Commit 324bb707 authored by Linus Walleij's avatar Linus Walleij
Browse files

drm/panel: Add a driver for the TPO TPG110 



The TPO (Toppoly) TPG110 is a pretty generic display driver
similar in vein to the Ilitek 93xx devices. It is not a panel
per se but a driver used with several low-cost noname panels.

This is used on the Nomadik NHK15 combined with a OSD
OSD057VA01CT display for WVGA 800x480.

The driver is pretty minimalistic right now but can be
extended to handle non-default polarities, gamma correction
etc.

The driver is based on the baked-in code in
drivers/video/fbdev/amba-clcd-nomadik.c which will be
decomissioned once this us upstream.

Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
Acked-by: default avatarNoralf Trønnes <noralf@tronnes.org>
Acked-by: default avatarJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111175406.27646-1-linus.walleij@linaro.org
parent 890880dd

MAINTAINERS

+7 −0
Original line number Diff line number Diff line
@@ -4910,6 +4910,13 @@ DRM DRIVER FOR TDFX VIDEO CARDS 
S:	Orphan / Obsolete

F:	drivers/gpu/drm/tdfx/



DRM DRIVER FOR TPO TPG110 PANELS

M:	Linus Walleij <linus.walleij@linaro.org>

T:	git git://anongit.freedesktop.org/drm/drm-misc

S:	Maintained

F:	drivers/gpu/drm/panel/panel-tpo-tpg110.c

F:	Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt



DRM DRIVER FOR USB DISPLAYLINK VIDEO ADAPTERS

M:	Dave Airlie <airlied@redhat.com>

R:	Sean Paul <sean@poorly.run>

drivers/gpu/drm/panel/Kconfig

+9 −0
Original line number Diff line number Diff line
@@ -204,6 +204,15 @@ config DRM_PANEL_SITRONIX_ST7789V 
	  Say Y here if you want to enable support for the Sitronix

	  ST7789V controller for 240x320 LCD panels



config DRM_PANEL_TPO_TPG110

	tristate "TPO TPG 800x400 panel"

	depends on OF && SPI && GPIOLIB

	depends on BACKLIGHT_CLASS_DEVICE

	help

	  Say Y here if you want to enable support for TPO TPG110

	  400CH LTPS TFT LCD Single Chip Digital Driver for up to

	  800x400 LCD panels.



config DRM_PANEL_TRULY_NT35597_WQXGA

	tristate "Truly WQXGA"

	depends on OF

drivers/gpu/drm/panel/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -21,4 +21,5 @@ obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o 
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o

obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o

obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o

obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o

obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o

drivers/gpu/drm/panel/panel-tpo-tpg110.c

0 → 100644
+496 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * Panel driver for the TPO TPG110 400CH LTPS TFT LCD Single Chip

 * Digital Driver.

 *

 * This chip drives a TFT LCD, so it does not know what kind of

 * display is actually connected to it, so the width and height of that

 * display needs to be supplied from the machine configuration.

 *

 * Author:

 * Linus Walleij <linus.walleij@linaro.org>

 */

#include <drm/drm_modes.h>

#include <drm/drm_panel.h>

#include <drm/drm_print.h>



#include <linux/backlight.h>

#include <linux/bitops.h>

#include <linux/delay.h>

#include <linux/gpio/consumer.h>

#include <linux/init.h>

#include <linux/kernel.h>

#include <linux/module.h>

#include <linux/platform_device.h>

#include <linux/spi/spi.h>



#define TPG110_TEST			0x00

#define TPG110_CHIPID			0x01

#define TPG110_CTRL1			0x02

#define TPG110_RES_MASK			GENMASK(2, 0)

#define TPG110_RES_800X480		0x07

#define TPG110_RES_640X480		0x06

#define TPG110_RES_480X272		0x05

#define TPG110_RES_480X640		0x04

#define TPG110_RES_480X272_D		0x01 /* Dual scan: outputs 800x480 */

#define TPG110_RES_400X240_D		0x00 /* Dual scan: outputs 800x480 */

#define TPG110_CTRL2			0x03

#define TPG110_CTRL2_PM			BIT(0)

#define TPG110_CTRL2_RES_PM_CTRL	BIT(7)



/**

 * struct tpg110_panel_mode - lookup struct for the supported modes

 */

struct tpg110_panel_mode {

	/**

	 * @name: the name of this panel

	 */

	const char *name;

	/**

	 * @magic: the magic value from the detection register

	 */

	u32 magic;

	/**

	 * @mode: the DRM display mode for this panel

	 */

	struct drm_display_mode mode;

	/**

	 * @bus_flags: the DRM bus flags for this panel e.g. inverted clock

	 */

	u32 bus_flags;

};



/**

 * struct tpg110 - state container for the TPG110 panel

 */

struct tpg110 {

	/**

	 * @dev: the container device

	 */

	struct device *dev;

	/**

	 * @spi: the corresponding SPI device

	 */

	struct spi_device *spi;

	/**

	 * @panel: the DRM panel instance for this device

	 */

	struct drm_panel panel;

	/**

	 * @backlight: backlight for this panel

	 */

	struct backlight_device *backlight;

	/**

	 * @panel_type: the panel mode as detected

	 */

	const struct tpg110_panel_mode *panel_mode;

	/**

	 * @width: the width of this panel in mm

	 */

	u32 width;

	/**

	 * @height: the height of this panel in mm

	 */

	u32 height;

	/**

	 * @grestb: reset GPIO line

	 */

	struct gpio_desc *grestb;

};



/*

 * TPG110 modes, these are the simple modes, the dualscan modes that

 * take 400x240 or 480x272 in and display as 800x480 are not listed.

 */

static const struct tpg110_panel_mode tpg110_modes[] = {

	{

		.name = "800x480 RGB",

		.magic = TPG110_RES_800X480,

		.mode = {

			.clock = 33200,

			.hdisplay = 800,

			.hsync_start = 800 + 40,

			.hsync_end = 800 + 40 + 1,

			.htotal = 800 + 40 + 1 + 216,

			.vdisplay = 480,

			.vsync_start = 480 + 10,

			.vsync_end = 480 + 10 + 1,

			.vtotal = 480 + 10 + 1 + 35,

			.vrefresh = 60,

		},

		.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,

	},

	{

		.name = "640x480 RGB",

		.magic = TPG110_RES_640X480,

		.mode = {

			.clock = 25200,

			.hdisplay = 640,

			.hsync_start = 640 + 24,

			.hsync_end = 640 + 24 + 1,

			.htotal = 640 + 24 + 1 + 136,

			.vdisplay = 480,

			.vsync_start = 480 + 18,

			.vsync_end = 480 + 18 + 1,

			.vtotal = 480 + 18 + 1 + 27,

			.vrefresh = 60,

		},

		.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,

	},

	{

		.name = "480x272 RGB",

		.magic = TPG110_RES_480X272,

		.mode = {

			.clock = 9000,

			.hdisplay = 480,

			.hsync_start = 480 + 2,

			.hsync_end = 480 + 2 + 1,

			.htotal = 480 + 2 + 1 + 43,

			.vdisplay = 272,

			.vsync_start = 272 + 2,

			.vsync_end = 272 + 2 + 1,

			.vtotal = 272 + 2 + 1 + 12,

			.vrefresh = 60,

		},

		.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,

	},

	{

		.name = "480x640 RGB",

		.magic = TPG110_RES_480X640,

		.mode = {

			.clock = 20500,

			.hdisplay = 480,

			.hsync_start = 480 + 2,

			.hsync_end = 480 + 2 + 1,

			.htotal = 480 + 2 + 1 + 43,

			.vdisplay = 640,

			.vsync_start = 640 + 4,

			.vsync_end = 640 + 4 + 1,

			.vtotal = 640 + 4 + 1 + 8,

			.vrefresh = 60,

		},

		.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,

	},

	{

		.name = "400x240 RGB",

		.magic = TPG110_RES_400X240_D,

		.mode = {

			.clock = 8300,

			.hdisplay = 400,

			.hsync_start = 400 + 20,

			.hsync_end = 400 + 20 + 1,

			.htotal = 400 + 20 + 1 + 108,

			.vdisplay = 240,

			.vsync_start = 240 + 2,

			.vsync_end = 240 + 2 + 1,

			.vtotal = 240 + 2 + 1 + 20,

			.vrefresh = 60,

		},

		.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,

	},

};



static inline struct tpg110 *

to_tpg110(struct drm_panel *panel)

{

	return container_of(panel, struct tpg110, panel);

}



static u8 tpg110_readwrite_reg(struct tpg110 *tpg, bool write,

			       u8 address, u8 outval)

{

	struct spi_message m;

	struct spi_transfer t[2];

	u8 buf[2];

	int ret;



	spi_message_init(&m);

	memset(t, 0, sizeof(t));



	if (write) {

		/*

		 * Clear address bit 0, 1 when writing, just to be sure

		 * The actual bit indicating a write here is bit 1, bit

		 * 0 is just surplus to pad it up to 8 bits.

		 */

		buf[0] = address << 2;

		buf[0] &= ~0x03;

		buf[1] = outval;



		t[0].bits_per_word = 8;

		t[0].tx_buf = &buf[0];

		t[0].len = 1;



		t[1].tx_buf = &buf[1];

		t[1].len = 1;

		t[1].bits_per_word = 8;

	} else {

		/* Set address bit 0 to 1 to read */

		buf[0] = address << 1;

		buf[0] |= 0x01;



		/*

		 * The last bit/clock is Hi-Z turnaround cycle, so we need

		 * to send only 7 bits here. The 8th bit is the high impedance

		 * turn-around cycle.

		 */

		t[0].bits_per_word = 7;

		t[0].tx_buf = &buf[0];

		t[0].len = 1;



		t[1].rx_buf = &buf[1];

		t[1].len = 1;

		t[1].bits_per_word = 8;

	}



	spi_message_add_tail(&t[0], &m);

	spi_message_add_tail(&t[1], &m);

	ret = spi_sync(tpg->spi, &m);

	if (ret) {

		DRM_DEV_ERROR(tpg->dev, "SPI message error %d\n", ret);

		return ret;

	}

	if (write)

		return 0;

	/* Read */

	return buf[1];

}



static u8 tpg110_read_reg(struct tpg110 *tpg, u8 address)

{

	return tpg110_readwrite_reg(tpg, false, address, 0);

}



static void tpg110_write_reg(struct tpg110 *tpg, u8 address, u8 outval)

{

	tpg110_readwrite_reg(tpg, true, address, outval);

}



static int tpg110_startup(struct tpg110 *tpg)

{

	u8 val;

	int i;



	/* De-assert the reset signal */

	gpiod_set_value_cansleep(tpg->grestb, 0);

	usleep_range(1000, 2000);

	DRM_DEV_DEBUG(tpg->dev, "de-asserted GRESTB\n");



	/* Test display communication */

	tpg110_write_reg(tpg, TPG110_TEST, 0x55);

	val = tpg110_read_reg(tpg, TPG110_TEST);

	if (val != 0x55) {

		DRM_DEV_ERROR(tpg->dev, "failed communication test\n");

		return -ENODEV;

	}



	val = tpg110_read_reg(tpg, TPG110_CHIPID);

	DRM_DEV_INFO(tpg->dev, "TPG110 chip ID: %d version: %d\n",

		 val >> 4, val & 0x0f);



	/* Show display resolution */

	val = tpg110_read_reg(tpg, TPG110_CTRL1);

	val &= TPG110_RES_MASK;

	switch (val) {

	case TPG110_RES_400X240_D:

		DRM_DEV_INFO(tpg->dev,

			 "IN 400x240 RGB -> OUT 800x480 RGB (dual scan)\n");

		break;

	case TPG110_RES_480X272_D:

		DRM_DEV_INFO(tpg->dev,

			 "IN 480x272 RGB -> OUT 800x480 RGB (dual scan)\n");

		break;

	case TPG110_RES_480X640:

		DRM_DEV_INFO(tpg->dev, "480x640 RGB\n");

		break;

	case TPG110_RES_480X272:

		DRM_DEV_INFO(tpg->dev, "480x272 RGB\n");

		break;

	case TPG110_RES_640X480:

		DRM_DEV_INFO(tpg->dev, "640x480 RGB\n");

		break;

	case TPG110_RES_800X480:

		DRM_DEV_INFO(tpg->dev, "800x480 RGB\n");

		break;

	default:

		DRM_DEV_ERROR(tpg->dev, "ILLEGAL RESOLUTION 0x%02x\n", val);

		break;

	}



	/* From the producer side, this is the same resolution */

	if (val == TPG110_RES_480X272_D)

		val = TPG110_RES_480X272;



	for (i = 0; i < ARRAY_SIZE(tpg110_modes); i++) {

		const struct tpg110_panel_mode *pm;



		pm = &tpg110_modes[i];

		if (pm->magic == val) {

			tpg->panel_mode = pm;

			break;

		}

	}

	if (i == ARRAY_SIZE(tpg110_modes)) {

		DRM_DEV_ERROR(tpg->dev, "unsupported mode (%02x) detected\n",

			val);

		return -ENODEV;

	}



	val = tpg110_read_reg(tpg, TPG110_CTRL2);

	DRM_DEV_INFO(tpg->dev, "resolution and standby is controlled by %s\n",

		 (val & TPG110_CTRL2_RES_PM_CTRL) ? "software" : "hardware");

	/* Take control over resolution and standby */

	val |= TPG110_CTRL2_RES_PM_CTRL;

	tpg110_write_reg(tpg, TPG110_CTRL2, val);



	return 0;

}



static int tpg110_disable(struct drm_panel *panel)

{

	struct tpg110 *tpg = to_tpg110(panel);

	u8 val;



	/* Put chip into standby */

	val = tpg110_read_reg(tpg, TPG110_CTRL2_PM);

	val &= ~TPG110_CTRL2_PM;

	tpg110_write_reg(tpg, TPG110_CTRL2_PM, val);



	backlight_disable(tpg->backlight);



	return 0;

}



static int tpg110_enable(struct drm_panel *panel)

{

	struct tpg110 *tpg = to_tpg110(panel);

	u8 val;



	backlight_enable(tpg->backlight);



	/* Take chip out of standby */

	val = tpg110_read_reg(tpg, TPG110_CTRL2_PM);

	val |= TPG110_CTRL2_PM;

	tpg110_write_reg(tpg, TPG110_CTRL2_PM, val);



	return 0;

}



/**

 * tpg110_get_modes() - return the appropriate mode

 * @panel: the panel to get the mode for

 *

 * This currently does not present a forest of modes, instead it

 * presents the mode that is configured for the system under use,

 * and which is detected by reading the registers of the display.

 */

static int tpg110_get_modes(struct drm_panel *panel)

{

	struct drm_connector *connector = panel->connector;

	struct tpg110 *tpg = to_tpg110(panel);

	struct drm_display_mode *mode;



	strncpy(connector->display_info.name, tpg->panel_mode->name,

		DRM_DISPLAY_INFO_LEN);

	connector->display_info.width_mm = tpg->width;

	connector->display_info.height_mm = tpg->height;

	connector->display_info.bus_flags = tpg->panel_mode->bus_flags;



	mode = drm_mode_duplicate(panel->drm, &tpg->panel_mode->mode);

	drm_mode_set_name(mode);

	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;



	mode->width_mm = tpg->width;

	mode->height_mm = tpg->height;



	drm_mode_probed_add(connector, mode);



	return 1;

}



static const struct drm_panel_funcs tpg110_drm_funcs = {

	.disable = tpg110_disable,

	.enable = tpg110_enable,

	.get_modes = tpg110_get_modes,

};



static int tpg110_probe(struct spi_device *spi)

{

	struct device *dev = &spi->dev;

	struct device_node *np = dev->of_node;

	struct tpg110 *tpg;

	int ret;



	tpg = devm_kzalloc(dev, sizeof(*tpg), GFP_KERNEL);

	if (!tpg)

		return -ENOMEM;

	tpg->dev = dev;



	/* We get the physical display dimensions from the DT */

	ret = of_property_read_u32(np, "width-mm", &tpg->width);

	if (ret)

		DRM_DEV_ERROR(dev, "no panel width specified\n");

	ret = of_property_read_u32(np, "height-mm", &tpg->height);

	if (ret)

		DRM_DEV_ERROR(dev, "no panel height specified\n");



	/* Look for some optional backlight */

	tpg->backlight = devm_of_find_backlight(dev);

	if (IS_ERR(tpg->backlight))

		return PTR_ERR(tpg->backlight);



	/* This asserts the GRESTB signal, putting the display into reset */

	tpg->grestb = devm_gpiod_get(dev, "grestb", GPIOD_OUT_HIGH);

	if (IS_ERR(tpg->grestb)) {

		DRM_DEV_ERROR(dev, "no GRESTB GPIO\n");

		return -ENODEV;

	}



	spi->bits_per_word = 8;

	spi->mode |= SPI_3WIRE_HIZ;

	ret = spi_setup(spi);

	if (ret < 0) {

		DRM_DEV_ERROR(dev, "spi setup failed.\n");

		return ret;

	}

	tpg->spi = spi;



	ret = tpg110_startup(tpg);

	if (ret)

		return ret;



	drm_panel_init(&tpg->panel);

	tpg->panel.dev = dev;

	tpg->panel.funcs = &tpg110_drm_funcs;

	spi_set_drvdata(spi, tpg);



	return drm_panel_add(&tpg->panel);

}



static int tpg110_remove(struct spi_device *spi)

{

	struct tpg110 *tpg = spi_get_drvdata(spi);



	drm_panel_remove(&tpg->panel);

	return 0;

}



static const struct of_device_id tpg110_match[] = {

	{ .compatible = "tpo,tpg110", },

	{},

};

MODULE_DEVICE_TABLE(of, tpg110_match);



static struct spi_driver tpg110_driver = {

	.probe		= tpg110_probe,

	.remove		= tpg110_remove,

	.driver		= {

		.name	= "tpo-tpg110-panel",

		.of_match_table = tpg110_match,

	},

};

module_spi_driver(tpg110_driver);



MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");

MODULE_DESCRIPTION("TPO TPG110 panel driver");

MODULE_LICENSE("GPL v2");

CRA Git | Maintained and supported by SUSTech CRA and CCSE