Commit 3044a860 authored by Mike Looijmans's avatar Mike Looijmans Committed by Stephen Boyd
Browse files

clk: Add Si5341/Si5340 driver 



Adds a driver for the Si5341 and Si5340 chips. The driver does not fully
support all features of these chips, but allows the chip to be used
without any support from the "clockbuilder pro" software.

If the chip is preprogrammed, that is, you bought one with some defaults
burned in, or you programmed the NVM in some way, the driver will just
take over the current settings and only change them on demand. Otherwise
the input must be a fixed XTAL in its most basic configuration (no
predividers, no feedback, etc.).

The driver supports dynamic changes of multisynth, output dividers and
enabling or powering down outputs and multisynths.

Signed-off-by: default avatarMike Looijmans <mike.looijmans@topic.nl>
[sboyd@kernel.org: Mark some things static, use BIT_ULL for big bits and
ULL for big constants]
Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
parent d743ea67

drivers/clk/Kconfig

+11 −0
Original line number Original line Diff line number Diff line
@@ -91,6 +91,17 @@ config COMMON_CLK_SCPI 
	  This driver uses SCPI Message Protocol to interact with the

	  This driver uses SCPI Message Protocol to interact with the

	  firmware providing all the clock controls.

	  firmware providing all the clock controls.





config COMMON_CLK_SI5341

	tristate "Clock driver for SiLabs 5341 and 5340 A/B/C/D devices"

	depends on I2C

	select REGMAP_I2C

	help

	  This driver supports Silicon Labs Si5341 and Si5340 programmable clock

	  generators. Not all features of these chips are currently supported

	  by the driver, in particular it only supports XTAL input. The chip can

	  be pre-programmed to support other configurations and features not yet

	  implemented in the driver.



config COMMON_CLK_SI5351

config COMMON_CLK_SI5351

	tristate "Clock driver for SiLabs 5351A/B/C"

	tristate "Clock driver for SiLabs 5351A/B/C"

	depends on I2C

	depends on I2C

drivers/clk/Makefile

+1 −0
Original line number Original line Diff line number Diff line
@@ -49,6 +49,7 @@ obj-$(CONFIG_COMMON_CLK_HI655X) += clk-hi655x.o 
obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o

obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o

obj-$(CONFIG_COMMON_CLK_SCMI)           += clk-scmi.o

obj-$(CONFIG_COMMON_CLK_SCMI)           += clk-scmi.o

obj-$(CONFIG_COMMON_CLK_SCPI)           += clk-scpi.o

obj-$(CONFIG_COMMON_CLK_SCPI)           += clk-scpi.o

obj-$(CONFIG_COMMON_CLK_SI5341)		+= clk-si5341.o

obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o

obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o

obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o

obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o

obj-$(CONFIG_COMMON_CLK_SI544)		+= clk-si544.o

obj-$(CONFIG_COMMON_CLK_SI544)		+= clk-si544.o

drivers/clk/clk-si5341.c

0 → 100644
+1346 −0

File added.

Preview size limit exceeded, changes collapsed.

CRA Git | Maintained and supported by SUSTech CRA and CCSE