i.MX31: Add ethernet support to i.MX31 Litekit board. (3211705f) · Commits · 戴 / test

arch/arm/mach-mx3/mx31lite.c

+39 −0

Original line number	Diff line number	Diff line
		@@ -22,6 +22,9 @@
		#include <linux/init.h>
		#include <linux/kernel.h>
		#include <linux/memory.h>
		#include <linux/platform_device.h>
		#include <linux/gpio.h>
		#include <linux/smsc911x.h>

		#include <mach/hardware.h>
		#include <asm/mach-types.h>
		@@ -34,6 +37,7 @@
		#include <mach/board-mx31lite.h>
		#include <mach/imx-uart.h>
		#include <mach/iomux-mx3.h>
		#include <mach/irqs.h>
		#include "devices.h"

		/*
		@@ -46,12 +50,43 @@ static unsigned int mx31lite_pins[] = {
		MX31_PIN_RTS1__RTS1,
		MX31_PIN_TXD1__TXD1,
		MX31_PIN_RXD1__RXD1,
		/* LAN9117 IRQ pin */
		IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
		};

		static struct imxuart_platform_data uart_pdata = {
		.flags = IMXUART_HAVE_RTSCTS,
		};

		static struct smsc911x_platform_config smsc911x_config = {
		.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
		.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
		.flags = SMSC911X_USE_16BIT,
		};

		static struct resource smsc911x_resources[] = {
		[0] = {
		.start = CS4_BASE_ADDR,
		.end = CS4_BASE_ADDR + 0x100,
		.flags = IORESOURCE_MEM,
		},
		[1] = {
		.start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
		.end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
		.flags = IORESOURCE_IRQ,
		},
		};

		static struct platform_device smsc911x_device = {
		.name = "smsc911x",
		.id = -1,
		.num_resources = ARRAY_SIZE(smsc911x_resources),
		.resource = smsc911x_resources,
		.dev = {
		.platform_data = &smsc911x_config,
		},
		};

		/*
		* This structure defines the MX31 memory map.
		*/
		@@ -87,6 +122,10 @@ static void __init mxc_board_init(void)
		"mx31lite");

		mxc_register_device(&mxc_uart_device0, &uart_pdata);

		/* SMSC9117 IRQ pin */
		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
		platform_device_register(&smsc911x_device);
		}

		static void __init mx31lite_timer_init(void)

Admin message