V4L/DVB: tm6000: add gpios to board struct (2edab1ee) · Commits · 戴 / test

drivers/staging/tm6000/tm6000-cards.c

+28 −9

Original line number	Diff line number	Diff line
		@@ -195,9 +195,16 @@ struct tm6000_board tm6000_boards[] = {
		.has_dvb = 1,
		.has_zl10353 = 1,
		.has_eeprom = 1,
		.has_remote = 1,
		},
		.gpio = {
		.tuner_reset = TM6010_GPIO_2,
		.tuner_on = TM6010_GPIO_3,
		.demod_reset = TM6010_GPIO_1,
		.demod_on = TM6010_GPIO_4,
		.power_led = TM6010_GPIO_7,
		.dvb_led = TM6010_GPIO_5,
		.ir = TM6010_GPIO_0,
		},
		},
		[TM6010_BOARD_BEHOLD_WANDER] = {
		@@ -248,6 +255,12 @@ struct tm6000_board tm6000_boards[] = {
		},
		.gpio = {
		.tuner_reset = TM6010_GPIO_2,
		.tuner_on = TM6010_GPIO_3,
		.demod_reset = TM6010_GPIO_1,
		.demod_on = TM6010_GPIO_4,
		.power_led = TM6010_GPIO_7,
		.dvb_led = TM6010_GPIO_5,
		.ir = TM6010_GPIO_0,
		},
		},
		[TM6010_BOARD_TWINHAN_TU501] = {
		@@ -265,6 +278,12 @@ struct tm6000_board tm6000_boards[] = {
		},
		.gpio = {
		.tuner_reset = TM6010_GPIO_2,
		.tuner_on = TM6010_GPIO_3,
		.demod_reset = TM6010_GPIO_1,
		.demod_on = TM6010_GPIO_4,
		.power_led = TM6010_GPIO_7,
		.dvb_led = TM6010_GPIO_5,
		.ir = TM6010_GPIO_0,
		},
		}
		};
		@@ -382,30 +401,30 @@ int tm6000_cards_setup(struct tm6000_core *dev)
		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
		case TM6010_BOARD_TWINHAN_TU501:
		/* Turn xceive 3028 on */
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_3, 0x01);
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
		msleep(15);
		/* Turn zarlink zl10353 on */
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_4, 0x00);
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
		msleep(15);
		/* Reset zarlink zl10353 */
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_1, 0x00);
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
		msleep(50);
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_1, 0x01);
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
		msleep(15);
		/* Turn zarlink zl10353 off */
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_4, 0x01);
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
		msleep(15);
		/* ir ? */
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_0, 0x01);
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
		msleep(15);
		/* Power led on (blue) */
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_7, 0x00);
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
		msleep(15);
		/* DVB led off (orange) */
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_5, 0x01);
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
		msleep(15);
		/* Turn zarlink zl10353 on */
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_4, 0x00);
		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
		msleep(15);
		break;
		default:

Admin message