Commit 33626377 authored by Hans de Goede's avatar Hans de Goede Committed by Maxime Ripard
Browse files

ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tablet 



The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen,
microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors.

It uses a rtl8188cus usb wifi chip and a RDA 5875Y bluetooth chip attached
to uart2. It has a bma250 accelerometer attached to i2c1 addr 0x18, this
only works when ldo3 is set to 2.8 volt, otherwise i2c1 gets stuck, so
for now we mark i2c1 as failed.

It has a pixcir,pixcir_tangoc compatible touchscreen attached to i2c2 addr
0x5c. This is not enabled in this dts, because this variant of the
pixcir_tangoc has separate wakeup and enable pins both of which need
to be driven low before the touchscreen will work. Before we can enable
this the pixcir driver and devicetree-bindings need to be extended to
support these pins.

Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 39efe82a

arch/arm/boot/dts/Makefile

+2 −1
Original line number Diff line number Diff line
@@ -588,7 +588,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \ 
	sun4i-a10-mk802ii.dtb \

	sun4i-a10-olinuxino-lime.dtb \

	sun4i-a10-pcduino.dtb \

	sun4i-a10-pcduino2.dtb

	sun4i-a10-pcduino2.dtb \

	sun4i-a10-pov-protab2-ips9.dtb

dtb-$(CONFIG_MACH_SUN5I) += \

	sun5i-a10s-auxtek-t003.dtb \

	sun5i-a10s-auxtek-t004.dtb \

arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts

0 → 100644
+199 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "sun4i-a10.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/pinctrl/sun4i-a10.h>



/ {

	model = "Point of View Protab2-IPS9";

	compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";



	aliases {

		serial0 = &uart0;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};

};



&cpu0 {

	cpu-supply = <&reg_dcdc2>;

};



&ehci0 {

	status = "okay";

};



&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";



	axp209: pmic@34 {

		reg = <0x34>;

		interrupts = <0>;

	};

};



#include "axp209.dtsi"



&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins_a>;

	/* pull-ups and devices require AXP209 LDO3 */

	status = "failed";

};



&i2c2 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins_a>;

	status = "okay";

};



&lradc {

	vref-supply = <&reg_ldo2>;

	status = "okay";



	button@400 {

		label = "Volume Up";

		linux,code = <KEY_VOLUMEUP>;

		channel = <0>;

		voltage = <400000>;

	};



	button@800 {

		label = "Volume Down";

		linux,code = <KEY_VOLUMEDOWN>;

		channel = <0>;

		voltage = <800000>;

	};

};



&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

	cd-inverted;

	status = "okay";

};



&otg_sram {

	status = "okay";

};



&pio {

	usb0_id_detect_pin: usb0_id_detect_pin@0 {

		allwinner,pins = "PH4";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};



	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {

		allwinner,pins = "PH5";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;

	};

};



&reg_dcdc2 {

	regulator-always-on;

	regulator-min-microvolt = <1000000>;

	regulator-max-microvolt = <1400000>;

	regulator-name = "vdd-cpu";

};



&reg_dcdc3 {

	regulator-always-on;

	regulator-min-microvolt = <1250000>;

	regulator-max-microvolt = <1250000>;

	regulator-name = "vdd-int-dll";

};



&reg_ldo1 {

	regulator-name = "vdd-rtc";

};



&reg_ldo2 {

	regulator-always-on;

	regulator-min-microvolt = <3000000>;

	regulator-max-microvolt = <3000000>;

	regulator-name = "avcc";

};



&reg_usb0_vbus {

	status = "okay";

};



&reg_usb1_vbus {

	status = "okay";

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};



&usb_otg {

	dr_mode = "otg";

	status = "okay";

};



&usbphy {

	pinctrl-names = "default";

	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;

	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */

	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */

	usb0_vbus-supply = <&reg_usb0_vbus>;

	usb1_vbus-supply = <&reg_usb1_vbus>;

	status = "okay";

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE