Commit 39fb9930 authored by Jacopo Mondi's avatar Jacopo Mondi Committed by Mauro Carvalho Chehab
Browse files

media: arch: sh: ap325rxa: Use new renesas-ceu camera driver 



Use the new renesas-ceu camera driver in ap325rxa board file instead of
the soc_camera based sh_mobile_ceu_camera driver.

Get rid of soc_camera specific components, and register CEU0 with a single
video sensor (ov7725).

Memory for the CEU video buffers is now reserved with membocks APIs
and need to be declared as dma_coherent during machine initialization to
remove that architecture specific part from CEU driver.

The ap325rxa board file registers another camera (ncm03j) for which I found no
driver in mainline kernel version, and that was configured/probed by sending
i2c messages (of 'magic blobs) from the board file itself. I removed the
sensor registration from this new version as it used soc_camera components
that will be later removed.

While at there update license to SPDX header and sort headers alphabetically.

Compile tested only.

Signed-off-by: default avatarJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent 1a3c230b

arch/sh/boards/mach-ap325rxa/setup.c

+79 −203
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * Renesas - AP-325RXA

 * (Compatible with Algo System ., LTD. - AP-320A)

 *

 * Copyright (C) 2008 Renesas Solutions Corp.

 * Author : Yusuke Goda <goda.yuske@renesas.com>

 *

 * This file is subject to the terms and conditions of the GNU General Public

 * License.  See the file "COPYING" in the main directory of this archive

 * for more details.

 */



#include <linux/init.h>

#include <asm/clock.h>

#include <asm/io.h>

#include <asm/suspend.h>



#include <cpu/sh7723.h>



#include <linux/clkdev.h>

#include <linux/delay.h>

#include <linux/device.h>

#include <linux/gpio.h>

#include <linux/gpio/machine.h>

#include <linux/i2c.h>

#include <linux/init.h>

#include <linux/interrupt.h>

#include <linux/platform_device.h>

#include <linux/memblock.h>

#include <linux/mfd/tmio.h>

#include <linux/mmc/host.h>

#include <linux/mtd/physmap.h>

#include <linux/mtd/sh_flctl.h>

#include <linux/mfd/tmio.h>

#include <linux/delay.h>

#include <linux/i2c.h>

#include <linux/platform_device.h>

#include <linux/regulator/fixed.h>

#include <linux/regulator/machine.h>

#include <linux/sh_intc.h>

#include <linux/smsc911x.h>

#include <linux/gpio.h>

#include <linux/videodev2.h>

#include <linux/sh_intc.h>



#include <media/drv-intf/renesas-ceu.h>

#include <media/i2c/ov772x.h>

#include <media/soc_camera.h>

#include <linux/platform_data/media/soc_camera_platform.h>

#include <media/drv-intf/sh_mobile_ceu.h>



#include <video/sh_mobile_lcdc.h>

#include <asm/io.h>

#include <asm/clock.h>

#include <asm/suspend.h>

#include <cpu/sh7723.h>



#define CEU_BUFFER_MEMORY_SIZE		(4 << 20)

static phys_addr_t ceu_dma_membase;



/* Dummy supplies, where voltage doesn't matter */

static struct regulator_consumer_supply dummy_supplies[] = {
@@ -253,150 +258,25 @@ static struct platform_device lcdc_device = { 
	},

};



static void camera_power(int val)

{

	gpio_set_value(GPIO_PTZ5, val); /* RST_CAM/RSTB */

	mdelay(10);

}



#ifdef CONFIG_I2C

/* support for the old ncm03j camera */

static unsigned char camera_ncm03j_magic[] =

{

	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,

	0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,

	0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,

	0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,

	0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,

	0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,

	0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,

	0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,

	0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,

	0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,

	0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,

	0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,

	0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,

	0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,

	0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,

	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,

};



static int camera_probe(void)

{

	struct i2c_adapter *a = i2c_get_adapter(0);

	struct i2c_msg msg;

	int ret;



	if (!a)

		return -ENODEV;



	camera_power(1);

	msg.addr = 0x6e;

	msg.buf = camera_ncm03j_magic;

	msg.len = 2;

	msg.flags = 0;

	ret = i2c_transfer(a, &msg, 1);

	camera_power(0);



	return ret;

}



static int camera_set_capture(struct soc_camera_platform_info *info,

			      int enable)

{

	struct i2c_adapter *a = i2c_get_adapter(0);

	struct i2c_msg msg;

	int ret = 0;

	int i;



	camera_power(0);

	if (!enable)

		return 0; /* no disable for now */



	camera_power(1);

	for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {

		u_int8_t buf[8];



		msg.addr = 0x6e;

		msg.buf = buf;

		msg.len = 2;

		msg.flags = 0;



		buf[0] = camera_ncm03j_magic[i];

		buf[1] = camera_ncm03j_magic[i + 1];



		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);

	}



	return ret;

}



static int ap325rxa_camera_add(struct soc_camera_device *icd);

static void ap325rxa_camera_del(struct soc_camera_device *icd);



static struct soc_camera_platform_info camera_info = {

	.format_name = "UYVY",

	.format_depth = 16,

	.format = {

		.code = MEDIA_BUS_FMT_UYVY8_2X8,

		.colorspace = V4L2_COLORSPACE_SMPTE170M,

		.field = V4L2_FIELD_NONE,

		.width = 640,

		.height = 480,

/* Powerdown/reset gpios for CEU image sensors */

static struct gpiod_lookup_table ov7725_gpios = {

	.dev_id		= "0-0021",

	.table		= {

		GPIO_LOOKUP("sh7723_pfc", GPIO_PTZ5, "reset", GPIO_ACTIVE_LOW),

	},

	.mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |

	V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |

	V4L2_MBUS_DATA_ACTIVE_HIGH,

	.mbus_type = V4L2_MBUS_PARALLEL,

	.set_capture = camera_set_capture,

};



static struct soc_camera_link camera_link = {

	.bus_id		= 0,

	.add_device	= ap325rxa_camera_add,

	.del_device	= ap325rxa_camera_del,

	.module_name	= "soc_camera_platform",

	.priv		= &camera_info,

};



static struct platform_device *camera_device;



static void ap325rxa_camera_release(struct device *dev)

{

	soc_camera_platform_release(&camera_device);

}



static int ap325rxa_camera_add(struct soc_camera_device *icd)

{

	int ret = soc_camera_platform_add(icd, &camera_device, &camera_link,

					  ap325rxa_camera_release, 0);

	if (ret < 0)

		return ret;



	ret = camera_probe();

	if (ret < 0)

		soc_camera_platform_del(icd, camera_device, &camera_link);



	return ret;

}



static void ap325rxa_camera_del(struct soc_camera_device *icd)

{

	soc_camera_platform_del(icd, camera_device, &camera_link);

}

#endif /* CONFIG_I2C */



static int ov7725_power(struct device *dev, int mode)

{

	camera_power(0);

	if (mode)

		camera_power(1);



	return 0;

}



static struct sh_mobile_ceu_info sh_mobile_ceu_info = {

	.flags = SH_CEU_FLAG_USE_8BIT_BUS,

static struct ceu_platform_data ceu0_pdata = {

	.num_subdevs			= 1,

	.subdevs = {

		{ /* [0] = ov7725  */

			.flags		= 0,

			.bus_width	= 8,

			.bus_shift	= 0,

			.i2c_adapter_id	= 0,

			.i2c_address	= 0x21,

		},

	},

};



static struct resource ceu_resources[] = {
@@ -410,18 +290,15 @@ static struct resource ceu_resources[] = { 
		.start  = evt2irq(0x880),

		.flags  = IORESOURCE_IRQ,

	},

	[2] = {

		/* place holder for contiguous memory */

	},

};



static struct platform_device ceu_device = {

	.name		= "sh_mobile_ceu",

	.id             = 0, /* "ceu0" clock */

static struct platform_device ap325rxa_ceu_device = {

	.name		= "renesas-ceu",

	.id             = 0, /* "ceu.0" clock */

	.num_resources	= ARRAY_SIZE(ceu_resources),

	.resource	= ceu_resources,

	.dev		= {

		.platform_data	= &sh_mobile_ceu_info,

		.platform_data	= &ceu0_pdata,

	},

};
@@ -488,44 +365,18 @@ static struct platform_device sdhi1_cn7_device = { 
	},

};



static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {

	{

		I2C_BOARD_INFO("pcf8563", 0x51),

	},

};



static struct i2c_board_info ap325rxa_i2c_camera[] = {

	{

		I2C_BOARD_INFO("ov772x", 0x21),

	},

};



static struct ov772x_camera_info ov7725_info = {

	.flags		= OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,

	.edgectrl	= OV772X_AUTO_EDGECTRL(0xf, 0),

};



static struct soc_camera_link ov7725_link = {

	.bus_id		= 0,

	.power		= ov7725_power,

	.board_info	= &ap325rxa_i2c_camera[0],

	.i2c_adapter_id	= 0,

	.priv		= &ov7725_info,

};



static struct platform_device ap325rxa_camera[] = {

static struct i2c_board_info ap325rxa_i2c_devices[] __initdata = {

	{

		.name	= "soc-camera-pdrv",

		.id	= 0,

		.dev	= {

			.platform_data = &ov7725_link,

		},

	}, {

		.name	= "soc-camera-pdrv",

		.id	= 1,

		.dev	= {

			.platform_data = &camera_link,

		I2C_BOARD_INFO("pcf8563", 0x51),

	},

	{

		I2C_BOARD_INFO("ov772x", 0x21),

		.platform_data = &ov7725_info,

	},

};
@@ -533,12 +384,9 @@ static struct platform_device *ap325rxa_devices[] __initdata = { 
	&smsc9118_device,

	&ap325rxa_nor_flash_device,

	&lcdc_device,

	&ceu_device,

	&nand_flash_device,

	&sdhi0_cn3_device,

	&sdhi1_cn7_device,

	&ap325rxa_camera[0],

	&ap325rxa_camera[1],

};



extern char ap325rxa_sdram_enter_start;
@@ -649,8 +497,6 @@ static int __init ap325rxa_devices_setup(void) 
	__raw_writew(0xFFFF, PORT_DRVCRA);

	__raw_writew(0xFFFF, PORT_DRVCRB);



	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);



	/* SDHI0 - CN3 - SD CARD */

	gpio_request(GPIO_FN_SDHI0CD_PTD, NULL);

	gpio_request(GPIO_FN_SDHI0WP_PTD, NULL);
@@ -670,9 +516,25 @@ static int __init ap325rxa_devices_setup(void) 
	gpio_request(GPIO_FN_SDHI1CMD, NULL);

	gpio_request(GPIO_FN_SDHI1CLK, NULL);



	/* Add a clock alias for ov7725 xclk source. */

	clk_add_alias(NULL, "0-0021", "video_clk", NULL);



	/* Register RSTB gpio for ov7725 camera sensor. */

	gpiod_add_lookup_table(&ov7725_gpios);



	i2c_register_board_info(0, ap325rxa_i2c_devices,

				ARRAY_SIZE(ap325rxa_i2c_devices));



	/* Initialize CEU platform device separately to map memory first */

	device_initialize(&ap325rxa_ceu_device.dev);

	arch_setup_pdev_archdata(&ap325rxa_ceu_device);

	dma_declare_coherent_memory(&ap325rxa_ceu_device.dev,

				    ceu_dma_membase, ceu_dma_membase,

				    ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1,

				    DMA_MEMORY_EXCLUSIVE);



	platform_device_add(&ap325rxa_ceu_device);



	return platform_add_devices(ap325rxa_devices,

				ARRAY_SIZE(ap325rxa_devices));

}
@@ -689,7 +551,21 @@ static int ap325rxa_mode_pins(void) 
	return MODE_PIN5 | MODE_PIN8;

}



/* Reserve a portion of memory for CEU buffers */

static void __init ap325rxa_mv_mem_reserve(void)

{

	phys_addr_t phys;

	phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;



	phys = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_ALLOC_ANYWHERE);

	memblock_free(phys, size);

	memblock_remove(phys, size);



	ceu_dma_membase = phys;

}



static struct sh_machine_vector mv_ap325rxa __initmv = {

	.mv_name = "AP-325RXA",

	.mv_mode_pins = ap325rxa_mode_pins,

	.mv_mem_reserve	= ap325rxa_mv_mem_reserve,

};

arch/sh/kernel/cpu/sh4a/clock-sh7723.c

+1 −1
Original line number Diff line number Diff line
@@ -260,7 +260,7 @@ static struct clk_lookup lookups[] = { 
	CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU2H1]),

	CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),

	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),

	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[HWBLK_CEU]),

	CLKDEV_DEV_ID("ceu.0", &mstp_clks[HWBLK_CEU]),

	CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU2H0]),

	CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),

CRA Git | Maintained and supported by SUSTech CRA and CCSE