drivers/clk/samsung/clk-s3c2410.c
0 → 100644
+477
−0
include/dt-bindings/clock/s3c2410.h
0 → 100644
+62
−0
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
This driver can handle the clock controllers of the socs mentioned above, as they share a common clock tree with only small differences. The clock structure is built according to the manuals of the included SoCs and might include changes in comparison to the previous clock structure. As pll-rate-tables only the 12mhz variants are currently included. The original code was wrongly checking for 169mhz xti values [a 0 to much at the end], so the original 16mhz pll table would have never been included and its values are so obscure that I have no possibility to at least check their sane-ness. When using the formula from the manual the resulting frequency is near the table value but still slightly off. Signed-off-by:Heiko Stuebner <heiko@sntech.de> Acked-by:
Mike Turquette <mturquette@linaro.org> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
CRA Git | Maintained and supported by SUSTech CRA and CCSE