sh: mach-x3proto: gpio-keys support. (2c237329) · Commits · 戴 / test

arch/sh/boards/mach-x3proto/setup.c

+105 −2

Original line number	Diff line number	Diff line
		/*
		* arch/sh/boards/renesas/x3proto/setup.c
		* arch/sh/boards/mach-x3proto/setup.c
		*
		* Renesas SH-X3 Prototype Board Support.
		*
		* Copyright (C) 2007 - 2008 Paul Mundt
		* Copyright (C) 2007 - 2010 Paul Mundt
		*
		* This file is subject to the terms and conditions of the GNU General Public
		* License. See the file "COPYING" in the main directory of this archive
		@@ -16,9 +16,13 @@
		#include <linux/smc91x.h>
		#include <linux/irq.h>
		#include <linux/interrupt.h>
		#include <linux/input.h>
		#include <linux/usb/r8a66597.h>
		#include <linux/usb/m66592.h>
		#include <linux/gpio.h>
		#include <linux/gpio_keys.h>
		#include <mach/ilsel.h>
		#include <mach/hardware.h>
		#include <asm/smp-ops.h>

		static struct resource heartbeat_resources[] = {
		@@ -122,11 +126,95 @@ static struct platform_device m66592_usb_peripheral_device = {
		.resource = m66592_usb_peripheral_resources,
		};

		static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = {
		{
		.desc = "key44",
		.code = KEY_POWER,
		.active_low = 1,
		.wakeup = 1,
		}, {
		.desc = "key43",
		.code = KEY_SUSPEND,
		.active_low = 1,
		.wakeup = 1,
		}, {
		.desc = "key42",
		.code = KEY_KATAKANAHIRAGANA,
		.active_low = 1,
		}, {
		.desc = "key41",
		.code = KEY_SWITCHVIDEOMODE,
		.active_low = 1,
		}, {
		.desc = "key34",
		.code = KEY_F12,
		.active_low = 1,
		}, {
		.desc = "key33",
		.code = KEY_F11,
		.active_low = 1,
		}, {
		.desc = "key32",
		.code = KEY_F10,
		.active_low = 1,
		}, {
		.desc = "key31",
		.code = KEY_F9,
		.active_low = 1,
		}, {
		.desc = "key24",
		.code = KEY_F8,
		.active_low = 1,
		}, {
		.desc = "key23",
		.code = KEY_F7,
		.active_low = 1,
		}, {
		.desc = "key22",
		.code = KEY_F6,
		.active_low = 1,
		}, {
		.desc = "key21",
		.code = KEY_F5,
		.active_low = 1,
		}, {
		.desc = "key14",
		.code = KEY_F4,
		.active_low = 1,
		}, {
		.desc = "key13",
		.code = KEY_F3,
		.active_low = 1,
		}, {
		.desc = "key12",
		.code = KEY_F2,
		.active_low = 1,
		}, {
		.desc = "key11",
		.code = KEY_F1,
		.active_low = 1,
		},
		};

		static struct gpio_keys_platform_data baseboard_buttons_data = {
		.buttons = baseboard_buttons,
		.nbuttons = ARRAY_SIZE(baseboard_buttons),
		};

		static struct platform_device baseboard_buttons_device = {
		.name = "gpio-keys",
		.id = -1,
		.dev = {
		.platform_data = &baseboard_buttons_data,
		},
		};

		static struct platform_device *x3proto_devices[] __initdata = {
		&heartbeat_device,
		&smc91x_device,
		&r8a66597_usb_host_device,
		&m66592_usb_peripheral_device,
		&baseboard_buttons_device,
		};

		static void __init x3proto_init_irq(void)
		@@ -139,12 +227,27 @@ static void __init x3proto_init_irq(void)

		static int __init x3proto_devices_setup(void)
		{
		int ret, i;

		/*
		* IRLs are only needed for ILSEL mappings, so flip over the INTC
		* pins at a later point to enable the GPIOs to settle.
		*/
		x3proto_init_irq();

		/*
		* Now that ILSELs are available, set up the baseboard GPIOs.
		*/
		ret = x3proto_gpio_setup();
		if (unlikely(ret))
		return ret;

		/*
		* Propagate dynamic GPIOs for the baseboard button device.
		*/
		for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++)
		baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;

		r8a66597_usb_host_resources[1].start =
		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);

Admin message