw)

{

	struct b43_wl *wl = hw_to_b43_wl(hw);

	struct b43_wldev *dev = wl->current_dev;



	mutex_lock(&wl->mutex);

	if (b43_status(dev) >= B43_STAT_STARTED)

		b43_wireless_core_stop(dev);

	b43_wireless_core_exit(dev);

	mutex_unlock(&wl->mutex);

}
@@ -3589,10 +3604,12 @@ static const struct ieee80211_ops b43_hw_ops = { 
	.remove_interface = b43_remove_interface,

	.config = b43_dev_config,

	.config_interface = b43_config_interface,

	.set_multicast_list = b43_set_multicast_list,

	.configure_filter = b43_configure_filter,

	.set_key = b43_dev_set_key,

	.get_stats = b43_get_stats,

	.get_tx_stats = b43_get_tx_stats,

	.start = b43_start,

	.stop = b43_stop,

};



/* Hard-reset the chip. Do not call this directly.
@@ -3930,8 +3947,7 @@ static int b43_wireless_init(struct ssb_device *dev) 
	}



	/* fill hw info */

	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |

	    IEEE80211_HW_MONITOR_DURING_OPER;

	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;

	hw->max_signal = 100;

	hw->max_rssi = -110;

	hw->max_noise = -110;

drivers/net/wireless/b43legacy/b43legacy.h

+7 −13
Original line number Diff line number Diff line
@@ -179,6 +179,7 @@ 
#define B43legacy_MACCTL_IHR_ENABLED	0x00000400 /* IHR Region Enabled */

#define B43legacy_MACCTL_INFRA		0x00020000 /* Infrastructure mode */

#define B43legacy_MACCTL_AP		0x00040000 /* AccessPoint mode */

#define B43legacy_MACCTL_BEACPROMISC	0x00100000 /* Beacon Promiscuous */

#define B43legacy_MACCTL_KEEP_BADPLCP	0x00200000 /* Keep bad PLCP frames */

#define B43legacy_MACCTL_KEEP_CTL	0x00400000 /* Keep control frames */

#define B43legacy_MACCTL_KEEP_BAD	0x00800000 /* Keep bad frames (FCS) */
@@ -570,25 +571,20 @@ struct b43legacy_wl { 
	 * at a time. General information about this interface follows.

	 */



	/* Opaque ID of the operating interface (!= monitor

	 * interface) from the ieee80211 subsystem.

	 * Do not modify.

	/* Opaque ID of the operating interface from the ieee80211

	 * subsystem. Do not modify.

	 */

	int if_id;

	/* MAC address (can be NULL). */

	const u8 *mac_addr;

	u8 mac_addr[ETH_ALEN];

	/* Current BSSID (can be NULL). */

	const u8 *bssid;

	u8 bssid[ETH_ALEN];

	/* Interface type. (IEEE80211_IF_TYPE_XXX) */

	int if_type;

	/* Counter of active monitor interfaces. */

	int monitor;

	/* Is the card operating in AP, STA or IBSS mode? */

	bool operating;

	/* Promisc mode active?

	 * Note that (monitor != 0) implies promisc.

	 */

	bool promisc;

	/* filter flags */

	unsigned int filter_flags;

	/* Stats about the wireless interface */

	struct ieee80211_low_level_stats ieee_stats;
@@ -753,8 +749,6 @@ struct b43legacy_wldev *dev_to_b43legacy_wldev(struct device *dev) 
static inline

int b43legacy_is_mode(struct b43legacy_wl *wl, int type)

{

	if (type == IEEE80211_IF_TYPE_MNTR)

		return !!(wl->monitor);

	return (wl->operating &&

		wl->if_type == type);

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE