Merge tag 'for-5.7-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-tegra (37a94882) · Commits · 戴 / test

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt

deleted100644 → 0

+0 −300

Original line number	Diff line number	Diff line
		NVIDIA Tegra Power Management Controller (PMC)

		== Power Management Controller Node ==

		The PMC block interacts with an external Power Management Unit. The PMC
		mostly controls the entry and exit of the system from different sleep
		modes. It provides power-gating controllers for SoC and CPU power-islands.

		Required properties:
		- name : Should be pmc
		- compatible : Should contain one of the following:
		For Tegra20 must contain "nvidia,tegra20-pmc".
		For Tegra30 must contain "nvidia,tegra30-pmc".
		For Tegra114 must contain "nvidia,tegra114-pmc"
		For Tegra124 must contain "nvidia,tegra124-pmc"
		For Tegra132 must contain "nvidia,tegra124-pmc"
		For Tegra210 must contain "nvidia,tegra210-pmc"
		- reg : Offset and length of the register set for the device
		- clocks : Must contain an entry for each entry in clock-names.
		See ../clocks/clock-bindings.txt for details.
		- clock-names : Must include the following entries:
		"pclk" (The Tegra clock of that name),
		"clk32k_in" (The 32KHz clock input to Tegra).

		Optional properties:
		- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
		The PMU is an external Power Management Unit, whose interrupt output
		signal is fed into the PMC. This signal is optionally inverted, and then
		fed into the ARM GIC. The PMC is not involved in the detection or
		handling of this interrupt signal, merely its inversion.
		- nvidia,suspend-mode : The suspend mode that the platform should use.
		Valid values are 0, 1 and 2:
		0 (LP0): CPU + Core voltage off and DRAM in self-refresh
		1 (LP1): CPU voltage off and DRAM in self-refresh
		2 (LP2): CPU voltage off
		- nvidia,core-power-req-active-high : Boolean, core power request active-high
		- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
		- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
		- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
		is enabled.

		Required properties when nvidia,suspend-mode is specified:
		- nvidia,cpu-pwr-good-time : CPU power good time in uS.
		- nvidia,cpu-pwr-off-time : CPU power off time in uS.
		- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
		Core power good time in uS.
		- nvidia,core-pwr-off-time : Core power off time in uS.

		Required properties when nvidia,suspend-mode=<0>:
		- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
		The LP0 vector contains the warm boot code that is executed by AVP when
		resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
		processor and always being the first boot processor when chip is power on
		or resume from deep sleep mode. When the system is resumed from the deep
		sleep mode, the warm boot code will restore some PLLs, clocks and then
		bring up CPU0 for resuming the system.

		Hardware-triggered thermal reset:
		On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists,
		hardware-triggered thermal reset will be enabled.

		Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
		- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are
		described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the
		Tegra K1 Technical Reference Manual.
		- nvidia,bus-addr : Bus address of the PMU on the I2C bus
		- nvidia,reg-addr : I2C register address to write poweroff command to
		- nvidia,reg-data : Poweroff command to write to PMU

		Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
		- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command.
		Defaults to 0. Valid values are described in section 12.5.2
		"Pinmux Support" of the Tegra4 Technical Reference Manual.

		Optional nodes:
		- powergates : This node contains a hierarchy of power domain nodes, which
		should match the powergates on the Tegra SoC. See "Powergate
		Nodes" below.

		Example:

		/ SoC dts including file
		pmc@7000f400 {
		compatible = "nvidia,tegra20-pmc";
		reg = <0x7000e400 0x400>;
		clocks = <&tegra_car 110>, <&clk32k_in>;
		clock-names = "pclk", "clk32k_in";
		nvidia,invert-interrupt;
		nvidia,suspend-mode = <1>;
		nvidia,cpu-pwr-good-time = <2000>;
		nvidia,cpu-pwr-off-time = <100>;
		nvidia,core-pwr-good-time = <3845 3845>;
		nvidia,core-pwr-off-time = <458>;
		nvidia,core-power-req-active-high;
		nvidia,sys-clock-req-active-high;
		nvidia,lp0-vec = <0xbdffd000 0x2000>;
		};

		/ Tegra board dts file
		{
		...
		pmc@7000f400 {
		i2c-thermtrip {
		nvidia,i2c-controller-id = <4>;
		nvidia,bus-addr = <0x40>;
		nvidia,reg-addr = <0x36>;
		nvidia,reg-data = <0x2>;
		};
		};
		...
		clocks {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		clk32k_in: clock {
		compatible = "fixed-clock";
		reg=<0>;
		#clock-cells = <0>;
		clock-frequency = <32768>;
		};
		};
		...
		};


		== Powergate Nodes ==

		Each of the powergate nodes represents a power-domain on the Tegra SoC
		that can be power-gated by the Tegra PMC. The name of the powergate node
		should be one of the below. Note that not every powergate is applicable
		to all Tegra devices and the following list shows which powergates are
		applicable to which devices. Please refer to the Tegra TRM for more
		details on the various powergates.

		Name Description Devices Applicable
		3d 3D Graphics Tegra20/114/124/210
		3d0 3D Graphics 0 Tegra30
		3d1 3D Graphics 1 Tegra30
		aud Audio Tegra210
		dfd Debug Tegra210
		dis Display A Tegra114/124/210
		disb Display B Tegra114/124/210
		heg 2D Graphics Tegra30/114/124/210
		iram Internal RAM Tegra124/210
		mpe MPEG Encode All
		nvdec NVIDIA Video Decode Engine Tegra210
		nvjpg NVIDIA JPEG Engine Tegra210
		pcie PCIE Tegra20/30/124/210
		sata SATA Tegra30/124/210
		sor Display interfaces Tegra124/210
		ve2 Video Encode Engine 2 Tegra210
		venc Video Encode Engine All
		vdec Video Decode Engine Tegra20/30/114/124
		vic Video Imaging Compositor Tegra124/210
		xusba USB Partition A Tegra114/124/210
		xusbb USB Partition B Tegra114/124/210
		xusbc USB Partition C Tegra114/124/210

		Required properties:
		- clocks: Must contain an entry for each clock required by the PMC for
		controlling a power-gate. See ../clocks/clock-bindings.txt for details.
		- resets: Must contain an entry for each reset required by the PMC for
		controlling a power-gate. See ../reset/reset.txt for details.
		- #power-domain-cells: Must be 0.

		Example:

		pmc: pmc@7000e400 {
		compatible = "nvidia,tegra210-pmc";
		reg = <0x0 0x7000e400 0x0 0x400>;
		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
		clock-names = "pclk", "clk32k_in";

		powergates {
		pd_audio: aud {
		clocks = <&tegra_car TEGRA210_CLK_APE>,
		<&tegra_car TEGRA210_CLK_APB2APE>;
		resets = <&tegra_car 198>;
		#power-domain-cells = <0>;
		};
		};
		};


		== Powergate Clients ==

		Hardware blocks belonging to a power domain should contain a "power-domains"
		property that is a phandle pointing to the corresponding powergate node.

		Example:

		adma: adma@702e2000 {
		...
		power-domains = <&pd_audio>;
		...
		};

		== Pad Control ==

		On Tegra SoCs a pad is a set of pins which are configured as a group.
		The pin grouping is a fixed attribute of the hardware. The PMC can be
		used to set pad power state and signaling voltage. A pad can be either
		in active or power down mode. The support for power state and signaling
		voltage configuration varies depending on the pad in question. 3.3 V and
		1.8 V signaling voltages are supported on pins where software
		controllable signaling voltage switching is available.

		The pad configuration state nodes are placed under the pmc node and they
		are referred to by the pinctrl client properties. For more information
		see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
		The pad name should be used as the value of the pins property in pin
		configuration nodes.

		The following pads are present on Tegra124 and Tegra132:
		audio bb cam comp
		csia csb cse dsi
		dsib dsic dsid hdmi
		hsic hv lvds mipi-bias
		nand pex-bias pex-clk1 pex-clk2
		pex-cntrl sdmmc1 sdmmc3 sdmmc4
		sys_ddc uart usb0 usb1
		usb2 usb_bias

		The following pads are present on Tegra210:
		audio audio-hv cam csia
		csib csic csid csie
		csif dbg debug-nonao dmic
		dp dsi dsib dsic
		dsid emmc emmc2 gpio
		hdmi hsic lvds mipi-bias
		pex-bias pex-clk1 pex-clk2 pex-cntrl
		sdmmc1 sdmmc3 spi spi-hv
		uart usb0 usb1 usb2
		usb3 usb-bias

		Required pin configuration properties:
		- pins: Must contain name of the pad(s) to be configured.

		Optional pin configuration properties:
		- low-power-enable: Configure the pad into power down mode
		- low-power-disable: Configure the pad into active mode
		- power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8
		or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
		The values are defined in
		include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.

		Note: The power state can be configured on all of the Tegra124 and
		Tegra132 pads. None of the Tegra124 or Tegra132 pads support
		signaling voltage switching.

		Note: All of the listed Tegra210 pads except pex-cntrl support power
		state configuration. Signaling voltage switching is supported on
		following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio,
		pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.

		Pad configuration state example:
		pmc: pmc@7000e400 {
		compatible = "nvidia,tegra210-pmc";
		reg = <0x0 0x7000e400 0x0 0x400>;
		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
		clock-names = "pclk", "clk32k_in";

		...

		sdmmc1_3v3: sdmmc1-3v3 {
		pins = "sdmmc1";
		power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
		};

		sdmmc1_1v8: sdmmc1-1v8 {
		pins = "sdmmc1";
		power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
		};

		hdmi_off: hdmi-off {
		pins = "hdmi";
		low-power-enable;
		}

		hdmi_on: hdmi-on {
		pins = "hdmi";
		low-power-disable;
		}
		};

		Pinctrl client example:
		sdmmc1: sdhci@700b0000 {
		...
		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
		pinctrl-0 = <&sdmmc1_3v3>;
		pinctrl-1 = <&sdmmc1_1v8>;
		};
		...
		sor@54540000 {
		...
		pinctrl-0 = <&hdmi_off>;
		pinctrl-1 = <&hdmi_on>;
		pinctrl-names = "hdmi-on", "hdmi-off";
		};

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml

0 → 100644

+354 −0

Original line number	Diff line number	Diff line
		# SPDX-License-Identifier: GPL-2.0
		%YAML 1.2
		---
		$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml#
		$schema: http://devicetree.org/meta-schemas/core.yaml#

		title: Tegra Power Management Controller (PMC)

		maintainers:
		- Thierry Reding <thierry.reding@gmail.com>
		- Jonathan Hunter <jonathanh@nvidia.com>

		properties:
		compatible:
		enum:
		- nvidia,tegra20-pmc
		- nvidia,tegra20-pmc
		- nvidia,tegra30-pmc
		- nvidia,tegra114-pmc
		- nvidia,tegra124-pmc
		- nvidia,tegra210-pmc

		reg:
		maxItems: 1
		description:
		Offset and length of the register set for the device.

		clock-names:
		items:
		- const: pclk
		- const: clk32k_in
		description:
		Must includes entries pclk and clk32k_in.
		pclk is the Tegra clock of that name and clk32k_in is 32KHz clock
		input to Tegra.

		clocks:
		maxItems: 2
		description:
		Must contain an entry for each entry in clock-names.
		See ../clocks/clocks-bindings.txt for details.

		'#clock-cells':
		const: 1
		description:
		Tegra PMC has clk_out_1, clk_out_2, and clk_out_3.
		PMC also has blink control which allows 32Khz clock output to
		Tegra blink pad.
		Consumer of PMC clock should specify the desired clock by having
		the clock ID in its "clocks" phandle cell with pmc clock provider.
		See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC
		clock IDs.

		'#interrupt-cells':
		const: 2
		description:
		Specifies number of cells needed to encode an interrupt source.
		The value must be 2.

		interrupt-controller: true

		nvidia,invert-interrupt:
		$ref: /schemas/types.yaml#/definitions/flag
		description: Inverts the PMU interrupt signal.
		The PMU is an external Power Management Unit, whose interrupt output
		signal is fed into the PMC. This signal is optionally inverted, and
		then fed into the ARM GIC. The PMC is not involved in the detection
		or handling of this interrupt signal, merely its inversion.

		nvidia,core-power-req-active-high:
		$ref: /schemas/types.yaml#/definitions/flag
		description: Core power request active-high.

		nvidia,sys-clock-req-active-high:
		$ref: /schemas/types.yaml#/definitions/flag
		description: System clock request active-high.

		nvidia,combined-power-req:
		$ref: /schemas/types.yaml#/definitions/flag
		description: combined power request for CPU and Core.

		nvidia,cpu-pwr-good-en:
		$ref: /schemas/types.yaml#/definitions/flag
		description:
		CPU power good signal from external PMIC to PMC is enabled.

		nvidia,suspend-mode:
		allOf:
		- $ref: /schemas/types.yaml#/definitions/uint32
		- enum: [0, 1, 2]
		description:
		The suspend mode that the platform should use.
		Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
		Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh
		Mode 2 is for LP2, CPU voltage off

		nvidia,cpu-pwr-good-time:
		$ref: /schemas/types.yaml#/definitions/uint32
		description: CPU power good time in uSec.

		nvidia,cpu-pwr-off-time:
		$ref: /schemas/types.yaml#/definitions/uint32
		description: CPU power off time in uSec.

		nvidia,core-pwr-good-time:
		$ref: /schemas/types.yaml#/definitions/uint32-array
		description:
		<Oscillator-stable-time Power-stable-time>
		Core power good time in uSec.

		nvidia,core-pwr-off-time:
		$ref: /schemas/types.yaml#/definitions/uint32
		description: Core power off time in uSec.

		nvidia,lp0-vec:
		$ref: /schemas/types.yaml#/definitions/uint32-array
		description:
		<start length> Starting address and length of LP0 vector.
		The LP0 vector contains the warm boot code that is executed
		by AVP when resuming from the LP0 state.
		The AVP (Audio-Video Processor) is an ARM7 processor and
		always being the first boot processor when chip is power on
		or resume from deep sleep mode. When the system is resumed
		from the deep sleep mode, the warm boot code will restore
		some PLLs, clocks and then brings up CPU0 for resuming the
		system.

		i2c-thermtrip:
		type: object
		description:
		On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists,
		hardware-triggered thermal reset will be enabled.

		properties:
		nvidia,i2c-controller-id:
		$ref: /schemas/types.yaml#/definitions/uint32
		description:
		ID of I2C controller to send poweroff command to PMU.
		Valid values are described in section 9.2.148
		"APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference
		Manual.

		nvidia,bus-addr:
		$ref: /schemas/types.yaml#/definitions/uint32
		description: Bus address of the PMU on the I2C bus.

		nvidia,reg-addr:
		$ref: /schemas/types.yaml#/definitions/uint32
		description: PMU I2C register address to issue poweroff command.

		nvidia,reg-data:
		$ref: /schemas/types.yaml#/definitions/uint32
		description: Poweroff command to write to PMU.

		nvidia,pinmux-id:
		$ref: /schemas/types.yaml#/definitions/uint32
		description:
		Pinmux used by the hardware when issuing Poweroff command.
		Defaults to 0. Valid values are described in section 12.5.2
		"Pinmux Support" of the Tegra4 Technical Reference Manual.

		required:
		- nvidia,i2c-controller-id
		- nvidia,bus-addr
		- nvidia,reg-addr
		- nvidia,reg-data

		additionalProperties: false

		powergates:
		type: object
		description: \|
		This node contains a hierarchy of power domain nodes, which should
		match the powergates on the Tegra SoC. Each powergate node
		represents a power-domain on the Tegra SoC that can be power-gated
		by the Tegra PMC.
		Hardware blocks belonging to a power domain should contain
		"power-domains" property that is a phandle pointing to corresponding
		powergate node.
		The name of the powergate node should be one of the below. Note that
		not every powergate is applicable to all Tegra devices and the following
		list shows which powergates are applicable to which devices.
		Please refer to Tegra TRM for mode details on the powergate nodes to
		use for each power-gate block inside Tegra.
		Name Description Devices Applicable
		3d 3D Graphics Tegra20/114/124/210
		3d0 3D Graphics 0 Tegra30
		3d1 3D Graphics 1 Tegra30
		aud Audio Tegra210
		dfd Debug Tegra210
		dis Display A Tegra114/124/210
		disb Display B Tegra114/124/210
		heg 2D Graphics Tegra30/114/124/210
		iram Internal RAM Tegra124/210
		mpe MPEG Encode All
		nvdec NVIDIA Video Decode Engine Tegra210
		nvjpg NVIDIA JPEG Engine Tegra210
		pcie PCIE Tegra20/30/124/210
		sata SATA Tegra30/124/210
		sor Display interfaces Tegra124/210
		ve2 Video Encode Engine 2 Tegra210
		venc Video Encode Engine All
		vdec Video Decode Engine Tegra20/30/114/124
		vic Video Imaging Compositor Tegra124/210
		xusba USB Partition A Tegra114/124/210
		xusbb USB Partition B Tegra114/124/210
		xusbc USB Partition C Tegra114/124/210

		patternProperties:
		"^[a-z0-9]+$":
		type: object

		patternProperties:
		clocks:
		minItems: 1
		maxItems: 8
		description:
		Must contain an entry for each clock required by the PMC
		for controlling a power-gate.
		See ../clocks/clock-bindings.txt document for more details.

		resets:
		minItems: 1
		maxItems: 8
		description:
		Must contain an entry for each reset required by the PMC
		for controlling a power-gate.
		See ../reset/reset.txt for more details.

		'#power-domain-cells':
		const: 0
		description: Must be 0.

		required:
		- clocks
		- resets
		- '#power-domain-cells'

		additionalProperties: false

		patternProperties:
		"^[a-f0-9]+-[a-f0-9]+$":
		type: object
		description:
		This is a Pad configuration node. On Tegra SOCs a pad is a set of
		pins which are configured as a group. The pin grouping is a fixed
		attribute of the hardware. The PMC can be used to set pad power state
		and signaling voltage. A pad can be either in active or power down mode.
		The support for power state and signaling voltage configuration varies
		depending on the pad in question. 3.3V and 1.8V signaling voltages
		are supported on pins where software controllable signaling voltage
		switching is available.

		The pad configuration state nodes are placed under the pmc node and they
		are referred to by the pinctrl client properties. For more information
		see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
		The pad name should be used as the value of the pins property in pin
		configuration nodes.

		The following pads are present on Tegra124 and Tegra132
		audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic,
		hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl,
		sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias.

		The following pads are present on Tegra210
		audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg,
		debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi,
		hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1,
		sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias.

		properties:
		pins:
		$ref: /schemas/types.yaml#/definitions/string
		description: Must contain name of the pad(s) to be configured.

		low-power-enable:
		$ref: /schemas/types.yaml#/definitions/flag
		description: Configure the pad into power down mode.

		low-power-disable:
		$ref: /schemas/types.yaml#/definitions/flag
		description: Configure the pad into active mode.

		power-source:
		$ref: /schemas/types.yaml#/definitions/uint32
		description:
		Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
		TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
		The values are defined in
		include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
		Power state can be configured on all Tegra124 and Tegra132
		pads. None of the Tegra124 or Tegra132 pads support signaling
		voltage switching.
		All of the listed Tegra210 pads except pex-cntrl support power
		state configuration. Signaling voltage switching is supported
		on below Tegra210 pads.
		audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1,
		sdmmc3, spi, spi-hv, and uart.

		required:
		- pins

		additionalProperties: false

		required:
		- compatible
		- reg
		- clock-names
		- clocks
		- '#clock-cells'

		dependencies:
		"nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
		"nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
		"nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]

		examples:
		- \|

		#include <dt-bindings/clock/tegra210-car.h>
		#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
		#include <dt-bindings/soc/tegra-pmc.h>

		tegra_pmc: pmc@7000e400 {
		compatible = "nvidia,tegra210-pmc";
		reg = <0x0 0x7000e400 0x0 0x400>;
		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
		clock-names = "pclk", "clk32k_in";
		#clock-cells = <1>;

		nvidia,invert-interrupt;
		nvidia,suspend-mode = <0>;
		nvidia,cpu-pwr-good-time = <0>;
		nvidia,cpu-pwr-off-time = <0>;
		nvidia,core-pwr-good-time = <4587 3876>;
		nvidia,core-pwr-off-time = <39065>;
		nvidia,core-power-req-active-high;
		nvidia,sys-clock-req-active-high;

		powergates {
		pd_audio: aud {
		clocks = <&tegra_car TEGRA210_CLK_APE>,
		<&tegra_car TEGRA210_CLK_APB2APE>;
		resets = <&tegra_car 198>;
		#power-domain-cells = <0>;
		};

		pd_xusbss: xusba {
		clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
		resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
		#power-domain-cells = <0>;
		};
		};
		};

drivers/clk/tegra/Makefile

+0 −1

Original line number	Diff line number	Diff line
		@@ -12,7 +12,6 @@ obj-y += clk-sdmmc-mux.o
		obj-y += clk-super.o
		obj-y += clk-tegra-audio.o
		obj-y += clk-tegra-periph.o
		obj-y += clk-tegra-pmc.o
		obj-y += clk-tegra-fixed.o
		obj-y += clk-tegra-super-gen4.o
		obj-$(CONFIG_TEGRA_CLK_EMC) += clk-emc.o

drivers/clk/tegra/clk-id.h

+3 −9

Original line number	Diff line number	Diff line
		@@ -32,7 +32,6 @@ enum clk_id {
		tegra_clk_audio4,
		tegra_clk_audio4_2x,
		tegra_clk_audio4_mux,
		tegra_clk_blink,
		tegra_clk_bsea,
		tegra_clk_bsev,
		tegra_clk_cclk_g,
		@@ -44,14 +43,9 @@ enum clk_id {
		tegra_clk_clk72Mhz,
		tegra_clk_clk72Mhz_8,
		tegra_clk_clk_m,
		tegra_clk_clk_m_div2,
		tegra_clk_clk_m_div4,
		tegra_clk_clk_out_1,
		tegra_clk_clk_out_1_mux,
		tegra_clk_clk_out_2,
		tegra_clk_clk_out_2_mux,
		tegra_clk_clk_out_3,
		tegra_clk_clk_out_3_mux,
		tegra_clk_osc,
		tegra_clk_osc_div2,
		tegra_clk_osc_div4,
		tegra_clk_cml0,
		tegra_clk_cml1,
		tegra_clk_csi,

drivers/clk/tegra/clk-tegra-fixed.c

+21 −16

File changed.

Preview size limit exceeded, changes collapsed.

Admin message