Merge tag 'imx-soc-3.19' into imx/dt

i.mx6 Poweroff Driver

SNVS_LPCR in SNVS module can power off the whole system by pull

PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC.

If you don't want to use PMIC_ON_REQ as power on/off control,

please set status='disabled' to disable this driver.

Required Properties:

-compatible: "fsl,sec-v4.0-poweroff"

-reg: Specifies the physical address of the SNVS_LPCR register

Example:

	snvs@020cc000 {

		compatible = "fsl,sec-v4.0-mon", "simple-bus";

		#address-cells = <1>;

		#size-cells = <1>;

		ranges = <0 0x020cc000 0x4000>;

		.....

		snvs_poweroff: snvs-poweroff@38 {

			compatible = "fsl,sec-v4.0-poweroff";

			reg = <0x38 0x4>;

		};

	}

# CONFIG_HW_RANDOM is not set

CONFIG_I2C_CHARDEV=y

CONFIG_I2C_IMX=y

CONFIG_SPI=y

CONFIG_SPI_IMX=y

CONFIG_SPI_SPIDEV=y

CONFIG_GPIO_SYSFS=y

CONFIG_I2C_ALGOPCF=m

CONFIG_I2C_ALGOPCA=m

CONFIG_I2C_IMX=y

CONFIG_SPI=y

CONFIG_SPI_IMX=y

CONFIG_GPIO_SYSFS=y

CONFIG_GPIO_MC9S08DZ60=y

	bool "Vybrid Family VF610 support"

	select ARM_GIC

	select PINCTRL_VF610

	select VF_PIT_TIMER

	select PL310_ERRATA_769419 if CACHE_L2X0

	help

	  This enable support for Freescale Vybrid VF610 processor.

choice

	prompt "Clocksource for scheduler clock"

	depends on SOC_VF610

	default VF_USE_ARM_GLOBAL_TIMER

	config VF_USE_ARM_GLOBAL_TIMER

		bool "Use ARM Global Timer"

		select ARM_GLOBAL_TIMER

		select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK

		help

		  Use the ARM Global Timer as clocksource

	config VF_USE_PIT_TIMER

		bool "Use PIT timer"

		select VF_PIT_TIMER

		help

		  Use SoC Periodic Interrupt Timer (PIT) as clocksource

endchoice

config SOC_LS1021A

	bool "Freescale LS1021A support"

	select ARM_GIC

	select HAVE_ARM_ARCH_TIMER

	select PCI_DOMAINS if PCI

	select ZONE_DMA if ARM_LPAE

	help

	  This enable support for Freescale LS1021A processor.

endif

source "arch/arm/mach-imx/devices/Kconfig"

obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o

imx5-pm-$(CONFIG_PM) += pm-imx5.o

obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y)

obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o clk-cpu.o $(imx5-pm-y)

obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \

			    clk-pfd.o clk-busy.o clk.o \

obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o

obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o

obj-$(CONFIG_HAVE_IMX_SRC) += src.o

ifdef CONFIG_SOC_IMX6

ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),)

AFLAGS_headsmp.o :=-Wa,-march=armv7-a

obj-$(CONFIG_SMP) += headsmp.o platsmp.o

obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o

obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o

obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o

obj-y += devices/