Commit 3407fc37 authored by Quinn Tran's avatar Quinn Tran Committed by Martin K. Petersen
Browse files

scsi: qla2xxx: Use chip reset to bring down laser on unload. 



Current code uses Stop Firmware MB cmd to stop the chip before
driver unload.  This will leave the laser in its current state.
This give the illusion of this adapter is still alive.
For 8G & newer adapters, use chip reset to stop the chip and
bring down the laser.

Signed-off-by: default avatarQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: default avatarHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 2853192e

drivers/scsi/qla2xxx/qla_os.c

+17 −35
Original line number Diff line number Diff line
@@ -294,7 +294,6 @@ static int qla2xxx_eh_host_reset(struct scsi_cmnd *); 


static void qla2x00_clear_drv_active(struct qla_hw_data *);

static void qla2x00_free_device(scsi_qla_host_t *);

static void qla83xx_disable_laser(scsi_qla_host_t *vha);

static int qla2xxx_map_queues(struct Scsi_Host *shost);

static void qla2x00_destroy_deferred_work(struct qla_hw_data *);
@@ -3449,8 +3448,13 @@ qla2x00_shutdown(struct pci_dev *pdev) 
	if (ha->eft)

		qla2x00_disable_eft_trace(vha);



	if (IS_QLA25XX(ha) ||  IS_QLA2031(ha) || IS_QLA27XX(ha)) {

		if (ha->flags.fw_started)

			qla2x00_abort_isp_cleanup(vha);

	} else {

		/* Stop currently executing firmware. */

		qla2x00_try_to_stop_firmware(vha);

	}



	/* Turn adapter off line */

	vha->flags.online = 0;
@@ -3629,10 +3633,6 @@ qla2x00_remove_one(struct pci_dev *pdev) 


	qla84xx_put_chip(base_vha);



	/* Laser should be disabled only for ISP2031 */

	if (IS_QLA2031(ha))

		qla83xx_disable_laser(base_vha);



	/* Disable timer */

	if (base_vha->timer_active)

		qla2x00_stop_timer(base_vha);
@@ -3693,8 +3693,16 @@ qla2x00_free_device(scsi_qla_host_t *vha) 
	if (ha->eft)

		qla2x00_disable_eft_trace(vha);



	if (IS_QLA25XX(ha) ||  IS_QLA2031(ha) || IS_QLA27XX(ha)) {

		if (ha->flags.fw_started)

			qla2x00_abort_isp_cleanup(vha);

	} else {

		if (ha->flags.fw_started) {

			/* Stop currently executing firmware. */

			qla2x00_try_to_stop_firmware(vha);

			ha->flags.fw_started = 0;

		}

	}



	vha->flags.online = 0;
@@ -6617,32 +6625,6 @@ qla2xxx_pci_resume(struct pci_dev *pdev) 
	ha->flags.eeh_busy = 0;

}



static void

qla83xx_disable_laser(scsi_qla_host_t *vha)

{

	uint32_t reg, data, fn;

	struct qla_hw_data *ha = vha->hw;

	struct device_reg_24xx __iomem *isp_reg = &ha->iobase->isp24;



	/* pci func #/port # */

	ql_dbg(ql_dbg_init, vha, 0x004b,

	    "Disabling Laser for hba: %p\n", vha);



	fn = (RD_REG_DWORD(&isp_reg->ctrl_status) &

		(BIT_15|BIT_14|BIT_13|BIT_12));



	fn = (fn >> 12);



	if (fn & 1)

		reg = PORT_1_2031;

	else

		reg = PORT_0_2031;



	data = LASER_OFF_2031;



	qla83xx_wr_reg(vha, reg, data);

}



static int qla2xxx_map_queues(struct Scsi_Host *shost)

{

	int rc;

CRA Git | Maintained and supported by SUSTech CRA and CCSE