Commit 2ca7d674 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm 

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (257 commits)
  [ARM] Update mach-types
  ARM: 5636/1: Move vendor enum to AMBA include
  ARM: Fix pfn_valid() for sparse memory
  [ARM] orion5x: Add LaCie NAS 2Big Network support
  [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume
  ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board
  ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek board
  ARM: 5689/1: Update default config of HP Jornada 700-series machines
  ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem
  ARM: 5688/1: ks8695_serial: disable_irq() lockup
  ARM: 5687/1: fix an oops with highmem
  ARM: 5684/1: Add nuc960 platform to w90x900
  ARM: 5683/1: Add nuc950 platform to w90x900
  ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platform
  ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driver
  ARM: 5625/1: fix hard coded 4K resource size in amba bus detection
  MMC: MMCI: convert realview MMC to use gpiolib
  ARM: 5685/1: Make MMCI driver compile without gpiolib
  ARM: implement highpte
  ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ
  ...

Fix up trivial conflict in arch/arm/kernel/signal.c.

It was due to the TIF_NOTIFY_RESUME addition in commit d0420c83 ("KEYS:
Extend TIF_NOTIFY_RESUME to (almost) all architectures") and follow-ups.
parents 2195d281 87d721ad

Documentation/arm/Samsung-S3C24XX/CPUfreq.txt

0 → 100644
+75 −0
Original line number Diff line number Diff line 
		S3C24XX CPUfreq support

		=======================



Introduction

------------



 The S3C24XX series support a number of power saving systems, such as

 the ability to change the core, memory and peripheral operating

 frequencies. The core control is exported via the CPUFreq driver

 which has a number of different manual or automatic controls over the

 rate the core is running at.



 There are two forms of the driver depending on the specific CPU and

 how the clocks are arranged. The first implementation used as single

 PLL to feed the ARM, memory and peripherals via a series of dividers

 and muxes and this is the implementation that is documented here. A

 newer version where there is a seperate PLL and clock divider for the

 ARM core is available as a seperate driver.





Layout

------



 The code core manages the CPU specific drivers, any data that they

 need to register and the interface to the generic drivers/cpufreq

 system. Each CPU registers a driver to control the PLL, clock dividers

 and anything else associated with it. Any board that wants to use this

 framework needs to supply at least basic details of what is required.



 The core registers with drivers/cpufreq at init time if all the data

 necessary has been supplied.





CPU support

-----------



 The support for each CPU depends on the facilities provided by the

 SoC and the driver as each device has different PLL and clock chains

 associated with it.





Slow Mode

---------



 The SLOW mode where the PLL is turned off altogether and the

 system is fed by the external crystal input is currently not

 supported.





sysfs

-----



 The core code exports extra information via sysfs in the directory

 devices/system/cpu/cpu0/arch-freq.





Board Support

-------------



 Each board that wants to use the cpufreq code must register some basic

 information with the core driver to provide information about what the

 board requires and any restrictions being placed on it.



 The board needs to supply information about whether it needs the IO bank

 timings changing, any maximum frequency limits and information about the

 SDRAM refresh rate.









Document Author

---------------



Ben Dooks, Copyright 2009 Simtec Electronics

Licensed under GPLv2

MAINTAINERS

+33 −1
Original line number Diff line number Diff line
@@ -534,10 +534,30 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) 
W:	http://maxim.org.za/at91_26.html

S:	Maintained



ARM/BCMRING ARM ARCHITECTURE

M:	Leo Chen <leochen@broadcom.com>

M:	Scott Branden <sbranden@broadcom.com>

L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)

S:	Maintained

F:	arch/arm/mach-bcmring



ARM/BCMRING MTD NAND DRIVER

M:	Leo Chen <leochen@broadcom.com>

M:	Scott Branden <sbranden@broadcom.com>

L:	linux-mtd@lists.infradead.org

S:	Maintained

F:	drivers/mtd/nand/bcm_umi_nand.c

F:	drivers/mtd/nand/bcm_umi_bch.c

F:	drivers/mtd/nand/bcm_umi_hamming.c

F:	drivers/mtd/nand/nand_bcm_umi.h



ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE

M:	Lennert Buytenhek <kernel@wantstofly.org>

M:	Hartley Sweeten <hsweeten@visionengravers.com>

M:	Ryan Mallon <ryan@bluewatersys.com>

L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)

S:	Maintained

F:	arch/arm/mach-ep93xx/

F:	arch/arm/mach-ep93xx/include/mach/



ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT

M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -685,6 +705,18 @@ ARM/MAGICIAN MACHINE SUPPORT 
M:	Philipp Zabel <philipp.zabel@gmail.com>

S:	Maintained



ARM/Marvell Loki/Kirkwood/MV78xx0/Orion SOC support

M:	Lennert Buytenhek <buytenh@marvell.com>

M:	Nicolas Pitre <nico@marvell.com>

L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)

T:	git git://git.marvell.com/orion

S:	Maintained

F:	arch/arm/mach-loki/

F:	arch/arm/mach-kirkwood/

F:	arch/arm/mach-mv78xx0/

F:	arch/arm/mach-orion5x/

F:	arch/arm/plat-orion/



ARM/MIOA701 MACHINE SUPPORT

M:	Robert Jarzmik <robert.jarzmik@free.fr>

L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)

arch/arm/Kconfig

+144 −120
Original line number Diff line number Diff line
@@ -46,10 +46,6 @@ config GENERIC_CLOCKEVENTS_BROADCAST 
	depends on GENERIC_CLOCKEVENTS

	default y if SMP && !LOCAL_TIMERS



config MMU

	bool

	default y



config NO_IOPORT

	bool
@@ -126,6 +122,13 @@ config ARCH_HAS_ILOG2_U32 
config ARCH_HAS_ILOG2_U64

	bool



config ARCH_HAS_CPUFREQ

	bool

	help

	  Internal node to signify that the ARCH has CPUFREQ support

	  and that the relevant menu configurations are displayed for

	  it.



config GENERIC_HWEIGHT

	bool

	default y
@@ -188,6 +191,13 @@ source "kernel/Kconfig.freezer" 


menu "System Type"



config MMU

	bool "MMU-based Paged Memory Management Support"

	default y

	help

	  Select if you want MMU-based virtualised addressing space

	  support by paged memory management. If unsure, say 'Y'.



choice

	prompt "ARM system type"

	default ARCH_VERSATILE
@@ -203,6 +213,7 @@ config ARCH_AAEC2000 
config ARCH_INTEGRATOR

	bool "ARM Ltd. Integrator family"

	select ARM_AMBA

	select ARCH_HAS_CPUFREQ

	select HAVE_CLK

	select COMMON_CLKDEV

	select ICST525
@@ -217,6 +228,7 @@ config ARCH_REALVIEW 
	select ICST307

	select GENERIC_TIME

	select GENERIC_CLOCKEVENTS

	select ARCH_WANT_OPTIONAL_GPIOLIB

	help

	  This enables support for ARM Ltd RealView boards.
@@ -229,6 +241,7 @@ config ARCH_VERSATILE 
	select ICST307

	select GENERIC_TIME

	select GENERIC_CLOCKEVENTS

	select ARCH_WANT_OPTIONAL_GPIOLIB

	help

	  This enables support for ARM Ltd Versatile board.
@@ -327,6 +340,20 @@ config ARCH_H720X 
	help

	  This enables support for systems based on the Hynix HMS720x



config ARCH_NOMADIK

	bool "STMicroelectronics Nomadik"

	select ARM_AMBA

	select ARM_VIC

	select CPU_ARM926T

	select HAVE_CLK

	select COMMON_CLKDEV

	select GENERIC_TIME

	select GENERIC_CLOCKEVENTS

	select GENERIC_GPIO

	select ARCH_REQUIRE_GPIOLIB

	help

	  Support for the Nomadik platform by ST-Ericsson



config ARCH_IOP13XX

	bool "IOP13xx-based"

	depends on MMU
@@ -493,10 +520,18 @@ config ARCH_W90X900 
	select CPU_ARM926T

	select ARCH_REQUIRE_GPIOLIB

	select GENERIC_GPIO

	select HAVE_CLK

	select COMMON_CLKDEV

	select GENERIC_TIME

	select GENERIC_CLOCKEVENTS

	help

		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You

		can login www.mcuos.com or www.nuvoton.com to know more.

	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,

	  At present, the w90x900 has been renamed nuc900, regarding

	  the ARM series product line, you can login the following

	  link address to know more.



	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/

		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>



config ARCH_PNX4008

	bool "Philips Nexperia PNX4008 Mobile"
@@ -509,6 +544,7 @@ config ARCH_PXA 
	bool "PXA2xx/PXA3xx-based"

	depends on MMU

	select ARCH_MTD_XIP

	select ARCH_HAS_CPUFREQ

	select GENERIC_GPIO

	select HAVE_CLK

	select COMMON_CLKDEV
@@ -551,6 +587,7 @@ config ARCH_SA1100 
	select ISA

	select ARCH_SPARSEMEM_ENABLE

	select ARCH_MTD_XIP

	select ARCH_HAS_CPUFREQ

	select GENERIC_GPIO

	select GENERIC_TIME

	select GENERIC_CLOCKEVENTS
@@ -563,6 +600,7 @@ config ARCH_SA1100 
config ARCH_S3C2410

	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"

	select GENERIC_GPIO

	select ARCH_HAS_CPUFREQ

	select HAVE_CLK

	help

	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -573,9 +611,18 @@ config ARCH_S3C64XX 
	bool "Samsung S3C64XX"

	select GENERIC_GPIO

	select HAVE_CLK

	select ARCH_HAS_CPUFREQ

	help

	  Samsung S3C64XX series based systems



config ARCH_S5PC1XX

	bool "Samsung S5PC1XX"

	select GENERIC_GPIO

	select HAVE_CLK

	select CPU_V7

	help

	  Samsung S5PC1XX series based systems



config ARCH_SHARK

	bool "Shark"

	select CPU_SA110
@@ -632,11 +679,24 @@ config ARCH_OMAP 
	select GENERIC_GPIO

	select HAVE_CLK

	select ARCH_REQUIRE_GPIOLIB

	select ARCH_HAS_CPUFREQ

	select GENERIC_TIME

	select GENERIC_CLOCKEVENTS

	help

	  Support for TI's OMAP platform (OMAP1 and OMAP2).



config ARCH_BCMRING

	bool "Broadcom BCMRING"

	depends on MMU

	select CPU_V6

	select ARM_AMBA

	select COMMON_CLKDEV

	select GENERIC_TIME

	select GENERIC_CLOCKEVENTS

	select ARCH_WANT_OPTIONAL_GPIOLIB

	help

	  Support for Broadcom's BCMRing platform.



endchoice



source "arch/arm/mach-clps711x/Kconfig"
@@ -685,6 +745,7 @@ source "arch/arm/mach-kirkwood/Kconfig" 
source "arch/arm/plat-s3c24xx/Kconfig"

source "arch/arm/plat-s3c64xx/Kconfig"

source "arch/arm/plat-s3c/Kconfig"

source "arch/arm/plat-s5pc1xx/Kconfig"



if ARCH_S3C2410

source "arch/arm/mach-s3c2400/Kconfig"
@@ -702,6 +763,10 @@ endif 


source "arch/arm/plat-stmp3xxx/Kconfig"



if ARCH_S5PC1XX

source "arch/arm/mach-s5pc100/Kconfig"

endif



source "arch/arm/mach-lh7a40x/Kconfig"



source "arch/arm/mach-h720x/Kconfig"
@@ -716,6 +781,8 @@ source "arch/arm/mach-at91/Kconfig" 


source "arch/arm/plat-mxc/Kconfig"



source "arch/arm/mach-nomadik/Kconfig"



source "arch/arm/mach-netx/Kconfig"



source "arch/arm/mach-ns9xxx/Kconfig"
@@ -730,6 +797,8 @@ source "arch/arm/mach-u300/Kconfig" 


source "arch/arm/mach-w90x900/Kconfig"



source "arch/arm/mach-bcmring/Kconfig"



# Definitions to make life easier

config ARCH_ACORN

	bool
@@ -962,18 +1031,7 @@ config LOCAL_TIMERS 
	  accounting to be spread across the timer interval, preventing a

	  "thundering herd" at every timer tick.



config PREEMPT

	bool "Preemptible Kernel (EXPERIMENTAL)"

	depends on EXPERIMENTAL

	help

	  This option reduces the latency of the kernel when reacting to

	  real-time or interactive events by allowing a low priority process to

	  be preempted even if it is in kernel mode executing a system call.

	  This allows applications to run more reliably even when the system is

	  under load.



	  Say Y here if you are building a kernel for a desktop, embedded

	  or real-time system.  Say N if you are unsure.

source kernel/Kconfig.preempt



config HZ

	int
@@ -983,6 +1041,21 @@ config HZ 
	default AT91_TIMER_HZ if ARCH_AT91

	default 100



config THUMB2_KERNEL

	bool "Compile the kernel in Thumb-2 mode"

	depends on CPU_V7 && EXPERIMENTAL

	select AEABI

	select ARM_ASM_UNIFIED

	help

	  By enabling this option, the kernel will be compiled in

	  Thumb-2 mode. A compiler/assembler that understand the unified

	  ARM-Thumb syntax is needed.



	  If unsure, say N.



config ARM_ASM_UNIFIED

	bool



config AEABI

	bool "Use the ARM EABI to compile the kernel"

	help
@@ -1054,6 +1127,11 @@ config HIGHMEM 


	  If unsure, say n.



config HIGHPTE

	bool "Allocate 2nd-level pagetables from highmem"

	depends on HIGHMEM

	depends on !OUTER_CACHE



source "mm/Kconfig"



config LEDS
@@ -1241,7 +1319,7 @@ endmenu 


menu "CPU Power Management"



if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)

if ARCH_HAS_CPUFREQ



source "drivers/cpufreq/Kconfig"
@@ -1276,6 +1354,52 @@ config CPU_FREQ_S3C64XX 
	bool "CPUfreq support for Samsung S3C64XX CPUs"

	depends on CPU_FREQ && CPU_S3C6410



config CPU_FREQ_S3C

	bool

	help

	  Internal configuration node for common cpufreq on Samsung SoC



config CPU_FREQ_S3C24XX

	bool "CPUfreq driver for Samsung S3C24XX series CPUs"

	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL

	select CPU_FREQ_S3C

	help

	  This enables the CPUfreq driver for the Samsung S3C24XX family

	  of CPUs.



	  For details, take a look at <file:Documentation/cpu-freq>.



	  If in doubt, say N.



config CPU_FREQ_S3C24XX_PLL

	bool "Support CPUfreq changing of PLL frequency"

	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL

	help

	  Compile in support for changing the PLL frequency from the

	  S3C24XX series CPUfreq driver. The PLL takes time to settle

	  after a frequency change, so by default it is not enabled.



	  This also means that the PLL tables for the selected CPU(s) will

	  be built which may increase the size of the kernel image.



config CPU_FREQ_S3C24XX_DEBUG

	bool "Debug CPUfreq Samsung driver core"

	depends on CPU_FREQ_S3C24XX

	help

	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core



config CPU_FREQ_S3C24XX_IODEBUG

	bool "Debug CPUfreq Samsung driver IO timing"

	depends on CPU_FREQ_S3C24XX

	help

	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core



config CPU_FREQ_S3C24XX_DEBUGFS

	bool "Export debugfs for CPUFreq"

	depends on CPU_FREQ_S3C24XX && DEBUG_FS

	help

	  Export status information via debugfs.



endif



source "drivers/cpuidle/Kconfig"
@@ -1377,107 +1501,7 @@ endmenu 


source "net/Kconfig"



menu "Device Drivers"



source "drivers/base/Kconfig"



source "drivers/connector/Kconfig"



if ALIGNMENT_TRAP || !CPU_CP15_MMU

source "drivers/mtd/Kconfig"

endif



source "drivers/parport/Kconfig"



source "drivers/pnp/Kconfig"



source "drivers/block/Kconfig"



# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4



source "drivers/misc/Kconfig"



source "drivers/ide/Kconfig"



source "drivers/scsi/Kconfig"



source "drivers/ata/Kconfig"



source "drivers/md/Kconfig"



source "drivers/message/fusion/Kconfig"



source "drivers/ieee1394/Kconfig"



source "drivers/message/i2o/Kconfig"



source "drivers/net/Kconfig"



source "drivers/isdn/Kconfig"



# input before char - char/joystick depends on it. As does USB.



source "drivers/input/Kconfig"



source "drivers/char/Kconfig"



source "drivers/i2c/Kconfig"



source "drivers/spi/Kconfig"



source "drivers/gpio/Kconfig"



source "drivers/w1/Kconfig"



source "drivers/power/Kconfig"



source "drivers/hwmon/Kconfig"



source "drivers/thermal/Kconfig"



source "drivers/watchdog/Kconfig"



source "drivers/ssb/Kconfig"



#source "drivers/l3/Kconfig"



source "drivers/mfd/Kconfig"



source "drivers/media/Kconfig"



source "drivers/video/Kconfig"



source "sound/Kconfig"



source "drivers/hid/Kconfig"



source "drivers/usb/Kconfig"



source "drivers/uwb/Kconfig"



source "drivers/mmc/Kconfig"



source "drivers/memstick/Kconfig"



source "drivers/accessibility/Kconfig"



source "drivers/leds/Kconfig"



source "drivers/rtc/Kconfig"



source "drivers/dma/Kconfig"



source "drivers/dca/Kconfig"



source "drivers/auxdisplay/Kconfig"



source "drivers/regulator/Kconfig"



source "drivers/uio/Kconfig"



source "drivers/staging/Kconfig"



endmenu

source "drivers/Kconfig"



source "fs/Kconfig"

arch/arm/Kconfig.debug

+1 −0
Original line number Diff line number Diff line
@@ -8,6 +8,7 @@ source "lib/Kconfig.debug" 
# n, but then RMK will have to kill you ;).

config FRAME_POINTER

	bool

	depends on !THUMB2_KERNEL

	default y if !ARM_UNWIND

	help

	  If you say N here, the resulting kernel will be slightly smaller and

arch/arm/Makefile

+15 −2
Original line number Diff line number Diff line
@@ -93,9 +93,16 @@ ifeq ($(CONFIG_ARM_UNWIND),y) 
CFLAGS_ABI	+=-funwind-tables

endif



ifeq ($(CONFIG_THUMB2_KERNEL),y)

AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)

AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)

CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)

AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb

endif



# Need -Uarm for gcc < 3.x

KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm

KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float

KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm

KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float



CHECKFLAGS	+= -D__arm__
@@ -112,6 +119,7 @@ endif 
# by CONFIG_* macro name.

machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000

machine-$(CONFIG_ARCH_AT91)		:= at91

machine-$(CONFIG_ARCH_BCMRING)		:= bcmring

machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x

machine-$(CONFIG_ARCH_DAVINCI)		:= davinci

machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
@@ -135,8 +143,10 @@ machine-$(CONFIG_ARCH_MSM) := msm 
machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0

machine-$(CONFIG_ARCH_MX1)		:= mx1

machine-$(CONFIG_ARCH_MX2)		:= mx2

machine-$(CONFIG_ARCH_MX25)		:= mx25

machine-$(CONFIG_ARCH_MX3)		:= mx3

machine-$(CONFIG_ARCH_NETX)		:= netx

machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik

machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx

machine-$(CONFIG_ARCH_OMAP1)		:= omap1

machine-$(CONFIG_ARCH_OMAP2)		:= omap2
@@ -150,6 +160,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc 
machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443

machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0

machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410

machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100

machine-$(CONFIG_ARCH_SA1100)		:= sa1100

machine-$(CONFIG_ARCH_SHARK)		:= shark

machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
@@ -158,6 +169,7 @@ machine-$(CONFIG_ARCH_U300) := u300 
machine-$(CONFIG_ARCH_VERSATILE)	:= versatile

machine-$(CONFIG_ARCH_W90X900)		:= w90x900

machine-$(CONFIG_FOOTBRIDGE)		:= footbridge

machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231



# Platform directory name.  This list is sorted alphanumerically

# by CONFIG_* macro name.
@@ -168,6 +180,7 @@ plat-$(CONFIG_PLAT_ORION) := orion 
plat-$(CONFIG_PLAT_PXA)		:= pxa

plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c

plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c

plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c

plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx



ifeq ($(CONFIG_ARCH_EBSA110),y)

CRA Git | Maintained and supported by SUSTech CRA and CCSE