Commit 37ebb549 authored by Petr Mladek's avatar Petr Mladek Committed by Greg Kroah-Hartman
Browse files

usb: hub: rename khubd to hub_wq in documentation and comments 



USB hub has started to use a workqueue instead of kthread. Let's update
the documentation and comments here and there.

This patch mostly just replaces "khubd" with "hub_wq". There are only few
exceptions where the whole sentence was updated. These more complicated
changes can be found in the following files:

	   Documentation/usb/hotplug.txt
	   drivers/net/usb/usbnet.c
	   drivers/usb/core/hcd.c
	   drivers/usb/host/ohci-hcd.c
	   drivers/usb/host/xhci.c

Signed-off-by: default avatarPetr Mladek <pmladek@suse.cz>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 59d48b3f

Documentation/DocBook/usb.tmpl

+1 −1
Original line number Diff line number Diff line
@@ -593,7 +593,7 @@ for (;;) { 
	    Each device has one control endpoint (endpoint zero)

	    which supports a limited RPC style RPC access.

	    Devices are configured

	    by khubd (in the kernel) setting a device-wide

	    by hub_wq (in the kernel) setting a device-wide

	    <emphasis>configuration</emphasis> that affects things

	    like power consumption and basic functionality.

	    The endpoints are part of USB <emphasis>interfaces</emphasis>,

Documentation/usb/WUSB-Design-overview.txt

+3 −3
Original line number Diff line number Diff line
@@ -308,7 +308,7 @@ HC picks the /DN_Connect/ out (nep module sends to notif.c for delivery 
into /devconnect/). This process starts the authentication process for

the device. First we allocate a /fake port/ and assign an

unauthenticated address (128 to 255--what we really do is

0x80 | fake_port_idx). We fiddle with the fake port status and /khubd/

0x80 | fake_port_idx). We fiddle with the fake port status and /hub_wq/

sees a new connection, so he moves on to enable the fake port with a reset.



So now we are in the reset path -- we know we have a non-yet enumerated
@@ -317,7 +317,7 @@ device with an unauthorized address; we ask user space to authenticate 
exchange (FIXME: not yet done) and issue a /set address 0/ to bring the

device to the default state. Device is authenticated.



From here, the USB stack takes control through the usb_hcd ops. khubd

From here, the USB stack takes control through the usb_hcd ops. hub_wq

has seen the port status changes, as we have been toggling them. It will

start enumerating and doing transfers through usb_hcd->urb_enqueue() to

read descriptors and move our data.
@@ -331,7 +331,7 @@ Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this 
arrives to us as a notification through

devconnect.c:wusb_handle_dn_alive(). If a device times out, we

disconnect it from the system (cleaning up internal information and

toggling the bits in the fake hub port, which kicks khubd into removing

toggling the bits in the fake hub port, which kicks hub_wq into removing

the rest of the stuff).



This is done through devconnect:__wusb_check_devs(), which will scan the

Documentation/usb/hotplug.txt

+1 −1
Original line number Diff line number Diff line
@@ -58,7 +58,7 @@ USB POLICY AGENT 


The USB subsystem currently invokes /sbin/hotplug when USB devices

are added or removed from system.  The invocation is done by the kernel

hub daemon thread [khubd], or else as part of root hub initialization

hub workqueue [hub_wq], or else as part of root hub initialization

(done by init, modprobe, kapmd, etc).  Its single command line parameter

is the string "usb", and it passes these environment variables:

drivers/net/usb/usbnet.c

+8 −6
Original line number Diff line number Diff line
@@ -69,8 +69,9 @@ 
// reawaken network queue this soon after stopping; else watchdog barks

#define TX_TIMEOUT_JIFFIES	(5*HZ)



// throttle rx/tx briefly after some faults, so khubd might disconnect()

// us (it polls at HZ/4 usually) before we report too many false errors.

/* throttle rx/tx briefly after some faults, so hub_wq might disconnect()

 * us (it polls at HZ/4 usually) before we report too many false errors.

 */

#define THROTTLE_JIFFIES	(HZ/8)



// between wakeups
@@ -595,9 +596,9 @@ static void rx_complete (struct urb *urb) 
			  "rx shutdown, code %d\n", urb_status);

		goto block;



	/* we get controller i/o faults during khubd disconnect() delays.

	/* we get controller i/o faults during hub_wq disconnect() delays.

	 * throttle down resubmits, to avoid log floods; just temporarily,

	 * so we still recover when the fault isn't a khubd delay.

	 * so we still recover when the fault isn't a hub_wq delay.

	 */

	case -EPROTO:

	case -ETIME:
@@ -1185,8 +1186,9 @@ static void tx_complete (struct urb *urb) 
		case -ESHUTDOWN:		// hardware gone

			break;



		// like rx, tx gets controller i/o faults during khubd delays

		// and so it uses the same throttling mechanism.

		/* like rx, tx gets controller i/o faults during hub_wq

		 * delays and so it uses the same throttling mechanism.

		 */

		case -EPROTO:

		case -ETIME:

		case -EILSEQ:

drivers/usb/README

+1 −1
Original line number Diff line number Diff line
@@ -24,7 +24,7 @@ Here is a list of what each subdirectory here is, and what is contained in 
them.



core/		- This is for the core USB host code, including the

		  usbfs files and the hub class driver ("khubd").

		  usbfs files and the hub class driver ("hub_wq").



host/		- This is for USB host controller drivers.  This

		  includes UHCI, OHCI, EHCI, and others that might

CRA Git | Maintained and supported by SUSTech CRA and CCSE