ARM: sun8i: a83t: Add device tree for Sinovoip Bananapi BPI-M3

	sun8i-a33-q8-tablet.dtb \

	sun8i-a33-sinlinx-sina33.dtb \

	sun8i-a83t-allwinner-h8homlet-v2.dtb \

	sun8i-a83t-bananapi-m3.dtb \

	sun8i-a83t-cubietruck-plus.dtb \

	sun8i-h2-plus-orangepi-zero.dtb \

	sun8i-h3-bananapi-m2-plus.dtb \

/*

 * Copyright 2017 Chen-Yu Tsai

 *

 * Chen-Yu Tsai <wens@csie.org>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */

/dts-v1/;

#include "sun8i-a83t.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {

	model = "Banana Pi BPI-M3";

	compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";

	aliases {

		serial0 = &uart0;

	};

	chosen {

		stdout-path = "serial0:115200n8";

	};

};

&ehci0 {

	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */

	status = "okay";

	/* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */

};

&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */

	cd-inverted;

	status = "okay";

};

&mmc2 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc2_8bit_emmc_pins>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <8>;

	non-removable;

	cap-mmc-hw-reset;

	status = "okay";

};

&r_rsb {

	status = "okay";

	axp81x: pmic@3a3 {

		compatible = "x-powers,axp813";

		reg = <0x3a3>;

		interrupt-parent = <&r_intc>;

		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

	};

	ac100: codec@e89 {

		compatible = "x-powers,ac100";

		reg = <0xe89>;

		ac100_codec: codec {

			compatible = "x-powers,ac100-codec";

			interrupt-parent = <&r_pio>;

			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */

			#clock-cells = <0>;

			clock-output-names = "4M_adda";

		};

		ac100_rtc: rtc {

			compatible = "x-powers,ac100-rtc";

			interrupt-parent = <&r_intc>;

			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

			clocks = <&ac100_codec>;

			#clock-cells = <1>;

			clock-output-names = "cko1_rtc",

					     "cko2_rtc",

					     "cko3_rtc";

		};

	};

};

&reg_usb1_vbus {

	gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */

	status = "okay";

};

&reg_vcc3v0 {

	status = "disabled";

};

&reg_vcc5v0 {

	status = "disabled";

};

&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pb_pins>;

	status = "okay";

};

&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	status = "okay";

};