Commit 3988a4df authored by Johan Bjornstedt's avatar Johan Bjornstedt Committed by Anton Vorontsov
Browse files

ab8500_bm: Skip first CCEOC irq for instant current 



When enabling the CCEOC irq we might get false interrupt
from ab8500-driver due to the latched value will be saved
and interpreted as an IRQ when enabled

Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarJohan Bjornstedt <johan.bjornstedt@stericsson.com>
Signed-off-by: default avatarHenrik Solver <henrik.solver@stericsson.com>
Reviewed-by: default avatarKarl KOMIEROWSKI <karl.komierowski@stericsson.com>
Signed-off-by: default avatarAnton Vorontsov <anton@enomsg.org>
parent defbfa9c

drivers/power/ab8500_btemp.c

+4 −7
Original line number Diff line number Diff line
@@ -374,13 +374,10 @@ static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di) 
		return ret;

	}



	/*

	 * Since there is no interrupt when current measurement is done,

	 * loop for over 250ms (250ms is one sample conversion time

	 * with 32.768 Khz RTC clock). Note that a stop time must be set

	 * since the ab8500_btemp_read_batctrl_voltage call can block and

	 * take an unknown amount of time to complete.

	 */

	do {

		msleep(20);

	} while (!ab8500_fg_inst_curr_started(di->fg));



	i = 0;



	do {

drivers/power/ab8500_fg.c

+55 −8
Original line number Diff line number Diff line
@@ -160,6 +160,7 @@ struct inst_curr_result_list { 
 * @recovery_cnt:	Counter for recovery mode

 * @high_curr_cnt:	Counter for high current mode

 * @init_cnt:		Counter for init mode

 * @nbr_cceoc_irq_cnt	Counter for number of CCEOC irqs received since enabled

 * @recovery_needed:	Indicate if recovery is needed

 * @high_curr_mode:	Indicate if we're in high current mode

 * @init_capacity:	Indicate if initial capacity measuring should be done
@@ -167,6 +168,7 @@ struct inst_curr_result_list { 
 * @calib_state		State during offset calibration

 * @discharge_state:	Current discharge state

 * @charge_state:	Current charge state

 * @ab8500_fg_started	Completion struct used for the instant current start

 * @ab8500_fg_complete	Completion struct used for the instant current reading

 * @flags:		Structure for information about events triggered

 * @bat_cap:		Structure for battery capacity specific parameters
@@ -199,6 +201,7 @@ struct ab8500_fg { 
	int recovery_cnt;

	int high_curr_cnt;

	int init_cnt;

	int nbr_cceoc_irq_cnt;

	bool recovery_needed;

	bool high_curr_mode;

	bool init_capacity;
@@ -206,6 +209,7 @@ struct ab8500_fg { 
	enum ab8500_fg_calibration_state calib_state;

	enum ab8500_fg_discharge_state discharge_state;

	enum ab8500_fg_charge_state charge_state;

	struct completion ab8500_fg_started;

	struct completion ab8500_fg_complete;

	struct ab8500_fg_flags flags;

	struct ab8500_fg_battery_capacity bat_cap;
@@ -531,6 +535,7 @@ cc_err: 


	mutex_lock(&di->cc_lock);



	di->nbr_cceoc_irq_cnt = 0;

	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,

		AB8500_RTC_CC_CONF_REG, &reg_val);

	if (ret < 0)
@@ -558,6 +563,7 @@ cc_err: 
	}



	/* Return and WFI */

	INIT_COMPLETION(di->ab8500_fg_started);

	INIT_COMPLETION(di->ab8500_fg_complete);

	enable_irq(di->irq);
@@ -568,6 +574,17 @@ fail: 
	return ret;

}



/**

 * ab8500_fg_inst_curr_started() - check if fg conversion has started

 * @di:         pointer to the ab8500_fg structure

 *

 * Returns 1 if conversion started, 0 if still waiting

 */

int ab8500_fg_inst_curr_started(struct ab8500_fg *di)

{

	return completion_done(&di->ab8500_fg_started);

}



/**

 * ab8500_fg_inst_curr_done() - check if fg conversion is done

 * @di:         pointer to the ab8500_fg structure
@@ -596,13 +613,15 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) 
	int timeout;



	if (!completion_done(&di->ab8500_fg_complete)) {

		timeout = wait_for_completion_timeout(&di->ab8500_fg_complete,

		timeout = wait_for_completion_timeout(

			&di->ab8500_fg_complete,

			INS_CURR_TIMEOUT);

		dev_dbg(di->dev, "Finalize time: %d ms\n",

			((INS_CURR_TIMEOUT - timeout) * 1000) / HZ);

		if (!timeout) {

			ret = -ETIME;

			disable_irq(di->irq);

			di->nbr_cceoc_irq_cnt = 0;

			dev_err(di->dev, "completion timed out [%d]\n",

				__LINE__);

			goto fail;
@@ -610,6 +629,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) 
	}



	disable_irq(di->irq);

	di->nbr_cceoc_irq_cnt = 0;



	ret = abx500_mask_and_set_register_interruptible(di->dev,

			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
@@ -684,6 +704,7 @@ fail: 
int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di)

{

	int ret;

	int timeout;

	int res = 0;



	ret = ab8500_fg_inst_curr_start(di);
@@ -692,13 +713,32 @@ int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di) 
		return 0;

	}



	/* Wait for CC to actually start */

	if (!completion_done(&di->ab8500_fg_started)) {

		timeout = wait_for_completion_timeout(

			&di->ab8500_fg_started,

			INS_CURR_TIMEOUT);

		dev_dbg(di->dev, "Start time: %d ms\n",

			((INS_CURR_TIMEOUT - timeout) * 1000) / HZ);

		if (!timeout) {

			ret = -ETIME;

			dev_err(di->dev, "completion timed out [%d]\n",

				__LINE__);

			goto fail;

		}

	}



	ret = ab8500_fg_inst_curr_finalize(di, &res);

	if (ret) {

		dev_err(di->dev, "Failed to finalize fg_inst\n");

		return 0;

	}



	dev_dbg(di->dev, "%s instant current: %d", __func__, res);

	return res;

fail:

	mutex_unlock(&di->cc_lock);

	return ret;

}



/**
@@ -1523,8 +1563,6 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) 


	case AB8500_FG_DISCHARGE_WAKEUP:

		ab8500_fg_coulomb_counter(di, true);

		di->inst_curr = ab8500_fg_inst_curr_blocking(di);



		ab8500_fg_calc_cap_discharge_voltage(di, true);



		di->fg_samples = SEC_TO_SAMPLE(
@@ -1641,8 +1679,6 @@ static void ab8500_fg_periodic_work(struct work_struct *work) 
		fg_periodic_work.work);



	if (di->init_capacity) {

		/* A dummy read that will return 0 */

		di->inst_curr = ab8500_fg_inst_curr_blocking(di);

		/* Get an initial capacity calculation */

		ab8500_fg_calc_cap_discharge_voltage(di, true);

		ab8500_fg_check_capacity_limits(di, true);
@@ -1828,7 +1864,13 @@ static void ab8500_fg_instant_work(struct work_struct *work) 
static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di)

{

	struct ab8500_fg *di = _di;

	if (!di->nbr_cceoc_irq_cnt) {

		di->nbr_cceoc_irq_cnt++;

		complete(&di->ab8500_fg_started);

	} else {

		di->nbr_cceoc_irq_cnt = 0;

		complete(&di->ab8500_fg_complete);

	}

	return IRQ_HANDLED;

}
@@ -2551,7 +2593,11 @@ static int ab8500_fg_probe(struct platform_device *pdev) 
	di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);

	ab8500_fg_coulomb_counter(di, true);



	/* Initialize completion used to notify completion of inst current */

	/*

	 * Initialize completion used to notify completion and start

	 * of inst current

	 */

	init_completion(&di->ab8500_fg_started);

	init_completion(&di->ab8500_fg_complete);



	/* Register interrupts */
@@ -2571,6 +2617,7 @@ static int ab8500_fg_probe(struct platform_device *pdev) 
	}

	di->irq = platform_get_irq_byname(pdev, "CCEOC");

	disable_irq(di->irq);

	di->nbr_cceoc_irq_cnt = 0;



	platform_set_drvdata(pdev, di);

include/linux/mfd/abx500/ab8500-bm.h

+7 −0
Original line number Diff line number Diff line
@@ -431,11 +431,18 @@ struct ab8500_fg *ab8500_fg_get(void); 
int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);

int ab8500_fg_inst_curr_start(struct ab8500_fg *di);

int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res);

int ab8500_fg_inst_curr_started(struct ab8500_fg *di);

int ab8500_fg_inst_curr_done(struct ab8500_fg *di);



#else

int ab8500_fg_inst_curr_started(struct ab8500_fg *di)

{

	return 0;

}



int ab8500_fg_inst_curr_done(struct ab8500_fg *di)

{

	return 0;

}

static void ab8500_fg_reinit(void)

{

CRA Git | Maintained and supported by SUSTech CRA and CCSE