Commit 2e34b429 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  MAINTAINERS: add myself as maintainer of USB/IP
  usb: r8a66597-hcd: fix cannot detect low/full speed device
  USB: ehci-ath79: fix a NULL pointer dereference
  USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c
  usb/isp1760: Fix bug preventing the unlinking of control urbs
  USB: Fix up URB error codes to reflect implementation.
  xhci: Always set urb->status to zero for isoc endpoints.
  xhci: Add reset on resume quirk for asrock p67 host
  xHCI 1.0: Incompatible Device Error
  USB: don't let errors prevent system sleep
  USB: don't let the hub driver prevent system sleep
  USB: change maintainership of ohci-hcd and ehci-hcd
  xHCI 1.0: Force Stopped Event(FSE)
  xhci: Don't warn about zeroed bMaxBurst descriptor field.
  USB: Free bandwidth when usb_disable_device is called.
  xhci: Reject double add of active endpoints.
  USB: TI 3410/5052 USB Serial Driver: Fix mem leak when firmware is too big.
  usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFO
  usb: musb: host: compare status for negative error values
parents 04b90594 857aab34

Documentation/usb/error-codes.txt

+8 −1
Original line number Diff line number Diff line
@@ -76,6 +76,13 @@ A transfer's actual_length may be positive even when an error has been 
reported.  That's because transfers often involve several packets, so that

one or more packets could finish before an error stops further endpoint I/O.



For isochronous URBs, the urb status value is non-zero only if the URB is

unlinked, the device is removed, the host controller is disabled, or the total

transferred length is less than the requested length and the URB_SHORT_NOT_OK

flag is set.  Completion handlers for isochronous URBs should only see

urb->status set to zero, -ENOENT, -ECONNRESET, -ESHUTDOWN, or -EREMOTEIO.

Individual frame descriptor status fields may report more status codes.





0			Transfer completed successfully
@@ -132,7 +139,7 @@ one or more packets could finish before an error stops further endpoint I/O. 
			device removal events immediately.



-EXDEV			ISO transfer only partially completed

			look at individual frame status for details

			(only set in iso_frame_desc[n].status, not urb->status)



-EINVAL			ISO madness, if this happens: Log off and go home

MAINTAINERS

+10 −2
Original line number Diff line number Diff line
@@ -6434,8 +6434,9 @@ S: Maintained 
F:	drivers/usb/misc/rio500*



USB EHCI DRIVER

M:	Alan Stern <stern@rowland.harvard.edu>

L:	linux-usb@vger.kernel.org

S:	Orphan

S:	Maintained

F:	Documentation/usb/ehci.txt

F:	drivers/usb/host/ehci*
@@ -6465,6 +6466,12 @@ S: Maintained 
F:	Documentation/hid/hiddev.txt

F:	drivers/hid/usbhid/



USB/IP DRIVERS

M:	Matt Mooney <mfm@muteddisk.com>

L:	linux-usb@vger.kernel.org

S:	Maintained

F:	drivers/staging/usbip/



USB ISP116X DRIVER

M:	Olav Kongas <ok@artecdesign.ee>

L:	linux-usb@vger.kernel.org
@@ -6494,8 +6501,9 @@ S: Maintained 
F:	sound/usb/midi.*



USB OHCI DRIVER

M:	Alan Stern <stern@rowland.harvard.edu>

L:	linux-usb@vger.kernel.org

S:	Orphan

S:	Maintained

F:	Documentation/usb/ohci.txt

F:	drivers/usb/host/ohci*

drivers/usb/core/driver.c

+10 −1
Original line number Diff line number Diff line
@@ -1187,13 +1187,22 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) 
		for (i = n - 1; i >= 0; --i) {

			intf = udev->actconfig->interface[i];

			status = usb_suspend_interface(udev, intf, msg);



			/* Ignore errors during system sleep transitions */

			if (!(msg.event & PM_EVENT_AUTO))

				status = 0;

			if (status != 0)

				break;

		}

	}

	if (status == 0)

	if (status == 0) {

		status = usb_suspend_device(udev, msg);



		/* Again, ignore errors during system sleep transitions */

		if (!(msg.event & PM_EVENT_AUTO))

			status = 0;

	}



	/* If the suspend failed, resume interfaces that did get suspended */

	if (status != 0) {

		msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME);

drivers/usb/core/hub.c

+11 −5
Original line number Diff line number Diff line
@@ -1634,6 +1634,7 @@ void usb_disconnect(struct usb_device **pdev) 
{

	struct usb_device	*udev = *pdev;

	int			i;

	struct usb_hcd		*hcd = bus_to_hcd(udev->bus);



	if (!udev) {

		pr_debug ("%s nodev\n", __func__);
@@ -1661,7 +1662,9 @@ void usb_disconnect(struct usb_device **pdev) 
	 * so that the hardware is now fully quiesced.

	 */

	dev_dbg (&udev->dev, "unregistering device\n");

	mutex_lock(hcd->bandwidth_mutex);

	usb_disable_device(udev, 0);

	mutex_unlock(hcd->bandwidth_mutex);

	usb_hcd_synchronize_unlinks(udev);



	usb_remove_ep_devs(&udev->ep0);
@@ -2362,6 +2365,10 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) 
				USB_DEVICE_REMOTE_WAKEUP, 0,

				NULL, 0,

				USB_CTRL_SET_TIMEOUT);



		/* System sleep transitions should never fail */

		if (!(msg.event & PM_EVENT_AUTO))

			status = 0;

	} else {

		/* device has up to 10 msec to fully suspend */

		dev_dbg(&udev->dev, "usb %ssuspend\n",
@@ -2611,15 +2618,14 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) 
	struct usb_device	*hdev = hub->hdev;

	unsigned		port1;



	/* fail if children aren't already suspended */

	/* Warn if children aren't already suspended */

	for (port1 = 1; port1 <= hdev->maxchild; port1++) {

		struct usb_device	*udev;



		udev = hdev->children [port1-1];

		if (udev && udev->can_submit) {

			if (!(msg.event & PM_EVENT_AUTO))

				dev_dbg(&intf->dev, "port %d nyet suspended\n",

						port1);

			dev_warn(&intf->dev, "port %d nyet suspended\n", port1);

			if (msg.event & PM_EVENT_AUTO)

				return -EBUSY;

		}

	}

drivers/usb/core/message.c

+14 −1
Original line number Diff line number Diff line
@@ -1135,10 +1135,13 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, 
 * Deallocates hcd/hardware state for the endpoints (nuking all or most

 * pending urbs) and usbcore state for the interfaces, so that usbcore

 * must usb_set_configuration() before any interfaces could be used.

 *

 * Must be called with hcd->bandwidth_mutex held.

 */

void usb_disable_device(struct usb_device *dev, int skip_ep0)

{

	int i;

	struct usb_hcd *hcd = bus_to_hcd(dev->bus);



	/* getting rid of interfaces will disconnect

	 * any drivers bound to them (a key side effect)
@@ -1172,6 +1175,16 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) 


	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,

		skip_ep0 ? "non-ep0" : "all");

	if (hcd->driver->check_bandwidth) {

		/* First pass: Cancel URBs, leave endpoint pointers intact. */

		for (i = skip_ep0; i < 16; ++i) {

			usb_disable_endpoint(dev, i, false);

			usb_disable_endpoint(dev, i + USB_DIR_IN, false);

		}

		/* Remove endpoints from the host controller internal state */

		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);

		/* Second pass: remove endpoint pointers */

	}

	for (i = skip_ep0; i < 16; ++i) {

		usb_disable_endpoint(dev, i, true);

		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
@@ -1727,6 +1740,7 @@ free_interfaces: 
	/* if it's already configured, clear out old state first.

	 * getting rid of old interfaces means unbinding their drivers.

	 */

	mutex_lock(hcd->bandwidth_mutex);

	if (dev->state != USB_STATE_ADDRESS)

		usb_disable_device(dev, 1);	/* Skip ep0 */
@@ -1739,7 +1753,6 @@ free_interfaces: 
	 * host controller will not allow submissions to dropped endpoints.  If

	 * this call fails, the device state is unchanged.

	 */

	mutex_lock(hcd->bandwidth_mutex);

	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);

	if (ret < 0) {

		mutex_unlock(hcd->bandwidth_mutex);

CRA Git | Maintained and supported by SUSTech CRA and CCSE