MIPS: Netlogic: Platform NAND/NOR flash support (3a2f9b99) · Commits · 戴 / test

arch/mips/include/asm/netlogic/xlr/bridge.h

0 → 100644

+104 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2003-2012 Broadcom Corporation
		* All Rights Reserved
		*
		* This software is available to you under a choice of one of two
		* licenses. You may choose to be licensed under the terms of the GNU
		* General Public License (GPL) Version 2, available from the file
		* COPYING in the main directory of this source tree, or the Broadcom
		* license below:
		*
		* Redistribution and use in source and binary forms, with or without
		* modification, are permitted provided that the following conditions
		* are met:
		*
		* 1. Redistributions of source code must retain the above copyright
		* notice, this list of conditions and the following disclaimer.
		* 2. Redistributions in binary form must reproduce the above copyright
		* notice, this list of conditions and the following disclaimer in
		* the documentation and/or other materials provided with the
		* distribution.
		*
		* THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
		* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
		* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
		* ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
		* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
		* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
		* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
		* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
		* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
		* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
		* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
		*/
		#ifndef _ASM_NLM_BRIDGE_H_
		#define _ASM_NLM_BRIDGE_H_

		#define BRIDGE_DRAM_0_BAR 0
		#define BRIDGE_DRAM_1_BAR 1
		#define BRIDGE_DRAM_2_BAR 2
		#define BRIDGE_DRAM_3_BAR 3
		#define BRIDGE_DRAM_4_BAR 4
		#define BRIDGE_DRAM_5_BAR 5
		#define BRIDGE_DRAM_6_BAR 6
		#define BRIDGE_DRAM_7_BAR 7
		#define BRIDGE_DRAM_CHN_0_MTR_0_BAR 8
		#define BRIDGE_DRAM_CHN_0_MTR_1_BAR 9
		#define BRIDGE_DRAM_CHN_0_MTR_2_BAR 10
		#define BRIDGE_DRAM_CHN_0_MTR_3_BAR 11
		#define BRIDGE_DRAM_CHN_0_MTR_4_BAR 12
		#define BRIDGE_DRAM_CHN_0_MTR_5_BAR 13
		#define BRIDGE_DRAM_CHN_0_MTR_6_BAR 14
		#define BRIDGE_DRAM_CHN_0_MTR_7_BAR 15
		#define BRIDGE_DRAM_CHN_1_MTR_0_BAR 16
		#define BRIDGE_DRAM_CHN_1_MTR_1_BAR 17
		#define BRIDGE_DRAM_CHN_1_MTR_2_BAR 18
		#define BRIDGE_DRAM_CHN_1_MTR_3_BAR 19
		#define BRIDGE_DRAM_CHN_1_MTR_4_BAR 20
		#define BRIDGE_DRAM_CHN_1_MTR_5_BAR 21
		#define BRIDGE_DRAM_CHN_1_MTR_6_BAR 22
		#define BRIDGE_DRAM_CHN_1_MTR_7_BAR 23
		#define BRIDGE_CFG_BAR 24
		#define BRIDGE_PHNX_IO_BAR 25
		#define BRIDGE_FLASH_BAR 26
		#define BRIDGE_SRAM_BAR 27
		#define BRIDGE_HTMEM_BAR 28
		#define BRIDGE_HTINT_BAR 29
		#define BRIDGE_HTPIC_BAR 30
		#define BRIDGE_HTSM_BAR 31
		#define BRIDGE_HTIO_BAR 32
		#define BRIDGE_HTCFG_BAR 33
		#define BRIDGE_PCIXCFG_BAR 34
		#define BRIDGE_PCIXMEM_BAR 35
		#define BRIDGE_PCIXIO_BAR 36
		#define BRIDGE_DEVICE_MASK 37
		#define BRIDGE_AERR_INTR_LOG1 38
		#define BRIDGE_AERR_INTR_LOG2 39
		#define BRIDGE_AERR_INTR_LOG3 40
		#define BRIDGE_AERR_DEV_STAT 41
		#define BRIDGE_AERR1_LOG1 42
		#define BRIDGE_AERR1_LOG2 43
		#define BRIDGE_AERR1_LOG3 44
		#define BRIDGE_AERR1_DEV_STAT 45
		#define BRIDGE_AERR_INTR_EN 46
		#define BRIDGE_AERR_UPG 47
		#define BRIDGE_AERR_CLEAR 48
		#define BRIDGE_AERR1_CLEAR 49
		#define BRIDGE_SBE_COUNTS 50
		#define BRIDGE_DBE_COUNTS 51
		#define BRIDGE_BITERR_INT_EN 52

		#define BRIDGE_SYS2IO_CREDITS 53
		#define BRIDGE_EVNT_CNT_CTRL1 54
		#define BRIDGE_EVNT_COUNTER1 55
		#define BRIDGE_EVNT_CNT_CTRL2 56
		#define BRIDGE_EVNT_COUNTER2 57
		#define BRIDGE_RESERVED1 58

		#define BRIDGE_DEFEATURE 59
		#define BRIDGE_SCRATCH0 60
		#define BRIDGE_SCRATCH1 61
		#define BRIDGE_SCRATCH2 62
		#define BRIDGE_SCRATCH3 63

		#endif

arch/mips/include/asm/netlogic/xlr/flash.h

0 → 100644

+55 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2003-2012 Broadcom Corporation
		* All Rights Reserved
		*
		* This software is available to you under a choice of one of two
		* licenses. You may choose to be licensed under the terms of the GNU
		* General Public License (GPL) Version 2, available from the file
		* COPYING in the main directory of this source tree, or the Broadcom
		* license below:
		*
		* Redistribution and use in source and binary forms, with or without
		* modification, are permitted provided that the following conditions
		* are met:
		*
		* 1. Redistributions of source code must retain the above copyright
		* notice, this list of conditions and the following disclaimer.
		* 2. Redistributions in binary form must reproduce the above copyright
		* notice, this list of conditions and the following disclaimer in
		* the documentation and/or other materials provided with the
		* distribution.
		*
		* THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
		* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
		* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
		* ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
		* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
		* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
		* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
		* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
		* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
		* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
		* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
		*/
		#ifndef _ASM_NLM_FLASH_H_
		#define _ASM_NLM_FLASH_H_

		#define FLASH_CSBASE_ADDR(cs) (cs)
		#define FLASH_CSADDR_MASK(cs) (0x10 + (cs))
		#define FLASH_CSDEV_PARM(cs) (0x20 + (cs))
		#define FLASH_CSTIME_PARMA(cs) (0x30 + (cs))
		#define FLASH_CSTIME_PARMB(cs) (0x40 + (cs))

		#define FLASH_INT_MASK 0x50
		#define FLASH_INT_STATUS 0x60
		#define FLASH_ERROR_STATUS 0x70
		#define FLASH_ERROR_ADDR 0x80

		#define FLASH_NAND_CLE(cs) (0x90 + (cs))
		#define FLASH_NAND_ALE(cs) (0xa0 + (cs))

		#define FLASH_NAND_CSDEV_PARAM 0x000041e6
		#define FLASH_NAND_CSTIME_PARAMA 0x4f400e22
		#define FLASH_NAND_CSTIME_PARAMB 0x000083cf

		#endif

arch/mips/netlogic/xlr/Makefile

+1 −1

Original line number	Diff line number	Diff line
		obj-y += setup.o platform.o
		obj-y += setup.o platform.o platform-flash.o
		obj-$(CONFIG_SMP) += wakeup.o

arch/mips/netlogic/xlr/platform-flash.c

0 → 100644

+220 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright 2011, Netlogic Microsystems.
		* Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
		*
		* This file is licensed under the terms of the GNU General Public
		* License version 2. This program is licensed "as is" without any
		* warranty of any kind, whether express or implied.
		*/

		#include <linux/device.h>
		#include <linux/platform_device.h>
		#include <linux/kernel.h>
		#include <linux/init.h>
		#include <linux/io.h>
		#include <linux/delay.h>
		#include <linux/ioport.h>
		#include <linux/resource.h>
		#include <linux/spi/flash.h>

		#include <linux/mtd/mtd.h>
		#include <linux/mtd/physmap.h>
		#include <linux/mtd/nand.h>
		#include <linux/mtd/partitions.h>

		#include <asm/netlogic/haldefs.h>
		#include <asm/netlogic/xlr/iomap.h>
		#include <asm/netlogic/xlr/flash.h>
		#include <asm/netlogic/xlr/bridge.h>
		#include <asm/netlogic/xlr/gpio.h>
		#include <asm/netlogic/xlr/xlr.h>

		/*
		* Default NOR partition layout
		*/
		static struct mtd_partition xlr_nor_parts[] = {
		{
		.name = "User FS",
		.offset = 0x800000,
		.size = MTDPART_SIZ_FULL,
		}
		};

		/*
		* Default NAND partition layout
		*/
		static struct mtd_partition xlr_nand_parts[] = {
		{
		.name = "Root Filesystem",
		.offset = 64 * 64 * 2048,
		.size = 432 * 64 * 2048,
		},
		{
		.name = "Home Filesystem",
		.offset = MTDPART_OFS_APPEND,
		.size = MTDPART_SIZ_FULL,
		},
		};

		/* Use PHYSMAP flash for NOR */
		struct physmap_flash_data xlr_nor_data = {
		.width = 2,
		.parts = xlr_nor_parts,
		.nr_parts = ARRAY_SIZE(xlr_nor_parts),
		};

		static struct resource xlr_nor_res[] = {
		{
		.flags = IORESOURCE_MEM,
		},
		};

		static struct platform_device xlr_nor_dev = {
		.name = "physmap-flash",
		.dev = {
		.platform_data = &xlr_nor_data,
		},
		.num_resources = ARRAY_SIZE(xlr_nor_res),
		.resource = xlr_nor_res,
		};

		const char *xlr_part_probes[] = { "cmdlinepart", NULL };

		/*
		* Use "gen_nand" driver for NAND flash
		*
		* There seems to be no way to store a private pointer containing
		* platform specific info in gen_nand drivier. We will use a global
		* struct for now, since we currently have only one NAND chip per board.
		*/
		struct xlr_nand_flash_priv {
		int cs;
		uint64_t flash_mmio;
		};

		static struct xlr_nand_flash_priv nand_priv;

		static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd,
		unsigned int ctrl)
		{
		if (ctrl & NAND_CLE)
		nlm_write_reg(nand_priv.flash_mmio,
		FLASH_NAND_CLE(nand_priv.cs), cmd);
		else if (ctrl & NAND_ALE)
		nlm_write_reg(nand_priv.flash_mmio,
		FLASH_NAND_ALE(nand_priv.cs), cmd);
		}

		struct platform_nand_data xlr_nand_data = {
		.chip = {
		.nr_chips = 1,
		.nr_partitions = ARRAY_SIZE(xlr_nand_parts),
		.chip_delay = 50,
		.partitions = xlr_nand_parts,
		.part_probe_types = xlr_part_probes,
		},
		.ctrl = {
		.cmd_ctrl = xlr_nand_ctrl,
		},
		};

		static struct resource xlr_nand_res[] = {
		{
		.flags = IORESOURCE_MEM,
		},
		};

		static struct platform_device xlr_nand_dev = {
		.name = "gen_nand",
		.id = -1,
		.num_resources = ARRAY_SIZE(xlr_nand_res),
		.resource = xlr_nand_res,
		.dev = {
		.platform_data = &xlr_nand_data,
		}
		};

		/*
		* XLR/XLS supports upto 8 devices on its FLASH interface. The value in
		* FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the
		* flash devices.
		* Under this, each flash device has an offset and size given by the
		* CSBASE_ADDR and CSBASE_MASK registers for the device.
		*
		* The CSBASE_ registers are expected to be setup by the bootloader.
		*/
		static void setup_flash_resource(uint64_t flash_mmio,
		uint64_t flash_map_base, int cs, struct resource *res)
		{
		u32 base, mask;

		base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs));
		mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs));

		res->start = flash_map_base + ((unsigned long)base << 16);
		res->end = res->start + (mask + 1) * 64 * 1024;
		}

		static int __init xlr_flash_init(void)
		{
		uint64_t gpio_mmio, flash_mmio, flash_map_base;
		u32 gpio_resetcfg, flash_bar;
		int cs, boot_nand, boot_nor;

		/* Flash address bits 39:24 is in bridge flash BAR */
		flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR);
		flash_map_base = (flash_bar & 0xffff0000) << 8;

		gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
		flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET);

		/* Get the chip reset config */
		gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG);

		/* Check for boot flash type */
		boot_nor = boot_nand = 0;
		if (nlm_chip_is_xls()) {
		/* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */
		if (gpio_resetcfg & (1 << 16))
		boot_nand = 1;

		/* check boot from PCMCIA, (GPIO reset reg bit 15 */
		if ((gpio_resetcfg & (1 << 15)) == 0)
		boot_nor = 1; /* not set, booted from NOR */
		} else { /* XLR */
		/* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */
		if ((gpio_resetcfg & (1 << 16)) == 0)
		boot_nor = 1; /* not set, booted from NOR */
		}

		/* boot flash at chip select 0 */
		cs = 0;

		if (boot_nand) {
		nand_priv.cs = cs;
		nand_priv.flash_mmio = flash_mmio;
		setup_flash_resource(flash_mmio, flash_map_base, cs,
		xlr_nand_res);

		/* Initialize NAND flash at CS 0 */
		nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs),
		FLASH_NAND_CSDEV_PARAM);
		nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs),
		FLASH_NAND_CSTIME_PARAMA);
		nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs),
		FLASH_NAND_CSTIME_PARAMB);

		pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res);
		return platform_device_register(&xlr_nand_dev);
		}

		if (boot_nor) {
		setup_flash_resource(flash_mmio, flash_map_base, cs,
		xlr_nor_res);
		pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res);
		return platform_device_register(&xlr_nor_dev);
		}
		return 0;
		}

		arch_initcall(xlr_flash_init);

Admin message