+152
−27
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
With TimeSync version 4 protocol support we started updating system time continuously through the whole lifetime of Hyper-V guests. Every 5 seconds there is a time sample from the host which triggers do_settimeofday[64](). While the time from the host is very accurate such adjustments may cause issues: - Time is jumping forward and backward, some applications may misbehave. - In case an NTP server runs in parallel and uses something else for time sync (network, PTP,...) system time will never converge. - Systemd starts annoying you by printing "Time has been changed" every 5 seconds to the system log. Instead of doing in-kernel time adjustments offload the work to an NTP client by exposing TimeSync messages as a PTP device. Users may now decide what they want to use as a source. I tested the solution with chrony, the config was: refclock PHC /dev/ptp0 poll 3 dpoll -2 offset 0 The result I'm seeing is accurate enough, the time delta between the guest and the host is almost always within [-10us, +10us], the in-kernel solution was giving us comparable results. I also tried implementing PPS device instead of PTP by using not currently used Hyper-V synthetic timers (we use only one of four for clockevent) but with PPS source only chrony wasn't able to give me the required accuracy, the delta often more that 100us. Signed-off-by:Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CRA Git | Maintained and supported by SUSTech CRA and CCSE