Commit 2e7fc3ba authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Felipe Balbi
Browse files

usb: musb: use a Kconfig choice to pick the right DMA method 



The logic to allow only one DMA driver in MUSB is currently
flawed, because it also allows picking no DMA driver at all
and also not selecting PIO mode.

Using a choice statement makes this foolproof for now and
also simplifies the Makefile.

Unfortunately, we will have to revisit this when we start
supporting multiple ARM platforms in a single kernel binary,
because at that point we will actually need to select
multiple DMA drivers and pick the right one at run-time.

Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent e25bec16

drivers/usb/musb/Kconfig

+34 −23
Original line number Diff line number Diff line
@@ -65,46 +65,57 @@ config USB_MUSB_UX500 


endchoice



config MUSB_PIO_ONLY

	bool 'Disable DMA (always use PIO)'

	depends on USB_MUSB_HDRC

	default USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X

choice

	prompt 'MUSB DMA mode'

	default USB_UX500_DMA if USB_MUSB_UX500

	default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN

	default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI

	default USB_TUSB_OMAP_DMA if USB_MUSB_TUSB6010

	default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X

	help

	  All data is copied between memory and FIFO by the CPU.

	  DMA controllers are ignored.



	  Do not select 'n' here unless DMA support for your SOC or board

	  is unavailable (or unstable).  When DMA is enabled at compile time,

	  you can still disable it at run time using the "use_dma=n" module

	  parameter.

	  Unfortunately, only one option can be enabled here. Ideally one

	  should be able to build all these drivers into one kernel to

	  allow using DMA on multiplatform kernels.



config USB_UX500_DMA

	bool

	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY

	default USB_MUSB_UX500

	bool 'ST Ericsson U8500 and U5500'

	depends on USB_MUSB_HDRC

	depends on USB_MUSB_UX500

	help

	  Enable DMA transfers on UX500 platforms.



config USB_INVENTRA_DMA

	bool

	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY

	default USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN

	bool 'Inventra'

	depends on USB_MUSB_HDRC

	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN

	help

	  Enable DMA transfers using Mentor's engine.



config USB_TI_CPPI_DMA

	bool

	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY

	default USB_MUSB_DAVINCI

	bool 'TI CPPI (Davinci)'

	depends on USB_MUSB_HDRC

	depends on USB_MUSB_DAVINCI

	help

	  Enable DMA transfers when TI CPPI DMA is available.



config USB_TUSB_OMAP_DMA

	bool

	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY

	bool 'TUSB 6010'

	depends on USB_MUSB_HDRC

	depends on USB_MUSB_TUSB6010

	depends on ARCH_OMAP

	default y

	help

	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.



config MUSB_PIO_ONLY

	bool 'Disable DMA (always use PIO)'

	depends on USB_MUSB_HDRC

	help

	  All data is copied between memory and FIFO by the CPU.

	  DMA controllers are ignored.



	  Do not choose this unless DMA support for your SOC or board

	  is unavailable (or unstable).  When DMA is enabled at compile time,

	  you can still disable it at run time using the "use_dma=n" module

	  parameter.



endchoice

drivers/usb/musb/Makefile

+4 −22
Original line number Diff line number Diff line
@@ -24,25 +24,7 @@ obj-$(CONFIG_USB_MUSB_UX500) += ux500.o 
# PIO only, or DMA (several potential schemes).

# though PIO is always there to back up DMA, and for ep0



ifneq ($(CONFIG_MUSB_PIO_ONLY),y)



  ifeq ($(CONFIG_USB_INVENTRA_DMA),y)

    musb_hdrc-y			+= musbhsdma.o



  else

    ifeq ($(CONFIG_USB_TI_CPPI_DMA),y)

      musb_hdrc-y		+= cppi_dma.o



    else

      ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)

	musb_hdrc-y		+= tusb6010_omap.o



      else

        ifeq ($(CONFIG_USB_UX500_DMA),y)

	  musb_hdrc-y		+= ux500_dma.o



        endif

      endif

    endif

  endif

endif
 
musb_hdrc-$(CONFIG_USB_INVENTRA_DMA)		+= musbhsdma.o

musb_hdrc-$(CONFIG_USB_TI_CPPI_DMA)		+= cppi_dma.o

musb_hdrc-$(CONFIG_USB_TUSB_OMAP_DMA)		+= tusb6010_omap.o

musb_hdrc-$(CONFIG_USB_UX500_DMA)		+= ux500_dma.o

CRA Git | Maintained and supported by SUSTech CRA and CCSE