ARM: dts: da850: add cpu node and operating points to DT

		reg = <0xc0000000 0x0>;

	};

	cpus {

		#address-cells = <1>;

		#size-cells = <0>;

		cpu: cpu@0 {

			compatible = "arm,arm926ej-s";

			device_type = "cpu";

			reg = <0>;

			clocks = <&psc0 14>;

			operating-points-v2 = <&opp_table>;

		};

	};

	opp_table: opp-table {

		compatible = "operating-points-v2";

		opp_100: opp100-100000000 {

			opp-hz = /bits/ 64 <100000000>;

			opp-microvolt = <1000000 950000 1050000>;

		};

		opp_200: opp110-200000000 {

			opp-hz = /bits/ 64 <200000000>;

			opp-microvolt = <1100000 1050000 1160000>;

		};

		opp_300: opp120-300000000 {

			opp-hz = /bits/ 64 <300000000>;

			opp-microvolt = <1200000 1140000 1320000>;

		};

		/*

		 * Original silicon was 300MHz max, so higher frequencies

		 * need to be enabled on a per-board basis if the chip is

		 * capable.

		 */

		opp_375: opp120-375000000 {

			status = "disabled";

			opp-hz = /bits/ 64 <375000000>;

			opp-microvolt = <1200000 1140000 1320000>;

		};

		opp_456: opp130-456000000 {

			status = "disabled";

			opp-hz = /bits/ 64 <456000000>;

			opp-microvolt = <1300000 1250000 1350000>;

		};

	};

	arm {

		#address-cells = <1>;

		#size-cells = <1>;