+732
−0
File added.
Preview size limit exceeded, changes collapsed.
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
This patch enables hardware timestamping for use with PTP software by extracting a ns counter from an arbitrary fixed point cycles counter. The hardware generates SYSTIME registers using the DMA tick which changes based on the current link speed. These SYSTIME registers are converted to ns using the cyclecounter and timecounter structures provided by the kernel. Using the SO_TIMESTAMPING api, software can enable and access timestamps for PTP packets. The SO_TIMESTAMPING API has space for 3 different kinds of timestamps, SYS, RAW, and SOF. SYS hardware timestamps are hardware ns values that are then scaled to the software clock. RAW hardware timestamps are the direct raw value of the ns counter. SOF software timestamps are the software timestamp calculated as close as possible to the software transmit, but are not offloaded to the hardware. This patch only supports the RAW hardware timestamps due to inefficiency of the SYS design. This patch also enables the PHC subsystem features for atomically adjusting the cycle register, and adjusting the clock frequency in parts per billion. This frequency adjustment works by slightly adjusting the value added to the cycle registers each DMA tick. This causes the hardware registers to overflow rapidly (approximately once every 34 seconds, when at 10gig link). To solve this, the timecounter structure is used, along with a timer set for every 25 seconds. This allows for detecting register overflow and converting the cycle counter registers into ns values needed for providing useful timestamps to the network stack. Only the basic required clock functions are supported at this time, although the hardware supports some ancillary features and these could easily be enabled in the future. Note that use of this hardware timestamping requires modifying daemon software to use the SO_TIMESTAMPING API for timestamps, and the ptp_clock PHC framework for accessing the clock. The timestamps have no relation to the system time at all, so software must use the posix clock generated by the PHC framework instead. Signed-off-by:Jacob E Keller <jacob.e.keller@intel.com> Tested-by:
Stephen Ko <stephen.s.ko@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
File added.
Preview size limit exceeded, changes collapsed.
CRA Git | Maintained and supported by SUSTech CRA and CCSE