Merge tag 'asoc-v4.16' of... (2c82e8ea) · Commits · 戴 / test

Documentation/admin-guide/kernel-parameters.rst

+1 −0

Original line number	Diff line number	Diff line
		@@ -109,6 +109,7 @@ parameter is applicable::
		IPV6 IPv6 support is enabled.
		ISAPNP ISA PnP code is enabled.
		ISDN Appropriate ISDN support is enabled.
		ISOL CPU Isolation is enabled.
		JOY Appropriate joystick support is enabled.
		KGDB Kernel debugger support is enabled.
		KVM Kernel Virtual Machine support is enabled.

Documentation/admin-guide/kernel-parameters.txt

+15 −3

Original line number	Diff line number	Diff line
		@@ -328,11 +328,15 @@
		not play well with APC CPU idle - disable it if you have
		APC and your system crashes randomly.

		apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
		apic= [APIC,X86] Advanced Programmable Interrupt Controller
		Change the output verbosity whilst booting
		Format: { quiet (default) \| verbose \| debug }
		Change the amount of debugging information output
		when initialising the APIC and IO-APIC components.
		For X86-32, this can also be used to specify an APIC
		driver name.
		Format: apic=driver_name
		Examples: apic=bigsmp

		apic_extnmi= [APIC,X86] External NMI delivery setting
		Format: { bsp (default) \| all \| none }
		@@ -1737,7 +1741,7 @@
		isapnp= [ISAPNP]
		Format: <RDP>,<reset>,<pci_scan>,<verbosity>

		isolcpus= [KNL,SMP] Isolate a given set of CPUs from disturbance.
		isolcpus= [KNL,SMP,ISOL] Isolate a given set of CPUs from disturbance.
		[Deprecated - use cpusets instead]
		Format: [flag-list,]<cpu-list>

		@@ -2662,7 +2666,7 @@
		Valid arguments: on, off
		Default: on

		nohz_full= [KNL,BOOT]
		nohz_full= [KNL,BOOT,SMP,ISOL]
		The argument is a cpu list, as described above.
		In kernels built with CONFIG_NO_HZ_FULL=y, set
		the specified list of CPUs whose tick will be stopped
		@@ -2708,6 +2712,8 @@
		steal time is computed, but won't influence scheduler
		behaviour

		nopti [X86-64] Disable kernel page table isolation

		nolapic [X86-32,APIC] Do not enable or use the local APIC.

		nolapic_timer [X86-32,APIC] Do not use the local APIC timer.
		@@ -3282,6 +3288,12 @@
		pt. [PARIDE]
		See Documentation/blockdev/paride.txt.

		pti= [X86_64]
		Control user/kernel address space isolation:
		on - enable
		off - disable
		auto - default setting

		pty.legacy_count=
		[KNL] Number of legacy pty's. Overwrites compiled-in
		default number.

Documentation/admin-guide/thunderbolt.rst

+1 −1

Original line number	Diff line number	Diff line
		@@ -230,7 +230,7 @@ If supported by your machine this will be exposed by the WMI bus with
		a sysfs attribute called "force_power".

		For example the intel-wmi-thunderbolt driver exposes this attribute in:
		/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
		/sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power

		To force the power to on, write 1 to this attribute file.
		To disable force power, write 0 to this attribute file.

Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt

+0 −2

Original line number	Diff line number	Diff line
		@@ -13,7 +13,6 @@ Required properties:
		at25df321a
		at25df641
		at26df081a
		en25s64
		mr25h128
		mr25h256
		mr25h10
		@@ -33,7 +32,6 @@ Required properties:
		s25fl008k
		s25fl064k
		sst25vf040b
		sst25wf040b
		m25p40
		m25p80
		m25p16

Documentation/devicetree/bindings/sound/max98373.txt

0 → 100644

+40 −0

Original line number	Diff line number	Diff line
		Maxim Integrated MAX98373 Speaker Amplifier

		This device supports I2C.

		Required properties:

		- compatible : "maxim,max98373"

		- reg : the I2C address of the device.

		Optional properties:

		- maxim,vmon-slot-no : slot number used to send voltage information
		or in inteleave mode this will be used as
		interleave slot.
		slot range : 0 ~ 15, Default : 0

		- maxim,imon-slot-no : slot number used to send current information
		slot range : 0 ~ 15, Default : 0

		- maxim,spkfb-slot-no : slot number used to send speaker feedback information
		slot range : 0 ~ 15, Default : 0

		- maxim,interleave-mode : For cases where a single combined channel
		for the I/V sense data is not sufficient, the device can also be configured
		to share a single data output channel on alternating frames.
		In this configuration, the current and voltage data will be frame interleaved
		on a single output channel.
		Boolean, define to enable the interleave mode, Default : false

		Example:

		codec: max98373@31 {
		compatible = "maxim,max98373";
		reg = <0x31>;
		maxim,vmon-slot-no = <0>;
		maxim,imon-slot-no = <1>;
		maxim,spkfb-slot-no = <2>;
		maxim,interleave-mode;
		};

Admin message