Commit 406910a8 authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 



Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2017-03-20

This series contains updates to i40e and i40evf only.

Philippe Reynes updates i40e and i40evf to use the new ethtool API for
{get|set}_link_ksettings.

Jake provides the remaining patches in the series, starting with a fix
for i40e where the firmware expected the port numbers for the offloaded
UDP tunnels in Little Endian format and we were sending them in Big Endian
format which put the wrong port number to be put in the UDP tunnel list.
Changed the driver to use __be32 values instead of arrays for
(src|dst)_ip.  Refactored the exit flow of i40e_add_fdir_ethtool() which
removes the dependency on having a non-zero return value.  Fixed a memory
leak by running kfree() and returning immediately when we fail to add
flow director filter.  Fixed a potential issue where could update the
filter count without actually succeeding in adding a filter, by moving
the ATR exit check to after we have sent the TCP/IPv4 filter to the ring
successfully.  Ensures that the fd_tcp_rule count is reset to 0, before
we reprogram the filters so that we do not end up with a stale count
which does not correctly reflect the number of programmed filters.  Added
a check whether we have TCP/IPv4 filters before re-enabling ATR after
flushing and replaying FDIR filters.  Added counters for each filter
type in preparation for adding code to properly check the mask value.
Fixed potential issues by explicitly checking the flow type at the
start of i40e_add_fdir_ethtool().  To avoid possible memory leaks,
we now unconditionally delete the old filter, even if it is identical to
the new filter and ensures will always update the filters as expected.
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 41e95736 c6da525d

drivers/net/ethernet/intel/i40e/i40e.h

+12 −4
Original line number Diff line number Diff line
@@ -208,8 +208,8 @@ struct i40e_fdir_filter { 
	u8 flow_type;

	u8 ip4_proto;

	/* TX packet view of src and dst */

	__be32 dst_ip[4];

	__be32 src_ip[4];

	__be32 dst_ip;

	__be32 src_ip;

	__be16 src_port;

	__be16 dst_port;

	__be32 sctp_v_tag;
@@ -244,7 +244,8 @@ struct i40e_tc_configuration { 
};



struct i40e_udp_port_config {

	__be16 index;

	/* AdminQ command interface expects port number in Host byte order */

	u16 index;

	u8 type;

};
@@ -285,7 +286,14 @@ struct i40e_pf { 
	u32 fd_flush_cnt;

	u32 fd_add_err;

	u32 fd_atr_cnt;

	u32 fd_tcp_rule;



	/* Book-keeping of side-band filter count per flow-type.

	 * This is used to detect and handle input set changes for

	 * respective flow-type.

	 */

	u16 fd_tcp4_filter_cnt;

	u16 fd_udp4_filter_cnt;

	u16 fd_ip4_filter_cnt;



	struct i40e_udp_port_config udp_ports[I40E_MAX_PF_UDP_OFFLOAD_PORTS];

	u16 pending_udp_bitmap;

drivers/net/ethernet/intel/i40e/i40e_ethtool.c

+179 −144

File changed.

Preview size limit exceeded, changes collapsed.

drivers/net/ethernet/intel/i40e/i40e_main.c

+23 −20
Original line number Diff line number Diff line
@@ -3283,6 +3283,11 @@ static void i40e_fdir_filter_restore(struct i40e_vsi *vsi) 
	if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))

		return;



	/* Reset FDir counters as we're replaying all existing filters */

	pf->fd_tcp4_filter_cnt = 0;

	pf->fd_udp4_filter_cnt = 0;

	pf->fd_ip4_filter_cnt = 0;



	hlist_for_each_entry_safe(filter, node,

				  &pf->fdir_filter_list, fdir_node) {

		i40e_add_del_fdir(vsi, filter, true);
@@ -5465,13 +5470,8 @@ static int i40e_up_complete(struct i40e_vsi *vsi) 
	/* replay FDIR SB filters */

	if (vsi->type == I40E_VSI_FDIR) {

		/* reset fd counters */

		pf->fd_add_err = pf->fd_atr_cnt = 0;

		if (pf->fd_tcp_rule > 0) {

			pf->hw_disabled_flags |= I40E_FLAG_FD_ATR_ENABLED;

			if (I40E_DEBUG_FD & pf->hw.debug_mask)

				dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 exist\n");

			pf->fd_tcp_rule = 0;

		}

		pf->fd_add_err = 0;

		pf->fd_atr_cnt = 0;

		i40e_fdir_filter_restore(vsi);

	}
@@ -5754,7 +5754,11 @@ static void i40e_fdir_filter_exit(struct i40e_pf *pf) 
		hlist_del(&filter->fdir_node);

		kfree(filter);

	}



	pf->fdir_pf_active_filters = 0;

	pf->fd_tcp4_filter_cnt = 0;

	pf->fd_udp4_filter_cnt = 0;

	pf->fd_ip4_filter_cnt = 0;

}



/**
@@ -6159,7 +6163,7 @@ void i40e_fdir_check_and_reenable(struct i40e_pf *pf) 
	if (fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM * 2)) {

		if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&

		    (pf->hw_disabled_flags & I40E_FLAG_FD_ATR_ENABLED) &&

		    (pf->fd_tcp_rule == 0)) {

		    (pf->fd_tcp4_filter_cnt == 0)) {

			pf->hw_disabled_flags &= ~I40E_FLAG_FD_ATR_ENABLED;

			if (I40E_DEBUG_FD & pf->hw.debug_mask)

				dev_info(&pf->pdev->dev, "ATR is being enabled since we have space in the table and there are no conflicting ntuple rules\n");
@@ -6231,7 +6235,7 @@ static void i40e_fdir_flush_and_replay(struct i40e_pf *pf) 
	} else {

		/* replay sideband filters */

		i40e_fdir_filter_restore(pf->vsi[pf->lan_vsi]);

		if (!disable_atr)

		if (!disable_atr && !pf->fd_tcp4_filter_cnt)

			pf->hw_disabled_flags &= ~I40E_FLAG_FD_ATR_ENABLED;

		clear_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state);

		if (I40E_DEBUG_FD & pf->hw.debug_mask)
@@ -7353,7 +7357,7 @@ static void i40e_sync_udp_filters_subtask(struct i40e_pf *pf) 
{

	struct i40e_hw *hw = &pf->hw;

	i40e_status ret;

	__be16 port;

	u16 port;

	int i;



	if (!(pf->flags & I40E_FLAG_UDP_FILTER_SYNC))
@@ -7377,7 +7381,7 @@ static void i40e_sync_udp_filters_subtask(struct i40e_pf *pf) 
					"%s %s port %d, index %d failed, err %s aq_err %s\n",

					pf->udp_ports[i].type ? "vxlan" : "geneve",

					port ? "add" : "delete",

					ntohs(port), i,

					port, i,

					i40e_stat_str(&pf->hw, ret),

					i40e_aq_str(&pf->hw,

						    pf->hw.aq.asq_last_status));
@@ -8940,8 +8944,8 @@ bool i40e_set_ntuple(struct i40e_pf *pf, netdev_features_t features) 
		pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;

		pf->hw_disabled_flags &= ~I40E_FLAG_FD_SB_ENABLED;

		/* reset fd counters */

		pf->fd_add_err = pf->fd_atr_cnt = pf->fd_tcp_rule = 0;

		pf->fdir_pf_active_filters = 0;

		pf->fd_add_err = 0;

		pf->fd_atr_cnt = 0;

		/* if ATR was auto disabled it can be re-enabled. */

		if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&

		    (pf->hw_disabled_flags & I40E_FLAG_FD_ATR_ENABLED)) {
@@ -9014,7 +9018,7 @@ static int i40e_set_features(struct net_device *netdev, 
 *

 * Returns the index number or I40E_MAX_PF_UDP_OFFLOAD_PORTS if port not found

 **/

static u8 i40e_get_udp_port_idx(struct i40e_pf *pf, __be16 port)

static u8 i40e_get_udp_port_idx(struct i40e_pf *pf, u16 port)

{

	u8 i;
@@ -9037,7 +9041,7 @@ static void i40e_udp_tunnel_add(struct net_device *netdev, 
	struct i40e_netdev_priv *np = netdev_priv(netdev);

	struct i40e_vsi *vsi = np->vsi;

	struct i40e_pf *pf = vsi->back;

	__be16 port = ti->port;

	u16 port = ntohs(ti->port);

	u8 next_idx;

	u8 idx;
@@ -9045,8 +9049,7 @@ static void i40e_udp_tunnel_add(struct net_device *netdev, 


	/* Check if port already exists */

	if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {

		netdev_info(netdev, "port %d already offloaded\n",

			    ntohs(port));

		netdev_info(netdev, "port %d already offloaded\n", port);

		return;

	}
@@ -9055,7 +9058,7 @@ static void i40e_udp_tunnel_add(struct net_device *netdev, 


	if (next_idx == I40E_MAX_PF_UDP_OFFLOAD_PORTS) {

		netdev_info(netdev, "maximum number of offloaded UDP ports reached, not adding port %d\n",

			    ntohs(port));

			    port);

		return;

	}
@@ -9089,7 +9092,7 @@ static void i40e_udp_tunnel_del(struct net_device *netdev, 
	struct i40e_netdev_priv *np = netdev_priv(netdev);

	struct i40e_vsi *vsi = np->vsi;

	struct i40e_pf *pf = vsi->back;

	__be16 port = ti->port;

	u16 port = ntohs(ti->port);

	u8 idx;



	idx = i40e_get_udp_port_idx(pf, port);
@@ -9121,7 +9124,7 @@ static void i40e_udp_tunnel_del(struct net_device *netdev, 
	return;

not_found:

	netdev_warn(netdev, "UDP port %d was not found, not deleting\n",

		    ntohs(port));

		    port);

}



static int i40e_get_phys_port_id(struct net_device *netdev,

drivers/net/ethernet/intel/i40e/i40e_txrx.c

+44 −40

File changed.

Preview size limit exceeded, changes collapsed.

drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c

+15 −16
Original line number Diff line number Diff line
@@ -64,51 +64,50 @@ static const struct i40evf_stats i40evf_gstrings_stats[] = { 
	(I40EVF_GLOBAL_STATS_LEN + I40EVF_QUEUE_STATS_LEN(_dev))



/**

 * i40evf_get_settings - Get Link Speed and Duplex settings

 * i40evf_get_link_ksettings - Get Link Speed and Duplex settings

 * @netdev: network interface device structure

 * @ecmd: ethtool command

 * @cmd: ethtool command

 *

 * Reports speed/duplex settings. Because this is a VF, we don't know what

 * kind of link we really have, so we fake it.

 **/

static int i40evf_get_settings(struct net_device *netdev,

			       struct ethtool_cmd *ecmd)

static int i40evf_get_link_ksettings(struct net_device *netdev,

				     struct ethtool_link_ksettings *cmd)

{

	struct i40evf_adapter *adapter = netdev_priv(netdev);



	ecmd->supported = 0;

	ecmd->autoneg = AUTONEG_DISABLE;

	ecmd->transceiver = XCVR_DUMMY1;

	ecmd->port = PORT_NONE;

	ethtool_link_ksettings_zero_link_mode(cmd, supported);

	cmd->base.autoneg = AUTONEG_DISABLE;

	cmd->base.port = PORT_NONE;

	/* Set speed and duplex */

	switch (adapter->link_speed) {

	case I40E_LINK_SPEED_40GB:

		ethtool_cmd_speed_set(ecmd, SPEED_40000);

		cmd->base.speed = SPEED_40000;

		break;

	case I40E_LINK_SPEED_25GB:

#ifdef SPEED_25000

		ethtool_cmd_speed_set(ecmd, SPEED_25000);

		cmd->base.speed = SPEED_25000;

#else

		netdev_info(netdev,

			    "Speed is 25G, display not supported by this version of ethtool.\n");

#endif

		break;

	case I40E_LINK_SPEED_20GB:

		ethtool_cmd_speed_set(ecmd, SPEED_20000);

		cmd->base.speed = SPEED_20000;

		break;

	case I40E_LINK_SPEED_10GB:

		ethtool_cmd_speed_set(ecmd, SPEED_10000);

		cmd->base.speed = SPEED_10000;

		break;

	case I40E_LINK_SPEED_1GB:

		ethtool_cmd_speed_set(ecmd, SPEED_1000);

		cmd->base.speed = SPEED_1000;

		break;

	case I40E_LINK_SPEED_100MB:

		ethtool_cmd_speed_set(ecmd, SPEED_100);

		cmd->base.speed = SPEED_100;

		break;

	default:

		break;

	}

	ecmd->duplex = DUPLEX_FULL;

	cmd->base.duplex = DUPLEX_FULL;



	return 0;

}
@@ -643,7 +642,6 @@ static int i40evf_set_rxfh(struct net_device *netdev, const u32 *indir, 
}



static const struct ethtool_ops i40evf_ethtool_ops = {

	.get_settings		= i40evf_get_settings,

	.get_drvinfo		= i40evf_get_drvinfo,

	.get_link		= ethtool_op_get_link,

	.get_ringparam		= i40evf_get_ringparam,
@@ -663,6 +661,7 @@ static const struct ethtool_ops i40evf_ethtool_ops = { 
	.set_rxfh		= i40evf_set_rxfh,

	.get_channels		= i40evf_get_channels,

	.get_rxfh_key_size	= i40evf_get_rxfh_key_size,

	.get_link_ksettings	= i40evf_get_link_ksettings,

};



/**

CRA Git | Maintained and supported by SUSTech CRA and CCSE