media: drxj and drxk: don't produce kernel-doc warnings (34eb9751) · Commits · 戴 / test

drivers/media/dvb-frontends/drx39xyj/drxj.c

+124 −124

Original line number	Diff line number	Diff line
		@@ -73,7 +73,7 @@ INCLUDE FILES

		#define DRX39XX_MAIN_FIRMWARE "dvb-fe-drxj-mc-1.0.8.fw"

		/**
		/*
		* \brief Maximum u32 value.
		*/
		#ifndef MAX_U32
		@@ -100,8 +100,8 @@ INCLUDE FILES
		#ifndef OOB_DRX_DRIVE_STRENGTH
		#define OOB_DRX_DRIVE_STRENGTH 0x02
		#endif
		/** START DJCOMBO patches to DRXJ registermap constants *******************/
		/** registermap 200706071303 from drxj ************************************/
		/* START DJCOMBO patches to DRXJ registermap constants *******************/
		/* registermap 200706071303 from drxj ************************************/
		#define ATV_TOP_CR_AMP_TH_FM 0x0
		#define ATV_TOP_CR_AMP_TH_L 0xA
		#define ATV_TOP_CR_AMP_TH_LP 0xA
		@@ -188,7 +188,7 @@ INCLUDE FILES
		#define IQM_RC_ADJ_SEL_B_OFF 0x0
		#define IQM_RC_ADJ_SEL_B_QAM 0x1
		#define IQM_RC_ADJ_SEL_B_VSB 0x2
		/** END DJCOMBO patches to DRXJ registermap *******************************/
		/* END DJCOMBO patches to DRXJ registermap *******************************/

		#include "drx_driver_version.h"

		@@ -208,25 +208,25 @@ DEFINES
		#define DRXJ_WAKE_UP_KEY (demod->my_i2c_dev_addr->i2c_addr)
		#endif

		/**
		/*
		* \def DRXJ_DEF_I2C_ADDR
		* \brief Default I2C address of a demodulator instance.
		*/
		#define DRXJ_DEF_I2C_ADDR (0x52)

		/**
		/*
		* \def DRXJ_DEF_DEMOD_DEV_ID
		* \brief Default device identifier of a demodultor instance.
		*/
		#define DRXJ_DEF_DEMOD_DEV_ID (1)

		/**
		/*
		* \def DRXJ_SCAN_TIMEOUT
		* \brief Timeout value for waiting on demod lock during channel scan (millisec).
		*/
		#define DRXJ_SCAN_TIMEOUT 1000

		/**
		/*
		* \def HI_I2C_DELAY
		* \brief HI timing delay for I2C timing (in nano seconds)
		*
		@@ -234,7 +234,7 @@ DEFINES
		*/
		#define HI_I2C_DELAY 42

		/**
		/*
		* \def HI_I2C_BRIDGE_DELAY
		* \brief HI timing delay for I2C timing (in nano seconds)
		*
		@@ -242,13 +242,13 @@ DEFINES
		*/
		#define HI_I2C_BRIDGE_DELAY 750

		/**
		/*
		* \brief Time Window for MER and SER Measurement in Units of Segment duration.
		*/
		#define VSB_TOP_MEASUREMENT_PERIOD 64
		#define SYMBOLS_PER_SEGMENT 832

		/**
		/*
		* \brief bit rate and segment rate constants used for SER and BER.
		*/
		/* values taken from the QAM microcode */
		@@ -260,21 +260,21 @@ DEFINES
		#define DRXJ_QAM_SL_SIG_POWER_QAM64 43008
		#define DRXJ_QAM_SL_SIG_POWER_QAM128 20992
		#define DRXJ_QAM_SL_SIG_POWER_QAM256 43520
		/**
		/*
		* \brief Min supported symbolrates.
		*/
		#ifndef DRXJ_QAM_SYMBOLRATE_MIN
		#define DRXJ_QAM_SYMBOLRATE_MIN (520000)
		#endif

		/**
		/*
		* \brief Max supported symbolrates.
		*/
		#ifndef DRXJ_QAM_SYMBOLRATE_MAX
		#define DRXJ_QAM_SYMBOLRATE_MAX (7233000)
		#endif

		/**
		/*
		* \def DRXJ_QAM_MAX_WAITTIME
		* \brief Maximal wait time for QAM auto constellation in ms
		*/
		@@ -290,7 +290,7 @@ DEFINES
		#define DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME 200
		#endif

		/**
		/*
		* \def SCU status and results
		* \brief SCU
		*/
		@@ -299,7 +299,7 @@ DEFINES
		#define FEC_RS_MEASUREMENT_PERIOD 12894 /* 1 sec */
		#define FEC_RS_MEASUREMENT_PRESCALE 1 /* n sec */

		/**
		/*
		* \def DRX_AUD_MAX_DEVIATION
		* \brief Needed for calculation of prescale feature in AUD
		*/
		@@ -307,14 +307,14 @@ DEFINES
		#define DRXJ_AUD_MAX_FM_DEVIATION 100 /* kHz */
		#endif

		/**
		/*
		* \brief Needed for calculation of NICAM prescale feature in AUD
		*/
		#ifndef DRXJ_AUD_MAX_NICAM_PRESCALE
		#define DRXJ_AUD_MAX_NICAM_PRESCALE (9) /* dB */
		#endif

		/**
		/*
		* \brief Needed for calculation of NICAM prescale feature in AUD
		*/
		#ifndef DRXJ_AUD_MAX_WAITTIME
		@@ -371,21 +371,21 @@ DEFINES
		/============================================================================/
		/=== GLOBAL VARIABLEs =======================================================/
		/============================================================================/
		/**
		/*
		*/

		/**
		/*
		* \brief Temporary register definitions.
		* (register definitions that are not yet available in register master)
		*/

		/******************************************************************************/
		/*****************************************************************************/
		/* Audio block 0x103 is write only. To avoid shadowing in driver accessing */
		/* RAM adresses directly. This must be READ ONLY to avoid problems. */
		/* Writing to the interface adresses is more than only writing the RAM */
		/* locations */
		/******************************************************************************/
		/**
		/*****************************************************************************/
		/*
		* \brief RAM location of MODUS registers
		*/
		#define AUD_DEM_RAM_MODUS_HI__A 0x10204A3
		@@ -394,13 +394,13 @@ DEFINES
		#define AUD_DEM_RAM_MODUS_LO__A 0x10204A4
		#define AUD_DEM_RAM_MODUS_LO__M 0x0FFF

		/**
		/*
		* \brief RAM location of I2S config registers
		*/
		#define AUD_DEM_RAM_I2S_CONFIG1__A 0x10204B1
		#define AUD_DEM_RAM_I2S_CONFIG2__A 0x10204B2

		/**
		/*
		* \brief RAM location of DCO config registers
		*/
		#define AUD_DEM_RAM_DCO_B_HI__A 0x1020461
		@@ -408,20 +408,20 @@ DEFINES
		#define AUD_DEM_RAM_DCO_A_HI__A 0x1020463
		#define AUD_DEM_RAM_DCO_A_LO__A 0x1020464

		/**
		/*
		* \brief RAM location of Threshold registers
		*/
		#define AUD_DEM_RAM_NICAM_THRSHLD__A 0x102045A
		#define AUD_DEM_RAM_A2_THRSHLD__A 0x10204BB
		#define AUD_DEM_RAM_BTSC_THRSHLD__A 0x10204A6

		/**
		/*
		* \brief RAM location of Carrier Threshold registers
		*/
		#define AUD_DEM_RAM_CM_A_THRSHLD__A 0x10204AF
		#define AUD_DEM_RAM_CM_B_THRSHLD__A 0x10204B0

		/**
		/*
		* \brief FM Matrix register fix
		*/
		#ifdef AUD_DEM_WR_FM_MATRIX__A
		@@ -430,7 +430,7 @@ DEFINES
		#define AUD_DEM_WR_FM_MATRIX__A 0x105006F

		/============================================================================/
		/**
		/*
		* \brief Defines required for audio
		*/
		#define AUD_VOLUME_ZERO_DB 115
		@@ -443,14 +443,14 @@ DEFINES
		#define AUD_I2S_FREQUENCY_MIN 12000UL
		#define AUD_RDS_ARRAY_SIZE 18

		/**
		/*
		* \brief Needed for calculation of prescale feature in AUD
		*/
		#ifndef DRX_AUD_MAX_FM_DEVIATION
		#define DRX_AUD_MAX_FM_DEVIATION (100) /* kHz */
		#endif

		/**
		/*
		* \brief Needed for calculation of NICAM prescale feature in AUD
		*/
		#ifndef DRX_AUD_MAX_NICAM_PRESCALE
		@@ -478,7 +478,7 @@ DEFINES
		/=== REGISTER ACCESS MACROS =================================================/
		/============================================================================/

		/**
		/*
		* This macro is used to create byte arrays for block writes.
		* Block writes speed up I2C traffic between host and demod.
		* The macro takes care of the required byte order in a 16 bits word.
		@@ -486,7 +486,7 @@ DEFINES
		*/
		#define DRXJ_16TO8(x) ((u8) (((u16)x) & 0xFF)), \
		((u8)((((u16)x)>>8)&0xFF))
		/**
		/*
		* This macro is used to convert byte array to 16 bit register value for block read.
		* Block read speed up I2C traffic between host and demod.
		* The macro takes care of the required byte order in a 16 bits word.
		@@ -501,7 +501,7 @@ DEFINES
		/=== HI COMMAND RELATED DEFINES =============================================/
		/============================================================================/

		/**
		/*
		* \brief General maximum number of retries for ucode command interfaces
		*/
		#define DRXJ_MAX_RETRIES (100)
		@@ -807,7 +807,7 @@ static struct drxj_data drxj_data_g = {
		},
		};

		/**
		/*
		* \var drxj_default_addr_g
		* \brief Default I2C address and device identifier.
		*/
		@@ -816,7 +816,7 @@ static struct i2c_device_addr drxj_default_addr_g = {
		DRXJ_DEF_DEMOD_DEV_ID /* device id */
		};

		/**
		/*
		* \var drxj_default_comm_attr_g
		* \brief Default common attributes of a drxj demodulator instance.
		*/
		@@ -887,7 +887,7 @@ static struct drx_common_attr drxj_default_comm_attr_g = {
		0 /* mfx */
		};

		/**
		/*
		* \var drxj_default_demod_g
		* \brief Default drxj demodulator instance.
		*/
		@@ -897,7 +897,7 @@ static struct drx_demod_instance drxj_default_demod_g = {
		&drxj_data_g /* demod device specific attributes */
		};

		/**
		/*
		* \brief Default audio data structure for DRK demodulator instance.
		*
		* This structure is DRXK specific.
		@@ -997,7 +997,7 @@ struct drxj_hi_cmd {
		/=== MICROCODE RELATED STRUCTURES ===========================================/
		/============================================================================/

		/**
		/*
		* struct drxu_code_block_hdr - Structure of the microcode block headers
		*
		* @addr: Destination address of the data in this block
		@@ -1086,7 +1086,7 @@ static u32 frac28(u32 N, u32 D)
		return Q1;
		}

		/**
		/*
		* \fn u32 log1_times100( u32 x)
		* \brief Compute: 100*log10(x)
		* \param x 32 bits
		@@ -1198,7 +1198,7 @@ static u32 log1_times100(u32 x)

		}

		/**
		/*
		* \fn u32 frac_times1e6( u16 N, u32 D)
		* \brief Compute: (N/D) * 1000000.
		* \param N nominator 16-bits.
		@@ -1235,7 +1235,7 @@ static u32 frac_times1e6(u32 N, u32 D)
		/============================================================================/


		/**
		/*
		* \brief Values for NICAM prescaler gain. Computed from dB to integer
		* and rounded. For calc used formula: 16*10^(prescaleGain[dB]/20).
		*
		@@ -1280,7 +1280,7 @@ static const u16 nicam_presc_table_val[43] = {
		#define DRXJ_DAP_AUDTRIF_TIMEOUT 80 /* millisec */
		/============================================================================/

		/**
		/*
		* \fn bool is_handled_by_aud_tr_if( u32 addr )
		* \brief Check if this address is handled by the audio token ring interface.
		* \param addr
		@@ -1386,7 +1386,7 @@ int drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr,

		/============================================================================/

		/******************************
		/*****************************
		*
		* int drxdap_fasi_read_block (
		* struct i2c_device_addr *dev_addr, -- address of I2C device
		@@ -1498,7 +1498,7 @@ static int drxdap_fasi_read_block(struct i2c_device_addr *dev_addr,
		}


		/******************************
		/*****************************
		*
		* int drxdap_fasi_read_reg16 (
		* struct i2c_device_addr *dev_addr, -- address of I2C device
		@@ -1531,7 +1531,7 @@ static int drxdap_fasi_read_reg16(struct i2c_device_addr *dev_addr,
		return rc;
		}

		/******************************
		/*****************************
		*
		* int drxdap_fasi_read_reg32 (
		* struct i2c_device_addr *dev_addr, -- address of I2C device
		@@ -1566,7 +1566,7 @@ static int drxdap_fasi_read_reg32(struct i2c_device_addr *dev_addr,
		return rc;
		}

		/******************************
		/*****************************
		*
		* int drxdap_fasi_write_block (
		* struct i2c_device_addr *dev_addr, -- address of I2C device
		@@ -1705,7 +1705,7 @@ static int drxdap_fasi_write_block(struct i2c_device_addr *dev_addr,
		return first_err;
		}

		/******************************
		/*****************************
		*
		* int drxdap_fasi_write_reg16 (
		* struct i2c_device_addr *dev_addr, -- address of I2C device
		@@ -1734,7 +1734,7 @@ static int drxdap_fasi_write_reg16(struct i2c_device_addr *dev_addr,
		return drxdap_fasi_write_block(dev_addr, addr, sizeof(data), buf, flags);
		}

		/******************************
		/*****************************
		*
		* int drxdap_fasi_read_modify_write_reg16 (
		* struct i2c_device_addr *dev_addr, -- address of I2C device
		@@ -1778,7 +1778,7 @@ static int drxdap_fasi_read_modify_write_reg16(struct i2c_device_addr *dev_addr,
		return rc;
		}

		/******************************
		/*****************************
		*
		* int drxdap_fasi_write_reg32 (
		* struct i2c_device_addr *dev_addr, -- address of I2C device
		@@ -1811,7 +1811,7 @@ static int drxdap_fasi_write_reg32(struct i2c_device_addr *dev_addr,

		/============================================================================/

		/**
		/*
		* \fn int drxj_dap_rm_write_reg16short
		* \brief Read modify write 16 bits audio register using short format only.
		* \param dev_addr
		@@ -1890,7 +1890,7 @@ static int drxj_dap_read_modify_write_reg16(struct i2c_device_addr *dev_addr,

		/============================================================================/

		/**
		/*
		* \fn int drxj_dap_read_aud_reg16
		* \brief Read 16 bits audio register
		* \param dev_addr
		@@ -1997,7 +1997,7 @@ static int drxj_dap_read_reg16(struct i2c_device_addr *dev_addr,
		}
		/============================================================================/

		/**
		/*
		* \fn int drxj_dap_write_aud_reg16
		* \brief Write 16 bits audio register
		* \param dev_addr
		@@ -2086,7 +2086,7 @@ static int drxj_dap_write_reg16(struct i2c_device_addr *dev_addr,
		#define DRXJ_HI_ATOMIC_READ SIO_HI_RA_RAM_PAR_3_ACP_RW_READ
		#define DRXJ_HI_ATOMIC_WRITE SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE

		/**
		/*
		* \fn int drxj_dap_atomic_read_write_block()
		* \brief Basic access routine for atomic read or write access
		* \param dev_addr pointer to i2c dev address
		@@ -2168,7 +2168,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int drxj_dap_atomic_read_reg32()
		* \brief Atomic read of 32 bits words
		*/
		@@ -2215,7 +2215,7 @@ int drxj_dap_atomic_read_reg32(struct i2c_device_addr *dev_addr,
		/============================================================================/
		/============================================================================/

		/**
		/*
		* \fn int hi_cfg_command()
		* \brief Configure HI with settings stored in the demod structure.
		* \param demod Demodulator.
		@@ -2258,7 +2258,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int hi_command()
		* \brief Configure HI with settings stored in the demod structure.
		* \param dev_addr I2C address.
		@@ -2369,7 +2369,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int init_hi( const struct drx_demod_instance *demod )
		* \brief Initialise and configurate HI.
		* \param demod pointer to demod data.
		@@ -2450,7 +2450,7 @@ rw_error:
		/============================================================================/
		/============================================================================/

		/**
		/*
		* \fn int get_device_capabilities()
		* \brief Get and store device capabilities.
		* \param demod Pointer to demodulator instance.
		@@ -2656,7 +2656,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int power_up_device()
		* \brief Power up device.
		* \param demod Pointer to demodulator instance.
		@@ -2710,7 +2710,7 @@ static int power_up_device(struct drx_demod_instance *demod)
		/----------------------------------------------------------------------------/
		/* MPEG Output Configuration Functions - begin */
		/----------------------------------------------------------------------------/
		/**
		/*
		* \fn int ctrl_set_cfg_mpeg_output()
		* \brief Set MPEG output configuration of the device.
		* \param devmod Pointer to demodulator instance.
		@@ -3356,7 +3356,7 @@ rw_error:
		/* miscellaneous configurations - begin */
		/----------------------------------------------------------------------------/

		/**
		/*
		* \fn int set_mpegtei_handling()
		* \brief Activate MPEG TEI handling settings.
		* \param devmod Pointer to demodulator instance.
		@@ -3429,7 +3429,7 @@ rw_error:
		}

		/----------------------------------------------------------------------------/
		/**
		/*
		* \fn int bit_reverse_mpeg_output()
		* \brief Set MPEG output bit-endian settings.
		* \param devmod Pointer to demodulator instance.
		@@ -3472,7 +3472,7 @@ rw_error:
		}

		/----------------------------------------------------------------------------/
		/**
		/*
		* \fn int set_mpeg_start_width()
		* \brief Set MPEG start width.
		* \param devmod Pointer to demodulator instance.
		@@ -3522,7 +3522,7 @@ rw_error:
		/----------------------------------------------------------------------------/
		/* UIO Configuration Functions - begin */
		/----------------------------------------------------------------------------/
		/**
		/*
		* \fn int ctrl_set_uio_cfg()
		* \brief Configure modus oprandi UIO.
		* \param demod Pointer to demodulator instance.
		@@ -3659,7 +3659,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int ctrl_uio_write()
		* \brief Write to a UIO.
		* \param demod Pointer to demodulator instance.
		@@ -3868,7 +3868,7 @@ rw_error:
		/----------------------------------------------------------------------------/
		/* I2C Bridge Functions - begin */
		/----------------------------------------------------------------------------/
		/**
		/*
		* \fn int ctrl_i2c_bridge()
		* \brief Open or close the I2C switch to tuner.
		* \param demod Pointer to demodulator instance.
		@@ -3903,7 +3903,7 @@ ctrl_i2c_bridge(struct drx_demod_instance demod, bool bridge_closed)
		/----------------------------------------------------------------------------/
		/* Smart antenna Functions - begin */
		/----------------------------------------------------------------------------/
		/**
		/*
		* \fn int smart_ant_init()
		* \brief Initialize Smart Antenna.
		* \param pointer to struct drx_demod_instance.
		@@ -4116,7 +4116,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int DRXJ_DAP_SCUAtomicReadWriteBlock()
		* \brief Basic access routine for SCU atomic read or write access
		* \param dev_addr pointer to i2c dev address
		@@ -4188,7 +4188,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int DRXJ_DAP_AtomicReadReg16()
		* \brief Atomic read of 16 bits words
		*/
		@@ -4216,7 +4216,7 @@ int drxj_dap_scu_atomic_read_reg16(struct i2c_device_addr *dev_addr,
		}

		/============================================================================/
		/**
		/*
		* \fn int drxj_dap_scu_atomic_write_reg16()
		* \brief Atomic read of 16 bits words
		*/
		@@ -4237,7 +4237,7 @@ int drxj_dap_scu_atomic_write_reg16(struct i2c_device_addr *dev_addr,
		}

		/* -------------------------------------------------------------------------- */
		/**
		/*
		* \brief Measure result of ADC synchronisation
		* \param demod demod instance
		* \param count (returned) count
		@@ -4297,7 +4297,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \brief Synchronize analog and digital clock domains
		* \param demod demod instance
		* \return int.
		@@ -4365,7 +4365,7 @@ rw_error:
		/== 8VSB & QAM COMMON DATAPATH FUNCTIONS ==/
		/============================================================================/
		/============================================================================/
		/**
		/*
		* \fn int init_agc ()
		* \brief Initialize AGC for all standards.
		* \param demod instance of demodulator.
		@@ -4741,7 +4741,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int set_frequency ()
		* \brief Set frequency shift.
		* \param demod instance of demodulator.
		@@ -4839,7 +4839,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int get_acc_pkt_err()
		* \brief Retrieve signal strength for VSB and QAM.
		* \param demod Pointer to demod instance
		@@ -4891,7 +4891,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int set_agc_rf ()
		* \brief Configure RF AGC
		* \param demod instance of demodulator.
		@@ -5105,7 +5105,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int set_agc_if ()
		* \brief Configure If AGC
		* \param demod instance of demodulator.
		@@ -5334,7 +5334,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int set_iqm_af ()
		* \brief Configure IQM AF registers
		* \param demod instance of demodulator.
		@@ -5380,7 +5380,7 @@ rw_error:
		/============================================================================/
		/============================================================================/

		/**
		/*
		* \fn int power_down_vsb ()
		* \brief Powr down QAM related blocks.
		* \param demod instance of demodulator.
		@@ -5478,7 +5478,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int set_vsb_leak_n_gain ()
		* \brief Set ATSC demod.
		* \param demod instance of demodulator.
		@@ -5694,7 +5694,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int set_vsb()
		* \brief Set 8VSB demod.
		* \param demod instance of demodulator.
		@@ -6200,7 +6200,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn static short get_vsb_post_rs_pck_err(struct i2c_device_addr dev_addr, u16 PckErrs)
		* \brief Get the values of packet error in 8VSB mode
		* \return Error code
		@@ -6239,7 +6239,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn static short GetVSBBer(struct i2c_device_addr dev_addr, u32 ber)
		* \brief Get the values of ber in VSB mode
		* \return Error code
		@@ -6284,7 +6284,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn static short get_vs_bpre_viterbi_ber(struct i2c_device_addr dev_addr, u32 ber)
		* \brief Get the values of ber in VSB mode
		* \return Error code
		@@ -6306,7 +6306,7 @@ static int get_vs_bpre_viterbi_ber(struct i2c_device_addr *dev_addr,
		return 0;
		}

		/**
		/*
		* \fn static int get_vsbmer(struct i2c_device_addr dev_addr, u16 mer)
		* \brief Get the values of MER
		* \return Error code
		@@ -6340,7 +6340,7 @@ rw_error:
		/============================================================================/
		/============================================================================/

		/**
		/*
		* \fn int power_down_qam ()
		* \brief Powr down QAM related blocks.
		* \param demod instance of demodulator.
		@@ -6444,7 +6444,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int set_qam_measurement ()
		* \brief Setup of the QAM Measuremnt intervals for signal quality
		* \param demod instance of demod.
		@@ -6656,7 +6656,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int set_qam16 ()
		* \brief QAM16 specific setup
		* \param demod instance of demod.
		@@ -6891,7 +6891,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int set_qam32 ()
		* \brief QAM32 specific setup
		* \param demod instance of demod.
		@@ -7126,7 +7126,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int set_qam64 ()
		* \brief QAM64 specific setup
		* \param demod instance of demod.
		@@ -7362,7 +7362,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int set_qam128 ()
		* \brief QAM128 specific setup
		* \param demod: instance of demod.
		@@ -7597,7 +7597,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int set_qam256 ()
		* \brief QAM256 specific setup
		* \param demod: instance of demod.
		@@ -7835,7 +7835,7 @@ rw_error:
		#define QAM_SET_OP_CONSTELLATION 0x2
		#define QAM_SET_OP_SPECTRUM 0X4

		/**
		/*
		* \fn int set_qam ()
		* \brief Set QAM demod.
		* \param demod: instance of demod.
		@@ -8845,7 +8845,7 @@ rw_error:
		#define DEMOD_LOCKED 0x1
		#define SYNC_FLIPPED 0x2
		#define SPEC_MIRRORED 0x4
		/**
		/*
		* \fn int qam64auto ()
		* \brief auto do sync pattern switching and mirroring.
		* \param demod: instance of demod.
		@@ -8993,7 +8993,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int qam256auto ()
		* \brief auto do sync pattern switching and mirroring.
		* \param demod: instance of demod.
		@@ -9077,7 +9077,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int set_qam_channel ()
		* \brief Set QAM channel according to the requested constellation.
		* \param demod: instance of demod.
		@@ -9284,7 +9284,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn static short get_qamrs_err_count(struct i2c_device_addr *dev_addr)
		* \brief Get RS error count in QAM mode (used for post RS BER calculation)
		* \return Error code
		@@ -9355,7 +9355,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int get_sig_strength()
		* \brief Retrieve signal strength for VSB and QAM.
		* \param demod Pointer to demod instance
		@@ -9435,7 +9435,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int ctrl_get_qam_sig_quality()
		* \brief Retrieve QAM signal quality from device.
		* \param devmod Pointer to demodulator instance.
		@@ -9721,7 +9721,7 @@ rw_error:
		*/
		/* -------------------------------------------------------------------------- */

		/**
		/*
		* \fn int power_down_atv ()
		* \brief Power down ATV.
		* \param demod instance of demodulator
		@@ -9822,7 +9822,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \brief Power up AUD.
		* \param demod instance of demodulator
		* \return int.
		@@ -9850,7 +9850,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int set_orx_nsu_aox()
		* \brief Configure OrxNsuAox for OOB
		* \param demod instance of demodulator.
		@@ -9884,7 +9884,7 @@ rw_error:
		return rc;
		}

		/**
		/*
		* \fn int ctrl_set_oob()
		* \brief Set OOB channel to be used.
		* \param demod instance of demodulator
		@@ -9986,9 +9986,9 @@ static int ctrl_set_oob(struct drx_demod_instance demod, struct drxoob oob_par
		20;
		}

		/*********/
		/********/
		/* Stop */
		/*********/
		/********/
		rc = drxj_dap_write_reg16(dev_addr, ORX_COMM_EXEC__A, ORX_COMM_EXEC_STOP, 0);
		if (rc != 0) {
		pr_err("error %d\n", rc);
		@@ -10004,9 +10004,9 @@ static int ctrl_set_oob(struct drx_demod_instance demod, struct drxoob oob_par
		pr_err("error %d\n", rc);
		goto rw_error;
		}
		/*********/
		/********/
		/* Reset */
		/*********/
		/********/
		scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB
		\| SCU_RAM_COMMAND_CMD_DEMOD_RESET;
		scu_cmd.parameter_len = 0;
		@@ -10017,9 +10017,9 @@ static int ctrl_set_oob(struct drx_demod_instance demod, struct drxoob oob_par
		pr_err("error %d\n", rc);
		goto rw_error;
		}
		/***********/
		/**********/
		/* SET_ENV */
		/***********/
		/**********/
		/* set frequency, spectrum inversion and data rate */
		scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB
		\| SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV;
		@@ -10376,9 +10376,9 @@ static int ctrl_set_oob(struct drx_demod_instance demod, struct drxoob oob_par
		pr_err("error %d\n", rc);
		goto rw_error;
		}
		/*********/
		/********/
		/* Start */
		/*********/
		/********/
		scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB
		\| SCU_RAM_COMMAND_CMD_DEMOD_START;
		scu_cmd.parameter_len = 0;
		@@ -10419,7 +10419,7 @@ rw_error:
		/*=============================================================================
		===== ctrl_set_channel() ==========================================================
		===========================================================================*/
		/**
		/*
		* \fn int ctrl_set_channel()
		* \brief Select a new transmission channel.
		* \param demod instance of demod.
		@@ -10652,7 +10652,7 @@ rw_error:
		===== SigQuality() ==========================================================
		===========================================================================*/

		/**
		/*
		* \fn int ctrl_sig_quality()
		* \brief Retrieve signal quality form device.
		* \param devmod Pointer to demodulator instance.
		@@ -10768,7 +10768,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int ctrl_lock_status()
		* \brief Retrieve lock status .
		* \param dev_addr Pointer to demodulator device address.
		@@ -10856,7 +10856,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int ctrl_set_standard()
		* \brief Set modulation standard to be used.
		* \param standard Modulation standard.
		@@ -11012,7 +11012,7 @@ static void drxj_reset_mode(struct drxj_data *ext_attr)
		ext_attr->vsb_pre_saw_cfg.use_pre_saw = true;
		}

		/**
		/*
		* \fn int ctrl_power_mode()
		* \brief Set the power mode of the device to the specified power mode
		* \param demod Pointer to demodulator instance.
		@@ -11171,7 +11171,7 @@ rw_error:
		/== CTRL Set/Get Config related functions ===================================/
		/============================================================================/

		/**
		/*
		* \fn int ctrl_set_cfg_pre_saw()
		* \brief Set Pre-saw reference.
		* \param demod demod instance
		@@ -11234,7 +11234,7 @@ rw_error:

		/============================================================================/

		/**
		/*
		* \fn int ctrl_set_cfg_afe_gain()
		* \brief Set AFE Gain.
		* \param demod demod instance
		@@ -11324,7 +11324,7 @@ static int drx_ctrl_u_code(struct drx_demod_instance *demod,
		enum drxu_code_action action);
		static int drxj_set_lna_state(struct drx_demod_instance *demod, bool state);

		/**
		/*
		* \fn drxj_open()
		* \brief Open the demod instance, configure device, configure drxdriver
		* \return Status_t Return status.
		@@ -11543,7 +11543,7 @@ rw_error:
		}

		/============================================================================/
		/**
		/*
		* \fn drxj_close()
		* \brief Close the demod instance, power down the device
		* \return Status_t Return status.
		@@ -11594,7 +11594,7 @@ rw_error:
		* Microcode related functions
		*/

		/**
		/*
		* drx_u_code_compute_crc - Compute CRC of block of microcode data.
		* @block_data: Pointer to microcode data.
		* @nr_words: Size of microcode block (number of 16 bits words).
		@@ -11622,7 +11622,7 @@ static u16 drx_u_code_compute_crc(u8 *block_data, u16 nr_words)
		return (u16)(crc_word >> 16);
		}

		/**
		/*
		* drx_check_firmware - checks if the loaded firmware is valid
		*
		* @demod: demod structure
		@@ -11708,7 +11708,7 @@ eof:
		return -EINVAL;
		}

		/**
		/*
		* drx_ctrl_u_code - Handle microcode upload or verify.
		* @dev_addr: Address of device.
		* @mc_info: Pointer to information about microcode data.

drivers/media/dvb-frontends/drxk_hard.c

+16 −16

File changed.

Preview size limit exceeded, changes collapsed.

Admin message