Merge tag 'fixes-v3.18-not-urgent' of...

1) Interrupt client nodes

-------------------------

Nodes that describe devices which generate interrupts must contain an either an

"interrupts" property or an "interrupts-extended" property. These properties

contain a list of interrupt specifiers, one per output interrupt. The format of

the interrupt specifier is determined by the interrupt controller to which the

interrupts are routed; see section 2 below for details.

Nodes that describe devices which generate interrupts must contain an

"interrupts" property, an "interrupts-extended" property, or both. If both are

present, the latter should take precedence; the former may be provided simply

for compatibility with software that does not recognize the latter. These

properties contain a list of interrupt specifiers, one per output interrupt. The

format of the interrupt specifier is determined by the interrupt controller to

which the interrupts are routed; see section 2 below for details.

  Example:

	interrupt-parent = <&intc1>;

* Toshiba TC3589x multi-purpose expander

The Toshiba TC3589x series are I2C-based MFD devices which may expose the

following built-in devices: gpio, keypad, rotator (vibrator), PWM (for

e.g. LEDs or vibrators) The included models are:

- TC35890

- TC35892

- TC35893

- TC35894

- TC35895

- TC35896

Required properties:

 - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",

   "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"

 - reg : I2C address of the device

 - interrupt-parent : specifies which IRQ controller we're connected to

 - interrupts : the interrupt on the parent the controller is connected to

 - interrupt-controller : marks the device node as an interrupt controller

 - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this

   TC3589x interrupt controller.

Optional nodes:

- GPIO

  This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20

  (other models) GPIO lines.

 - compatible : must be "toshiba,tc3589x-gpio"

 - interrupts : interrupt on the parent, which must be the tc3589x MFD device

 - interrupt-controller : marks the device node as an interrupt controller

 - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this

   TC3589x GPIO interrupt controller, the second cell is the interrupt flags

   in accordance with <dt-bindings/interrupt-controller/irq.h>. The following

   flags are valid:

   - IRQ_TYPE_LEVEL_LOW

   - IRQ_TYPE_LEVEL_HIGH

   - IRQ_TYPE_EDGE_RISING

   - IRQ_TYPE_EDGE_FALLING

   - IRQ_TYPE_EDGE_BOTH

 - gpio-controller : marks the device node as a GPIO controller

 - #gpio-cells : should be <2>, the first cell is the GPIO offset on this

   GPIO controller, the second cell is the flags.

- Keypad

  This keypad is the same on all variants, supporting up to 96 different

  keys. The linux-specific properties are modeled on those already existing

  in other input drivers.

 - compatible : must be "toshiba,tc3589x-keypad"

 - debounce-delay-ms : debounce interval in milliseconds

 - keypad,num-rows : number of rows in the matrix, see

   bindings/input/matrix-keymap.txt

 - keypad,num-columns : number of columns in the matrix, see

   bindings/input/matrix-keymap.txt

 - linux,keymap: the definition can be found in

   bindings/input/matrix-keymap.txt

 - linux,no-autorepeat: do no enable autorepeat feature.

 - linux,wakeup: use any event on keypad as wakeup event.

Example:

tc35893@44 {

	compatible = "toshiba,tc35893";

	reg = <0x44>;

	interrupt-parent = <&gpio6>;

	interrupts = <26 IRQ_TYPE_EDGE_RISING>;

	interrupt-controller;

	#interrupt-cells = <1>;

	tc3589x_gpio {

		compatible = "toshiba,tc3589x-gpio";

		interrupts = <0>;

		interrupt-controller;

		#interrupt-cells = <2>;

		gpio-controller;

		#gpio-cells = <2>;

	};

	tc3589x_keypad {

		compatible = "toshiba,tc3589x-keypad";

		interrupts = <6>;

		debounce-delay-ms = <4>;

		keypad,num-columns = <8>;

		keypad,num-rows = <8>;

		linux,no-autorepeat;

		linux,wakeup;

		linux,keymap = <0x0301006b

				0x04010066

				0x06040072

				0x040200d7

				0x0303006a

				0x0205000e

				0x0607008b

				0x0500001c

				0x0403000b

				0x03040034

				0x05020067

				0x0305006c

				0x040500e7

				0x0005009e

				0x06020073

				0x01030039

				0x07060069

				0x050500d9>;

	};

};

				width of 8 is assumed.

 - ti,nand-ecc-opt:		A string setting the ECC layout to use. One of:

		"sw"		<deprecated> use "ham1" instead

		"sw"		1-bit Hamming ecc code via software

		"hw"		<deprecated> use "ham1" instead

		"hw-romcode"	<deprecated> use "ham1" instead

		"ham1"		1-bit Hamming ecc code

Required properties:

- compatible: should contain "snps,dw-pcie" to identify the core.

- reg: Should contain the configuration address space.

- reg-names: Must be "config" for the PCIe configuration space.

    (The old way of getting the configuration address space from "ranges"

    is deprecated and should be avoided.)

- #address-cells: set to <3>

- #size-cells: set to <2>

- device_type: set to "pci"

TI PCI Controllers

PCIe Designware Controller

 - compatible: Should be "ti,dra7-pcie""

 - reg : Two register ranges as listed in the reg-names property

 - reg-names : The first entry must be "ti-conf" for the TI specific registers

	       The second entry must be "rc-dbics" for the designware pcie

	       registers

	       The third entry must be "config" for the PCIe configuration space

 - phys : list of PHY specifiers (used by generic PHY framework)

 - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the

	       number of PHYs as specified in *phys* property.

 - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",

	       where <X> is the instance number of the pcie from the HW spec.

 - interrupts : Two interrupt entries must be specified. The first one is for

		main interrupt line and the second for MSI interrupt line.

 - #address-cells,

   #size-cells,

   #interrupt-cells,

   device_type,

   ranges,

   num-lanes,

   interrupt-map-mask,

   interrupt-map : as specified in ../designware-pcie.txt

Example:

axi {

	compatible = "simple-bus";

	#size-cells = <1>;

	#address-cells = <1>;

	ranges = <0x51000000 0x51000000 0x3000

		  0x0	     0x20000000 0x10000000>;

	pcie@51000000 {

		compatible = "ti,dra7-pcie";

		reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;

		reg-names = "rc_dbics", "ti_conf", "config";

		interrupts = <0 232 0x4>, <0 233 0x4>;

		#address-cells = <3>;

		#size-cells = <2>;

		device_type = "pci";

		ranges = <0x81000000 0 0          0x03000 0 0x00010000

			  0x82000000 0 0x20013000 0x13000 0 0xffed000>;

		#interrupt-cells = <1>;

		num-lanes = <1>;

		ti,hwmods = "pcie1";

		phys = <&pcie1_phy>;

		phy-names = "pcie-phy0";

		interrupt-map-mask = <0 0 0 7>;

		interrupt-map = <0 0 0 1 &pcie_intc 1>,

				<0 0 0 2 &pcie_intc 2>,

				<0 0 0 3 &pcie_intc 3>,

				<0 0 0 4 &pcie_intc 4>;

		pcie_intc: interrupt-controller {

			interrupt-controller;

			#address-cells = <0>;

			#interrupt-cells = <1>;

		};

	};

};