OMAP3: PM: CORE domain off-mode support (2f5939c3) · Commits · 戴 / test

arch/arm/mach-omap2/pm34xx.c

+72 −1

Original line number	Diff line number	Diff line
		@@ -5,6 +5,9 @@
		* Tony Lindgren <tony@atomide.com>
		* Jouni Hogander
		*
		* Copyright (C) 2007 Texas Instruments, Inc.
		* Rajendra Nayak <rnayak@ti.com>
		*
		* Copyright (C) 2005 Texas Instruments, Inc.
		* Richard Woodruff <r-woodruff2@ti.com>
		*
		@@ -29,6 +32,8 @@
		#include <plat/control.h>
		#include <plat/serial.h>
		#include <plat/sdrc.h>
		#include <plat/prcm.h>
		#include <plat/gpmc.h>

		#include <asm/tlbflush.h>

		@@ -39,6 +44,11 @@
		#include "prm.h"
		#include "pm.h"

		/* Scratchpad offsets */
		#define OMAP343X_TABLE_ADDRESS_OFFSET 0x31
		#define OMAP343X_TABLE_VALUE_OFFSET 0x30
		#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0x32

		struct power_state {
		struct powerdomain *pwrdm;
		u32 next_state;
		@@ -57,6 +67,46 @@ static struct powerdomain core_pwrdm, per_pwrdm;

		static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);

		static inline void omap3_per_save_context(void)
		{
		omap_gpio_save_context();
		}

		static inline void omap3_per_restore_context(void)
		{
		omap_gpio_restore_context();
		}

		static void omap3_core_save_context(void)
		{
		u32 control_padconf_off;

		/* Save the padconf registers */
		control_padconf_off = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
		control_padconf_off \|= START_PADCONF_SAVE;
		omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
		/* wait for the save to complete */
		while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
		& PADCONF_SAVE_DONE)
		;
		/* Save the Interrupt controller context */
		omap_intc_save_context();
		/* Save the GPMC context */
		omap3_gpmc_save_context();
		/* Save the system control module context, padconf already save above*/
		omap3_control_save_context();
		}

		static void omap3_core_restore_context(void)
		{
		/* Restore the control module context, padconf restored by h/w */
		omap3_control_restore_context();
		/* Restore the GPMC context */
		omap3_gpmc_restore_context();
		/* Restore the interrupt controller context */
		omap_intc_restore_context();
		}

		/*
		* PRCM Interrupt Handler Helper Function
		*
		@@ -208,6 +258,7 @@ static void omap_sram_idle(void)
		int mpu_next_state = PWRDM_POWER_ON;
		int per_next_state = PWRDM_POWER_ON;
		int core_next_state = PWRDM_POWER_ON;
		int core_prev_state, per_prev_state;

		if (!_omap_sram_idle)
		return;
		@@ -246,8 +297,15 @@ static void omap_sram_idle(void)
		omap_uart_prepare_idle(1);
		/* PER changes only with core */
		per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
		if (per_next_state < PWRDM_POWER_ON)
		if (per_next_state < PWRDM_POWER_ON) {
		omap_uart_prepare_idle(2);
		if (per_next_state == PWRDM_POWER_OFF)
		omap3_per_save_context();
		}
		if (core_next_state == PWRDM_POWER_OFF) {
		omap3_core_save_context();
		omap3_prcm_save_context();
		}
		/* Enable IO-PAD wakeup */
		prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
		}
		@@ -272,6 +330,18 @@ static void omap_sram_idle(void)

		/* Disable IO-PAD wakeup */
		prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
		if (core_prev_state == PWRDM_POWER_OFF) {
		omap3_core_restore_context();
		omap3_prcm_restore_context();
		omap3_sram_restore_context();
		}
		if (per_next_state < PWRDM_POWER_ON) {
		per_prev_state =
		pwrdm_read_prev_pwrst(per_pwrdm);
		if (per_prev_state == PWRDM_POWER_OFF)
		omap3_per_restore_context();
		}
		omap2_gpio_resume_after_retention();
		}

		@@ -843,6 +913,7 @@ static int __init omap3_pm_init(void)
		/* XXX prcm_setup_regs needs to be before enabling hw
		* supervised mode for powerdomains */
		prcm_setup_regs();
		omap3_save_scratchpad_contents();

		ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
		(irq_handler_t)prcm_interrupt_handler,

arch/arm/plat-omap/include/plat/sram.h

+1 −0

Original line number	Diff line number	Diff line
		@@ -27,6 +27,7 @@ extern u32 omap3_configure_core_dpll(
		u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
		u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
		u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
		extern void omap3_sram_restore_context(void);

		/* Do not use these */
		extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);

Admin message