Commit 2fee61d2 authored by Christian Fetzer's avatar Christian Fetzer Committed by Wolfram Sang
Browse files

i2c: piix4: Add support for multiplexed main adapter in SB800 



The SB800 chipset supports a multiplexed main SMBus controller with
four ports. The multiplexed ports share the same SMBus address and
register set. The port is selected by bits 2:1 of the smb_en register
(0x2C).

Only one port can be active at any point in time therefore a mutex is
needed in order to synchronize access.

Additionally, the commit avoids requesting and releasing the SMBus base
address index region on every multiplexed transfer by moving the
request_region call into piix4_probe.

Tested on HP ProLiant MicroServer G7 N54L (where this patch adds
support to access sensor data from the w83795adg).

Cc: Thomas Brandon <tbrandonau@gmail.com>
Cc: Eddi De Pieri <eddi@depieri.net>
Signed-off-by: default avatarChristian Fetzer <fetzer.ch@gmail.com>
Reviewed-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent ca2061e1

drivers/i2c/busses/i2c-piix4.c

+147 −22
Original line number Diff line number Diff line
@@ -23,6 +23,9 @@ 


   Note: we assume there can only be one device, with one or more

   SMBus interfaces.

   The device can register multiple i2c_adapters (up to PIIX4_MAX_ADAPTERS).

   For devices supporting multiple ports the i2c_adapter should provide

   an i2c_algorithm to access them.

*/



#include <linux/module.h>
@@ -37,6 +40,7 @@ 
#include <linux/dmi.h>

#include <linux/acpi.h>

#include <linux/io.h>

#include <linux/mutex.h>





/* PIIX4 SMBus address offsets */
@@ -78,6 +82,13 @@ 
/* Multi-port constants */

#define PIIX4_MAX_ADAPTERS 4



/* SB800 constants */

#define SB800_PIIX4_SMB_IDX		0xcd6



/* SB800 port is selected by bits 2:1 of the smb_en register (0x2c) */

#define SB800_PIIX4_PORT_IDX		0x2c

#define SB800_PIIX4_PORT_IDX_MASK	0x06



/* insmod parameters */



/* If force is set to anything different from 0, we forcibly enable the
@@ -127,6 +138,11 @@ static const struct dmi_system_id piix4_dmi_ibm[] = { 


struct i2c_piix4_adapdata {

	unsigned short smba;



	/* SB800 */

	bool sb800_main;

	unsigned short port;

	struct mutex *mutex;

};



static int piix4_setup(struct pci_dev *PIIX4_dev,
@@ -232,7 +248,6 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, 
			     const struct pci_device_id *id, u8 aux)

{

	unsigned short piix4_smba;

	unsigned short smba_idx = 0xcd6;

	u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;

	u8 i2ccfg, i2ccfg_offset = 0x10;
@@ -254,16 +269,10 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, 
	else

		smb_en = (aux) ? 0x28 : 0x2c;



	if (!request_region(smba_idx, 2, "smba_idx")) {

		dev_err(&PIIX4_dev->dev, "SMBus base address index region "

			"0x%x already in use!\n", smba_idx);

		return -EBUSY;

	}

	outb_p(smb_en, smba_idx);

	smba_en_lo = inb_p(smba_idx + 1);

	outb_p(smb_en + 1, smba_idx);

	smba_en_hi = inb_p(smba_idx + 1);

	release_region(smba_idx, 2);

	outb_p(smb_en, SB800_PIIX4_SMB_IDX);

	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);

	outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);

	smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);



	if (!smb_en) {

		smb_en_status = smba_en_lo & 0x10;
@@ -527,6 +536,43 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, 
	return 0;

}



/*

 * Handles access to multiple SMBus ports on the SB800.

 * The port is selected by bits 2:1 of the smb_en register (0x2c).

 * Returns negative errno on error.

 *

 * Note: The selected port must be returned to the initial selection to avoid

 * problems on certain systems.

 */

static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,

		 unsigned short flags, char read_write,

		 u8 command, int size, union i2c_smbus_data *data)

{

	struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);

	u8 smba_en_lo;

	u8 port;

	int retval;



	mutex_lock(adapdata->mutex);



	outb_p(SB800_PIIX4_PORT_IDX, SB800_PIIX4_SMB_IDX);

	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);



	port = adapdata->port;

	if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != (port << 1))

		outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | (port << 1),

		       SB800_PIIX4_SMB_IDX + 1);



	retval = piix4_access(adap, addr, flags, read_write,

			      command, size, data);



	outb_p(smba_en_lo, SB800_PIIX4_SMB_IDX + 1);



	mutex_unlock(adapdata->mutex);



	return retval;

}



static u32 piix4_func(struct i2c_adapter *adapter)

{

	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
@@ -539,6 +585,11 @@ static const struct i2c_algorithm smbus_algorithm = { 
	.functionality	= piix4_func,

};



static const struct i2c_algorithm piix4_smbus_algorithm_sb800 = {

	.smbus_xfer	= piix4_access_sb800,

	.functionality	= piix4_func,

};



static const struct pci_device_id piix4_ids[] = {

	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },

	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) },
@@ -614,6 +665,53 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, 
	return 0;

}



static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba)

{

	struct mutex *mutex;

	struct i2c_piix4_adapdata *adapdata;

	int port;

	int retval;



	mutex = kzalloc(sizeof(*mutex), GFP_KERNEL);

	if (mutex == NULL)

		return -ENOMEM;



	mutex_init(mutex);



	for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) {

		retval = piix4_add_adapter(dev, smba,

					   &piix4_main_adapters[port]);

		if (retval < 0)

			goto error;



		piix4_main_adapters[port]->algo = &piix4_smbus_algorithm_sb800;



		adapdata = i2c_get_adapdata(piix4_main_adapters[port]);

		adapdata->sb800_main = true;

		adapdata->port = port;

		adapdata->mutex = mutex;

	}



	return retval;



error:

	dev_err(&dev->dev,

		"Error setting up SB800 adapters. Unregistering!\n");

	while (--port >= 0) {

		adapdata = i2c_get_adapdata(piix4_main_adapters[port]);

		if (adapdata->smba) {

			i2c_del_adapter(piix4_main_adapters[port]);

			kfree(adapdata);

			kfree(piix4_main_adapters[port]);

			piix4_main_adapters[port] = NULL;

		}

	}



	kfree(mutex);



	return retval;

}



static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)

{

	int retval;
@@ -621,20 +719,41 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) 
	if ((dev->vendor == PCI_VENDOR_ID_ATI &&

	     dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&

	     dev->revision >= 0x40) ||

	    dev->vendor == PCI_VENDOR_ID_AMD)

	    dev->vendor == PCI_VENDOR_ID_AMD) {

		if (!request_region(SB800_PIIX4_SMB_IDX, 2, "smba_idx")) {

			dev_err(&dev->dev,

			"SMBus base address index region 0x%x already in use!\n",

			SB800_PIIX4_SMB_IDX);

			return -EBUSY;

		}



		/* base address location etc changed in SB800 */

		retval = piix4_setup_sb800(dev, id, 0);

	else

		retval = piix4_setup(dev, id);

		if (retval < 0) {

			release_region(SB800_PIIX4_SMB_IDX, 2);

			return retval;

		}



	/* If no main SMBus found, give up */

		/*

		 * Try to register multiplexed main SMBus adapter,

		 * give up if we can't

		 */

		retval = piix4_add_adapters_sb800(dev, retval);

		if (retval < 0) {

			release_region(SB800_PIIX4_SMB_IDX, 2);

			return retval;

		}

	} else {

		retval = piix4_setup(dev, id);

		if (retval < 0)

			return retval;



		/* Try to register main SMBus adapter, give up if we can't */

	retval = piix4_add_adapter(dev, retval, &piix4_main_adapters[0]);

		retval = piix4_add_adapter(dev, retval,

					   &piix4_main_adapters[0]);

		if (retval < 0)

			return retval;

	}



	/* Check for auxiliary SMBus on some AMD chipsets */

	retval = -ENODEV;
@@ -669,7 +788,13 @@ static void piix4_adap_remove(struct i2c_adapter *adap) 


	if (adapdata->smba) {

		i2c_del_adapter(adap);

		if (adapdata->port == 0) {

			release_region(adapdata->smba, SMBIOSIZE);

			if (adapdata->sb800_main) {

				kfree(adapdata->mutex);

				release_region(SB800_PIIX4_SMB_IDX, 2);

			}

		}

		kfree(adapdata);

		kfree(adap);

	}

CRA Git | Maintained and supported by SUSTech CRA and CCSE