ARM: dts: imx53: Update USB configuration on M53Menlo (3c3601cd) · Commits · 戴 / test

Turn USBH1 into Host and update the GPIO polarity of the regulator to match new hardware. Signed-off-by:

Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Reviewed-by:

Fabio Estevam <festevam@gmail.com> Signed-off-by:

Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx53-m53menlo.dts

+7 −4

Original line number	Diff line number	Diff line
		@@ -50,7 +50,8 @@
		regulator-name = "vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		};
		};

		@@ -268,8 +269,10 @@

		pinctrl_usb: usbgrp {
		fsl,pins = <
		MX53_PAD_GPIO_2__GPIO1_2 0x1d5
		MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5
		MX53_PAD_GPIO_2__GPIO1_2 0x1c4
		MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4
		MX53_PAD_GPIO_4__GPIO1_4 0x1c4
		MX53_PAD_GPIO_18__GPIO7_13 0x1c4
		>;
		};
		};
		@@ -322,7 +325,7 @@
		pinctrl-0 = <&pinctrl_usb>;
		vbus-supply = <&reg_usbh1_vbus>;
		phy_type = "utmi";
		dr_mode = "peripheral";
		dr_mode = "host";
		status = "okay";
		};

Admin message