Commit 3c2d0ed2 authored by Sonic Zhang's avatar Sonic Zhang Committed by Greg Kroah-Hartman
Browse files

serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width. 



Change hardware flow control code to adapt to both bf5xx and bf60x.
Disabled serial device before set termios for bf60x.

Signed-off-by: default avatarSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: default avatarBob Liu <lliubbo@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 239c25b1

drivers/tty/serial/bfin_uart.c

+10 −12
Original line number Diff line number Diff line
@@ -549,7 +549,7 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) 
static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)

{

	struct bfin_serial_port *uart = dev_id;

	unsigned short irqstat;

	unsigned int irqstat;

	int x_pos, pos;



	spin_lock(&uart->rx_lock);
@@ -582,7 +582,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) 
static unsigned int bfin_serial_tx_empty(struct uart_port *port)

{

	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;

	unsigned short lsr;

	unsigned int lsr;



	lsr = UART_GET_LSR(uart);

	if (lsr & TEMT)
@@ -741,7 +741,7 @@ static int bfin_serial_startup(struct uart_port *port) 
		}



		/* CTS RTS PINs are negative assertive. */

		UART_PUT_MCR(uart, ACTS);

		UART_PUT_MCR(uart, UART_GET_MCR(uart) | ACTS);

		UART_SET_IER(uart, EDSSI);

	}

#endif
@@ -799,7 +799,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, 
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;

	unsigned long flags;

	unsigned int baud, quot;

	unsigned short val, ier, lcr = 0;

	unsigned int ier, lcr = 0;



	switch (termios->c_cflag & CSIZE) {

	case CS8:
@@ -871,6 +871,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, 


	/* Disable UART */

	ier = UART_GET_IER(uart);

	UART_PUT_GCTL(uart, UART_GET_GCTL(uart) & ~UCEN);

	UART_DISABLE_INTS(uart);



	/* Set DLAB in LCR to Access CLK */
@@ -882,14 +883,11 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, 
	/* Clear DLAB in LCR to Access THR RBR IER */

	UART_CLEAR_DLAB(uart);



	UART_PUT_LCR(uart, lcr);

	UART_PUT_LCR(uart, (UART_GET_LCR(uart) & ~LCR_MASK) | lcr);



	/* Enable UART */

	UART_ENABLE_INTS(uart, ier);



	val = UART_GET_GCTL(uart);

	val |= UCEN;

	UART_PUT_GCTL(uart, val);

	UART_PUT_GCTL(uart, UART_GET_GCTL(uart) | UCEN);



	/* Port speed changed, update the per-port timeout. */

	uart_update_timeout(port, termios->c_cflag, baud);
@@ -949,7 +947,7 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) 
static void bfin_serial_set_ldisc(struct uart_port *port, int ld)

{

	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;

	unsigned short val;

	unsigned int val;



	switch (ld) {

	case N_IRDA:
@@ -967,7 +965,7 @@ static void bfin_serial_set_ldisc(struct uart_port *port, int ld) 
static void bfin_serial_reset_irda(struct uart_port *port)

{

	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;

	unsigned short val;

	unsigned int val;



	val = UART_GET_GCTL(uart);

	val &= ~(UMOD_MASK | RPOLC);
@@ -1065,7 +1063,7 @@ static void __init 
bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,

			   int *parity, int *bits)

{

	unsigned short status;

	unsigned int status;



	status = UART_GET_IER(uart) & (ERBFI | ETBEI);

	if (status == (ERBFI | ETBEI)) {

CRA Git | Maintained and supported by SUSTech CRA and CCSE