ARM: dts: Configure sgx for omap5 (394534cb) · Commits · 戴 / test

I've tested that the interconnect target module enables and idles just fine when probed with ti-sysc with PM runtime control via sys: # echo on > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe00 # OCP Revision 0x5600fe00 = 0x40000000 # echo auto > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe10 # rwmem 0x56000024 Cc: Adam Ford <aford173@gmail.com> Cc: Filip Matijević <filip.matijevic.pz@gmail.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: moaz korena <moaz@korena.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Philipp Rossak <embed3d@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:

Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/omap5.dtsi

+23 −0

Original line number	Diff line number	Diff line
		@@ -257,6 +257,29 @@
		ports-implemented = <0x1>;
		};

		target-module@56000000 {
		compatible = "ti,sysc-omap4", "ti,sysc";
		reg = <0x5600fe00 0x4>,
		<0x5600fe10 0x4>;
		reg-names = "rev", "sysc";
		ti,sysc-midle = <SYSC_IDLE_FORCE>,
		<SYSC_IDLE_NO>,
		<SYSC_IDLE_SMART>;
		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
		<SYSC_IDLE_NO>,
		<SYSC_IDLE_SMART>;
		clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>;
		clock-names = "fck";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0x56000000 0x2000000>;

		/*
		* Closed source PowerVR driver, no child device
		* binding or driver in mainline
		*/
		};

		dss: dss@58000000 {
		compatible = "ti,omap5-dss";
		reg = <0x58000000 0x80>;

arch/arm/boot/dts/omap54xx-clocks.dtsi

+14 −0

Original line number	Diff line number	Diff line
		@@ -1146,6 +1146,20 @@
		};
		};

		gpu_cm: clock-controller@1500 {
		compatible = "ti,omap4-cm";
		reg = <0x1500 0x100>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0x1500 0x100>;

		gpu_clkctrl: clk@20 {
		compatible = "ti,clkctrl";
		reg = <0x20 0x4>;
		#clock-cells = <2>;
		};
		};

		l3init_cm: l3init_cm@1600 {
		compatible = "ti,omap4-cm";
		reg = <0x1600 0x100>;

Admin message