Merge tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Broadcom STB wake-up Timer

The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the

ability to wake up the system from low-power suspend/standby modes.

Required properties:

- compatible     : should contain "brcm,brcmstb-waketimer"

- reg            : the register start and length for the WKTMR block

- interrupts     : The TIMER interrupt

- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2

                    interrupt controller node

- clocks	 : The phandle to the UPG fixed clock (27Mhz domain)

Example:

waketimer@f0411580 {

	compatible = "brcm,brcmstb-waketimer";

	reg = <0xf0411580 0x14>;

	interrupts = <0x3>;

	interrupt-parent = <&aon_pm_l2_intc>;

	clocks = <&upg_fixed>;

};

* Cortina Systems Gemini RTC

Gemini SoC real-time clock.

Required properties:

- compatible : Should be "cortina,gemini-rtc"

Examples:

rtc@45000000 {

	compatible = "cortina,gemini-rtc";

	reg = <0x45000000 0x100>;

	interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;

};

* Faraday Technology FTRTC010 Real Time Clock

This RTC appears in for example the Storlink Gemini family of

SoCs.

Required properties:

- compatible : Should be one of:

  "faraday,ftrtc010"

  "cortina,gemini-rtc", "faraday,ftrtc010"

Optional properties:

- clocks: when present should contain clock references to the

  PCLK and EXTCLK clocks. Faraday calls the later CLK1HZ and

  says the clock should be 1 Hz, but implementers actually seem

  to choose different clocks here, like Cortina who chose

  32768 Hz (a typical low-power clock).

- clock-names: should name the clocks "PCLK" and "EXTCLK"

  respectively.

Examples:

rtc@45000000 {

	compatible = "cortina,gemini-rtc";

	reg = <0x45000000 0x100>;

	interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;

	clocks = <&foo 0>, <&foo 1>;

	clock-names = "PCLK", "EXTCLK";

};

STM32 Real Time Clock

Required properties:

- compatible: "st,stm32-rtc".

- compatible: can be either "st,stm32-rtc" or "st,stm32h7-rtc", depending on

  the device is compatible with stm32(f4/f7) or stm32h7.

- reg: address range of rtc register set.

- clocks: reference to the clock entry ck_rtc.

- clocks: can use up to two clocks, depending on part used:

  - "rtc_ck": RTC clock source.

    It is required on stm32(f4/f7) and stm32h7.

  - "pclk": RTC APB interface clock.

    It is not present on stm32(f4/f7).

    It is required on stm32h7.

- clock-names: must be "rtc_ck" and "pclk".

    It is required only on stm32h7.

- interrupt-parent: phandle for the interrupt controller.

- interrupts: rtc alarm interrupt.

- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain

  (RTC registers) write protection.

Optional properties (to override default ck_rtc parent clock):

- assigned-clocks: reference to the ck_rtc clock entry.

- assigned-clock-parents: phandle of the new parent clock of ck_rtc.

Optional properties (to override default rtc_ck parent clock):

- assigned-clocks: reference to the rtc_ck clock entry.

- assigned-clock-parents: phandle of the new parent clock of rtc_ck.

Example:

		interrupts = <17 1>;

		st,syscfg = <&pwrcfg>;

	};

	rtc: rtc@58004000 {

		compatible = "st,stm32h7-rtc";

		reg = <0x58004000 0x400>;

		clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;

		clock-names = "pclk", "rtc_ck";

		assigned-clocks = <&rcc RTC_CK>;

		assigned-clock-parents = <&rcc LSE_CK>;

		interrupt-parent = <&exti>;

		interrupts = <17 1>;

		interrupt-names = "alarm";

		st,syscfg = <&pwrcfg>;

		status = "disabled";

	};

=======================================

Real Time Clock (RTC) Drivers for Linux

=======================================

the system clock from the discrete RTC, but use the integrated one for all

other tasks, because of its greater functionality.

SYSFS INTERFACE

SYSFS interface

---------------

The sysfs interface under /sys/class/rtc/rtcN provides access to various

rtc attributes without requiring the use of ioctls. All dates and times

are in the RTC's timezone, rather than in system time.

date:  	   	 RTC-provided date

hctosys:   	 1 if the RTC provided the system time at boot via the

================ ==============================================================

date  	   	 RTC-provided date

hctosys   	 1 if the RTC provided the system time at boot via the

		 CONFIG_RTC_HCTOSYS kernel option, 0 otherwise

max_user_freq:	 The maximum interrupt rate an unprivileged user may request

max_user_freq	 The maximum interrupt rate an unprivileged user may request

		 from this RTC.

name:		 The name of the RTC corresponding to this sysfs directory

since_epoch:	 The number of seconds since the epoch according to the RTC

time:		 RTC-provided time

wakealarm:	 The time at which the clock will generate a system wakeup

name		 The name of the RTC corresponding to this sysfs directory

since_epoch	 The number of seconds since the epoch according to the RTC

time		 RTC-provided time

wakealarm	 The time at which the clock will generate a system wakeup

		 event. This is a one shot wakeup event, so must be reset

		 after wake if a daily wakeup is required. Format is seconds since

		 the epoch by default, or if there's a leading +, seconds in the

		 future, or if there is a leading +=, seconds ahead of the current

		 alarm.

offset:		 The amount which the rtc clock has been adjusted in firmware.

		 after wake if a daily wakeup is required. Format is seconds

		 since the epoch by default, or if there's a leading +, seconds

		 in the future, or if there is a leading +=, seconds ahead of

		 the current alarm.

offset		 The amount which the rtc clock has been adjusted in firmware.

		 Visible only if the driver supports clock offset adjustment.

		 The unit is parts per billion, i.e. The number of clock ticks

		 which are added to or removed from the rtc's base clock per

		 billion ticks. A positive value makes a day pass more slowly,

		 longer, and a negative value makes a day pass more quickly.

*/nvmem		 The non volatile storage exported as a raw file, as described

		 in Documentation/nvmem/nvmem.txt

================ ==============================================================

IOCTL INTERFACE

IOCTL interface

---------------

The ioctl() calls supported by /dev/rtc are also supported by the RTC class