Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

POHMELFS: Parallel Optimized Host Message Exchange Layered File System.

		Evgeniy Polyakov <zbr@ioremap.net>

Homepage: http://www.ioremap.net/projects/pohmelfs

POHMELFS first began as a network filesystem with coherent local data and

metadata caches but is now evolving into a parallel distributed filesystem.

Main features of this FS include:

 * Locally coherent cache for data and metadata with (potentially) byte-range locks.

	Since all Linux filesystems lock the whole inode during writing, algorithm

	is very simple and does not use byte-ranges, although they are sent in

	locking messages.

 * Completely async processing of all events except creation of hard and symbolic

	links, and rename events.

	Object creation and data reading and writing are processed asynchronously.

 * Flexible object architecture optimized for network processing.

	Ability to create long paths to objects and remove arbitrarily huge

	directories with a single network command.

	(like removing the whole kernel tree via a single network command).

 * Very high performance.

 * Fast and scalable multithreaded userspace server. Being in userspace it works

	with any underlying filesystem and still is much faster than async in-kernel NFS one.

 * Client is able to switch between different servers (if one goes down, client

	automatically reconnects to second and so on).

 * Transactions support. Full failover for all operations.

	Resending transactions to different servers on timeout or error.

 * Read request (data read, directory listing, lookup requests) balancing between multiple servers.

 * Write requests are replicated to multiple servers and completed only when all of them are acked.

 * Ability to add and/or remove servers from the working set at run-time.

 * Strong authentification and possible data encryption in network channel.

 * Extended attributes support.

POHMELFS is based on transactions, which are potentially long-standing objects that live

in the client's memory. Each transaction contains all the information needed to process a given

command (or set of commands, which is frequently used during data writing: single transactions

can contain creation and data writing commands). Transactions are committed by all the servers

to which they are sent and, in case of failures, are eventually resent or dropped with an error.

For example, reading will return an error if no servers are available.

POHMELFS uses a asynchronous approach to data processing. Courtesy of transactions, it is

possible to detach replies from requests and, if the command requires data to be received, the

caller sleeps waiting for it. Thus, it is possible to issue multiple read commands to different

servers and async threads will pick up replies in parallel, find appropriate transactions in the

system and put the data where it belongs (like the page or inode cache).

The main feature of POHMELFS is writeback data and the metadata cache.

Only a few non-performance critical operations use the write-through cache and

are synchronous: hard and symbolic link creation, and object rename. Creation,

removal of objects and data writing are asynchronous and are sent to

the server during system writeback. Only one writer at a time is allowed for any

given inode, which is guarded by an appropriate locking protocol.

Because of this feature, POHMELFS is extremely fast at metadata intensive

workloads and can fully utilize the bandwidth to the servers when doing bulk

data transfers.

POHMELFS clients operate with a working set of servers and are capable of balancing read-only

operations (like lookups or directory listings) between them.

Administrators can add or remove servers from the set at run-time via special commands (described

in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.

POHMELFS is capable of full data channel encryption and/or strong crypto hashing.

One can select any kernel supported cipher, encryption mode, hash type and operation mode

(hmac or digest). It is also possible to use both or neither (default). Crypto configuration

is checked during mount time and, if the server does not support it, appropriate capabilities

will be disabled or mount will fail (if 'crypto_fail_unsupported' mount option is specified).

Crypto performance heavily depends on the number of crypto threads, which asynchronously perform

crypto operations and send the resulting data to server or submit it up the stack. This number

can be controlled via a mount option.

POHMELFS usage information.

Mount options:

idx=%u

 Each mountpoint is associated with a special index via this option.

 Administrator can add or remove servers from the given index, so all mounts,

 which were attached to it, are updated.

 Default it is 0.

trans_scan_timeout=%u

 This timeout, expressed in milliseconds, specifies time to scan transaction

 trees looking for stale requests, which have to be resent, or if number of

 retries exceed specified limit, dropped with error.

 Default is 5 seconds.

drop_scan_timeout=%u

 Internal timeout, expressed in milliseconds, which specifies how frequently

 inodes marked to be dropped are freed. It also specifies how frequently

 the system checks that servers have to be added or removed from current working set.

 Default is 1 second.

wait_on_page_timeout=%u

 Number of milliseconds to wait for reply from remote server for data reading command.

 If this timeout is exceeded, reading returns an error.

 Default is 5 seconds.

trans_retries=%u

 This is the number of times that a transaction will be resent to a server that did

 not answer for the last @trans_scan_timeout milliseconds.

 When the number of resends exceeds this limit, the transaction is completed with error.

 Default is 5 resends.

crypto_thread_num=%u

 Number of crypto processing threads. Threads are used both for RX and TX traffic.

 Default is 2, or no threads if crypto operations are not supported.

trans_max_pages=%u

 Maximum number of pages in a single transaction. This parameter also controls

 the number of pages,  allocated for crypto processing (each crypto thread has

 pool of pages, the number of which is equal to 'trans_max_pages'.

 Default is 100 pages.

crypto_fail_unsupported

 If specified, mount will fail if the server does not support requested crypto operations.

 By default mount will disable non-matching crypto operations.

mcache_timeout=%u

 Maximum number of milliseconds to wait for the mcache objects to be processed.

 Mcache includes locks (given lock should be granted by server), attributes (they should be

 fully received in the given timeframe).

 Default is 5 seconds.

Usage examples.

Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx

with appropriate hash algorithm and key file and cipher algorithm, mode and key file:

$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key

Mount filesystem with given index $idx to /mnt mountpoint.

Client will connect to all servers specified in the working set via previous command:

mount -t pohmel -o idx=$idx q /mnt

One can add or remove servers from working set after mounting too.

Server installation.

Creating a server, which listens at port 1025 and 0.0.0.0 address.

Working root directory (note, that server chroots there, so you have to have appropriate permissions)

is set to /mnt, server will negotiate hash/cipher with client, in case client requested it, there

are appropriate key files.

Number of working threads is set to 10.

# ./fserver -a 0.0.0.0 -p 1025 -r /mnt -w 10 -K hash_key -k cipher_key

 -A 6			 - listen on ipv6 address. Default: Disabled.

 -r root                 - path to root directory. Default: /tmp.

 -a addr                 - listen address. Default: 0.0.0.0.

 -p port                 - listen port. Default: 1025.

 -w workers              - number of workers per connected client. Default: 1.

 -K file		 - hash key size. Default: none.

 -k file		 - cipher key size. Default: none.

 -h                      - this help.

Number of worker threads specifies how many workers will be created for each client.

Bulk single-client transafers usually are better handled with smaller number (like 1-3).

POHMELFS network protocol.

Basic structure used in network communication is following command:

struct netfs_cmd

{

	__u16			cmd;	/* Command number */

	__u16			csize;	/* Attached crypto information size */

	__u16			cpad;	/* Attached padding size */

	__u16			ext;	/* External flags */

	__u32			size;	/* Size of the attached data */

	__u32			trans;	/* Transaction id */

	__u64			id;	/* Object ID to operate on. Used for feedback.*/

	__u64			start;	/* Start of the object. */

	__u64			iv;	/* IV sequence */

	__u8			data[0];

};

Commands can be embedded into transaction command (which in turn has own command),

so one can extend protocol as needed without breaking backward compatibility as long

as old commands are supported. All string lengths include tail 0 byte.

All commans are transfered over the network in big-endian. CPU endianess is used at the end peers.

@cmd - command number, which specifies command to be processed. Following

	commands are used currently:

	NETFS_READDIR	= 1,	/* Read directory for given inode number */

	NETFS_READ_PAGE,	/* Read data page from the server */

	NETFS_WRITE_PAGE,	/* Write data page to the server */

	NETFS_CREATE,		/* Create directory entry */

	NETFS_REMOVE,		/* Remove directory entry */

	NETFS_LOOKUP,		/* Lookup single object */

	NETFS_LINK,		/* Create a link */

	NETFS_TRANS,		/* Transaction */

	NETFS_OPEN,		/* Open intent */

	NETFS_INODE_INFO,	/* Metadata cache coherency synchronization message */

	NETFS_PAGE_CACHE,	/* Page cache invalidation message */

	NETFS_READ_PAGES,	/* Read multiple contiguous pages in one go */

	NETFS_RENAME,		/* Rename object */

	NETFS_CAPABILITIES,	/* Capabilities of the client, for example supported crypto */

	NETFS_LOCK,		/* Distributed lock message */

	NETFS_XATTR_SET,	/* Set extended attribute */

	NETFS_XATTR_GET,	/* Get extended attribute */

@ext - external flags. Used by different commands to specify some extra arguments

	like partial size of the embedded objects or creation flags.

@size - size of the attached data. For NETFS_READ_PAGE and NETFS_READ_PAGES no data is attached,

	but size of the requested data is incorporated here. It does not include size of the command

	header (struct netfs_cmd) itself.

@id - id of the object this command operates on. Each command can use it for own purpose.

@start - start of the object this command operates on. Each command can use it for own purpose.

@csize, @cpad - size and padding size of the (attached if needed) crypto information.

Command specifications.

@NETFS_READDIR

This command is used to sync content of the remote dir to the client.

@ext - length of the path to object.

@size - the same.

@id - local inode number of the directory to read.

@start - zero.

@NETFS_READ_PAGE

This command is used to read data from remote server.

Data size does not exceed local page cache size.

@id - inode number.

@start - first byte offset.

@size - number of bytes to read plus length of the path to object.

@ext - object path length.

@NETFS_CREATE

Used to create object.

It does not require that all directories on top of the object were

already created, it will create them automatically. Each object has

associated @netfs_path_entry data structure, which contains creation

mode (permissions and type) and length of the name as long as name itself.

@start - 0

@size - size of the all data structures needed to create a path

@id - local inode number

@ext - 0

@NETFS_REMOVE

Used to remove object.

@ext - length of the path to object.

@size - the same.

@id - local inode number.

@start - zero.

@NETFS_LOOKUP

Lookup information about object on server.

@ext - length of the path to object.

@size - the same.

@id - local inode number of the directory to look object in.

@start - local inode number of the object to look at.

@NETFS_LINK

Create hard of symlink.

Command is sent as "object_path|target_path".

@size - size of the above string.

@id - parent local inode number.

@start - 1 for symlink, 0 for hardlink.

@ext - size of the "object_path" above.

@NETFS_TRANS

Transaction header.

@size - incorporates all embedded command sizes including theirs header sizes.

@start - transaction generation number - unique id used to find transaction.

@ext - transaction flags. Unused at the moment.

@id - 0.

@NETFS_OPEN

Open intent for given transaction.

@id - local inode number.

@start - 0.

@size - path length to the object.

@ext - open flags (O_RDWR and so on).

@NETFS_INODE_INFO

Metadata update command.

It is sent to servers when attributes of the object are changed and received

when data or metadata were updated. It operates with the following structure:

struct netfs_inode_info

{

	unsigned int		mode;

	unsigned int		nlink;

	unsigned int		uid;

	unsigned int		gid;

	unsigned int		blocksize;

	unsigned int		padding;

	__u64			ino;

	__u64			blocks;

	__u64			rdev;

	__u64			size;

	__u64			version;

};

It effectively mirrors stat(2) returned data.

@ext - path length to the object.

@size - the same plus size of the netfs_inode_info structure.

@id - local inode number.

@start - 0.

@NETFS_PAGE_CACHE

Command is only received by clients. It contains information about

page to be marked as not up-to-date.

@id - client's inode number.

@start - last byte of the page to be invalidated. If it is not equal to

	current inode size, it will be vmtruncated().

@size - 0

@ext - 0

@NETFS_READ_PAGES

Used to read multiple contiguous pages in one go.

@start - first byte of the contiguous region to read.

@size - contains of two fields: lower 8 bits are used to represent page cache shift

	used by client, another 3 bytes are used to get number of pages.

@id - local inode number.

@ext - path length to the object.

@NETFS_RENAME

Used to rename object.

Attached data is formed into following string: "old_path|new_path".

@id - local inode number.

@start - parent inode number.

@size - length of the above string.

@ext - length of the old path part.

@NETFS_CAPABILITIES

Used to exchange crypto capabilities with server.

If crypto capabilities are not supported by server, then client will disable it

or fail (if 'crypto_fail_unsupported' mount options was specified).

@id - superblock index. Used to specify crypto information for group of servers.

@size - size of the attached capabilities structure.

@start - 0.

@size - 0.

@scsize - 0.

@NETFS_LOCK

Used to send lock request/release messages. Although it sends byte range request

and is capable of flushing pages based on that, it is not used, since all Linux

filesystems lock the whole inode.

@id - lock generation number.

@start - start of the locked range.

@size - size of the locked range.

@ext - lock type: read/write. Not used actually. 15'th bit is used to determine,

	if it is lock request (1) or release (0).

@NETFS_XATTR_SET

@NETFS_XATTR_GET

Used to set/get extended attributes for given inode.

@id - attribute generation number or xattr setting type

@start - size of the attribute (request or attached)

@size - name length, path len and data size for given attribute

@ext - path length for given object

source "drivers/staging/rt2870/Kconfig"

source "drivers/staging/rt3070/Kconfig"

source "drivers/staging/comedi/Kconfig"

source "drivers/staging/asus_oled/Kconfig"

source "drivers/staging/android/Kconfig"

source "drivers/staging/dst/Kconfig"

source "drivers/staging/pohmelfs/Kconfig"

source "drivers/staging/stlc45xx/Kconfig"

source "drivers/staging/uc2322/Kconfig"

source "drivers/staging/b3dfg/Kconfig"

source "drivers/staging/phison/Kconfig"

source "drivers/staging/p9auth/Kconfig"

source "drivers/staging/heci/Kconfig"

source "drivers/staging/line6/Kconfig"

source "drivers/staging/serqt_usb/Kconfig"

endif # !STAGING_EXCLUDE_BUILD

endif # STAGING

obj-$(CONFIG_OTUS)		+= otus/

obj-$(CONFIG_RT2860)		+= rt2860/

obj-$(CONFIG_RT2870)		+= rt2870/

obj-$(CONFIG_RT3070)		+= rt3070/

obj-$(CONFIG_COMEDI)		+= comedi/

obj-$(CONFIG_ASUS_OLED)		+= asus_oled/

obj-$(CONFIG_PANEL)		+= panel/

obj-$(CONFIG_TRANZPORT)		+= frontier/

obj-$(CONFIG_EPL)		+= epl/

obj-$(CONFIG_ANDROID)		+= android/

obj-$(CONFIG_DST)		+= dst/

obj-$(CONFIG_POHMELFS)		+= pohmelfs/

obj-$(CONFIG_STLC45XX)		+= stlc45xx/

obj-$(CONFIG_USB_SERIAL_ATEN2011)	+= uc2322/

obj-$(CONFIG_B3DFG)		+= b3dfg/

obj-$(CONFIG_IDE_PHISON)	+= phison/

obj-$(CONFIG_PLAN9AUTH)		+= p9auth/

obj-$(CONFIG_HECI)		+= heci/

obj-$(CONFIG_LINE6_USB)		+= line6/

obj-$(CONFIG_USB_SERIAL_QUATECH_ESU100)	+= serqt_usb/