Commit 30ee809e authored by Xiaolei Li's avatar Xiaolei Li Committed by Boris Brezillon
Browse files

mtd: nand: mediatek: add support for MT2712 NAND FLASH Controller 



MT2712 NAND FLASH Controller is similar to MT2701 except those following:
(1) MT2712 supports up to 148B spare size per 1KB size sector (the same
    with 74B spare size per 512B size sector). There are three new spare
    format: 61, 67, 74.
(2) MT2712 supports up to 80 bit ecc strength. There are three new ecc
    strength level: 68, 72, 80.
(3) MT2712 ECC encode parity data register's start offset is 0x300, and
    different with 0x10 of MT2701.
(4) MT2712 improves ecc irq function. When ECC works in ECC_NFI_MODE,
    MT2701 will generate ecc irq number the same with ecc steps during
    page read. However, MT2712 can only generate one ecc irq.

Changes of this patch are:
(1) add two new variables named pg_irq_sel, encode_parity_reg0 in struct
    mtk_ecc_caps.
(2) add new bitfield ECC_PG_IRQ_SEL for register ECC_IRQ_REG.
(3) add ecc strength array of mt2712.
(4) add spare size array of mt2712.
(5) add mt2712 nfc and ecc device compatiable and data.

Signed-off-by: default avatarXiaolei Li <xiaolei.li@mediatek.com>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
parent 7ec4a37c

drivers/mtd/nand/mtk_ecc.c

+35 −4
Original line number Diff line number Diff line
@@ -28,6 +28,7 @@ 


#define ECC_IDLE_MASK		BIT(0)

#define ECC_IRQ_EN		BIT(0)

#define ECC_PG_IRQ_SEL		BIT(1)

#define ECC_OP_ENABLE		(1)

#define ECC_OP_DISABLE		(0)
@@ -37,7 +38,6 @@ 
#define		ECC_MS_SHIFT		(16)

#define ECC_ENCDIADDR		(0x08)

#define ECC_ENCIDLE		(0x0C)

#define ECC_ENCPAR(x)		(0x10 + (x) * sizeof(u32))

#define ECC_ENCIRQ_EN		(0x80)

#define ECC_ENCIRQ_STA		(0x84)

#define ECC_DECCON		(0x100)
@@ -61,6 +61,8 @@ struct mtk_ecc_caps { 
	u32 err_mask;

	const u8 *ecc_strength;

	u8 num_ecc_strength;

	u32 encode_parity_reg0;

	int pg_irq_sel;

};



struct mtk_ecc {
@@ -76,12 +78,17 @@ struct mtk_ecc { 
	u8 *eccdata;

};



/* ecc strength that mt2701 supports */

/* ecc strength that each IP supports */

static const u8 ecc_strength_mt2701[] = {

	4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,

	40, 44, 48, 52, 56, 60

};



static const u8 ecc_strength_mt2712[] = {

	4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,

	40, 44, 48, 52, 56, 60, 68, 72, 80

};



static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc,

				     enum mtk_ecc_operation op)

{
@@ -254,6 +261,7 @@ EXPORT_SYMBOL(of_mtk_ecc_get); 
int mtk_ecc_enable(struct mtk_ecc *ecc, struct mtk_ecc_config *config)

{

	enum mtk_ecc_operation op = config->op;

	u16 reg_val;

	int ret;



	ret = mutex_lock_interruptible(&ecc->lock);
@@ -271,7 +279,15 @@ int mtk_ecc_enable(struct mtk_ecc *ecc, struct mtk_ecc_config *config) 
	writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op));



	init_completion(&ecc->done);

	writew(ECC_IRQ_EN, ecc->regs + ECC_IRQ_REG(op));

	reg_val = ECC_IRQ_EN;

	/*

	 * For ECC_NFI_MODE, if ecc->caps->pg_irq_sel is 1, then it

	 * means this chip can only generate one ecc irq during page

	 * read / write. If is 0, generate one ecc irq each ecc step.

	 */

	if ((ecc->caps->pg_irq_sel) && (config->mode == ECC_NFI_MODE))

		reg_val |= ECC_PG_IRQ_SEL;

	writew(reg_val, ecc->regs + ECC_IRQ_REG(op));



	return 0;

}
@@ -341,7 +357,9 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config, 
	len = (config->strength * ECC_PARITY_BITS + 7) >> 3;



	/* write the parity bytes generated by the ECC back to temp buffer */

	__ioread32_copy(ecc->eccdata, ecc->regs + ECC_ENCPAR(0), round_up(len, 4));

	__ioread32_copy(ecc->eccdata,

			ecc->regs + ecc->caps->encode_parity_reg0,

			round_up(len, 4));



	/* copy into possibly unaligned OOB region with actual length */

	memcpy(data + bytes, ecc->eccdata, len);
@@ -377,12 +395,25 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = { 
	.err_mask = 0x3f,

	.ecc_strength = ecc_strength_mt2701,

	.num_ecc_strength = 20,

	.encode_parity_reg0 = 0x10,

	.pg_irq_sel = 0,

};



static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {

	.err_mask = 0x7f,

	.ecc_strength = ecc_strength_mt2712,

	.num_ecc_strength = 23,

	.encode_parity_reg0 = 0x300,

	.pg_irq_sel = 1,

};



static const struct of_device_id mtk_ecc_dt_match[] = {

	{

		.compatible = "mediatek,mt2701-ecc",

		.data = &mtk_ecc_caps_mt2701,

	}, {

		.compatible = "mediatek,mt2712-ecc",

		.data = &mtk_ecc_caps_mt2712,

	},

	{},

};

drivers/mtd/nand/mtk_nand.c

+14 −0
Original line number Diff line number Diff line
@@ -164,6 +164,11 @@ static const u8 spare_size_mt2701[] = { 
	16, 26, 27, 28, 32, 36, 40, 44,	48, 49, 50, 51, 52, 62, 63, 64

};



static const u8 spare_size_mt2712[] = {

	16, 26, 27, 28, 32, 36, 40, 44, 48, 49, 50, 51, 52, 62, 61, 63, 64, 67,

	74

};



static inline struct mtk_nfc_nand_chip *to_mtk_nand(struct nand_chip *nand)

{

	return container_of(nand, struct mtk_nfc_nand_chip, nand);
@@ -1327,10 +1332,19 @@ static const struct mtk_nfc_caps mtk_nfc_caps_mt2701 = { 
	.pageformat_spare_shift = 4,

};



static const struct mtk_nfc_caps mtk_nfc_caps_mt2712 = {

	.spare_size = spare_size_mt2712,

	.num_spare_size = 19,

	.pageformat_spare_shift = 16,

};



static const struct of_device_id mtk_nfc_id_table[] = {

	{

		.compatible = "mediatek,mt2701-nfc",

		.data = &mtk_nfc_caps_mt2701,

	}, {

		.compatible = "mediatek,mt2712-nfc",

		.data = &mtk_nfc_caps_mt2712,

	},

	{}

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE