Commit 35669b39 authored by Iain Paton's avatar Iain Paton Committed by Maxime Ripard
Browse files

ARM: sun7i: add support for A20-OLinuXino-Lime2 

This adds support for the Olimex A20-OLinuXino-Lime2
https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2



Differences to previous Lime boards are 1GB RAM and gigabit ethernet

Signed-off-by: default avatarIain Paton <ipaton0@gmail.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent f9554fb4

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -442,6 +442,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ 
	sun7i-a20-i12-tvbox.dtb \

	sun7i-a20-m3.dtb \

	sun7i-a20-olinuxino-lime.dtb \

	sun7i-a20-olinuxino-lime2.dtb \

	sun7i-a20-olinuxino-micro.dtb \

	sun7i-a20-pcduino3.dtb

dtb-$(CONFIG_MACH_SUN8I) += \

arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts

0 → 100644
+228 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2014 - Iain Paton <ipaton0@gmail.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This library is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This library is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 *     You should have received a copy of the GNU General Public

 *     License along with this library; if not, write to the Free

 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,

 *     MA 02110-1301 USA

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

/include/ "sun7i-a20.dtsi"

/include/ "sunxi-common-regulators.dtsi"



/ {

	model = "Olimex A20-OLinuXino-LIME2";

	compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";



	soc@01c00000 {

		mmc0: mmc@01c0f000 {

			pinctrl-names = "default";

			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;

			vmmc-supply = <&reg_vcc3v3>;

			bus-width = <4>;

			cd-gpios = <&pio 7 1 0>; /* PH1 */

			cd-inverted;

			status = "okay";

		};



		usbphy: phy@01c13400 {

			usb1_vbus-supply = <&reg_usb1_vbus>;

			usb2_vbus-supply = <&reg_usb2_vbus>;

			status = "okay";

		};



		ehci0: usb@01c14000 {

			status = "okay";

		};



		ohci0: usb@01c14400 {

			status = "okay";

		};



		ahci: sata@01c18000 {

			target-supply = <&reg_ahci_5v>;

			status = "okay";

		};



		ehci1: usb@01c1c000 {

			status = "okay";

		};



		ohci1: usb@01c1c400 {

			status = "okay";

		};



		pinctrl@01c20800 {

			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {

				allwinner,pins = "PC3";

				allwinner,function = "gpio_out";

				allwinner,drive = <0>;

				allwinner,pull = <0>;

			};



			led_pins_olinuxinolime: led_pins@0 {

				allwinner,pins = "PH2";

				allwinner,function = "gpio_out";

				allwinner,drive = <1>;

				allwinner,pull = <0>;

			};

		};



		uart0: serial@01c28000 {

			pinctrl-names = "default";

			pinctrl-0 = <&uart0_pins_a>;

			status = "okay";

		};



		i2c0: i2c@01c2ac00 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c0_pins_a>;

			status = "okay";



			axp209: pmic@34 {

				compatible = "x-powers,axp209";

				reg = <0x34>;

				interrupt-parent = <&nmi_intc>;

				interrupts = <0 8>;



				interrupt-controller;

				#interrupt-cells = <1>;



				acin-supply = <&reg_axp_ipsout>;

				vin2-supply = <&reg_axp_ipsout>;

				vin3-supply = <&reg_axp_ipsout>;

				ldo24in-supply = <&reg_axp_ipsout>;

				ldo3in-supply = <&reg_axp_ipsout>;



				regulators {

					vdd_rtc: ldo1 {

						regulator-min-microvolt = <1300000>;

						regulator-max-microvolt = <1300000>;

						regulator-always-on;

					};



					avcc: ldo2 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <3300000>;

						regulator-always-on;

					};



					vcc_csi0: ldo3 {

						regulator-min-microvolt = <700000>;

						regulator-max-microvolt = <3500000>;

						regulator-always-on;

					};



					vcc_csi1: ldo4 {

						regulator-min-microvolt = <1250000>;

						regulator-max-microvolt = <3300000>;

						regulator-always-on;

					};



					vdd_cpu: dcdc2 {

						regulator-min-microvolt = <700000>;

						regulator-max-microvolt = <2275000>;

						regulator-always-on;

					};



					vdd_int: dcdc3 {

						regulator-min-microvolt = <700000>;

						regulator-max-microvolt = <3500000>;

						regulator-always-on;

					};

				};

			};

		};



		i2c1: i2c@01c2b000 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c1_pins_a>;

			status = "okay";

		};



		gmac: ethernet@01c50000 {

			pinctrl-names = "default";

			pinctrl-0 = <&gmac_pins_rgmii_a>;

			phy = <&phy1>;

			phy-mode = "rgmii";

			status = "okay";



			phy1: ethernet-phy@1 {

				reg = <1>;

			};

		};

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_olinuxinolime>;



		green {

			label = "a20-olinuxino-lime2:green:usr";

			gpios = <&pio 7 2 0>;

			default-state = "on";

		};

	};



	reg_ahci_5v: ahci-5v {

		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;

		gpio = <&pio 2 3 0>;

		status = "okay";

	};



	reg_usb1_vbus: usb1-vbus {

		status = "okay";

	};



	reg_usb2_vbus: usb2-vbus {

		status = "okay";

	};



	reg_axp_ipsout: axp_ipsout {

		compatible = "regulator-fixed";

		regulator-name = "axp-ipsout";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-always-on;

	};

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE