dt-bindings: net: Restore sun8i dwmac binding

* Allwinner sun8i GMAC ethernet controller

This device is a platform glue layer for stmmac.

Please see stmmac.txt for the other unchanged properties.

Required properties:

- compatible: should be one of the following string:

		"allwinner,sun8i-a83t-emac"

		"allwinner,sun8i-h3-emac"

		"allwinner,sun8i-v3s-emac"

		"allwinner,sun50i-a64-emac"

- reg: address and length of the register for the device.

- interrupts: interrupt for the device

- interrupt-names: should be "macirq"

- clocks: A phandle to the reference clock for this device

- clock-names: should be "stmmaceth"

- resets: A phandle to the reset control for this device

- reset-names: should be "stmmaceth"

- phy-mode: See ethernet.txt

- phy-handle: See ethernet.txt

- #address-cells: shall be 1

- #size-cells: shall be 0

- syscon: A phandle to the syscon of the SoC with one of the following

 compatible string:

  - allwinner,sun8i-h3-system-controller

  - allwinner,sun8i-v3s-system-controller

  - allwinner,sun50i-a64-system-controller

  - allwinner,sun8i-a83t-system-controller

Optional properties:

- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0)

- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0)

Both delay properties need to be a multiple of 100. They control the delay for

external PHY.

Optional properties for the following compatibles:

  - "allwinner,sun8i-h3-emac",

  - "allwinner,sun8i-v3s-emac":

- allwinner,leds-active-low: EPHY LEDs are active low

Required child node of emac:

- mdio bus node: should be named mdio

Required properties of the mdio node:

- #address-cells: shall be 1

- #size-cells: shall be 0

The device node referenced by "phy" or "phy-handle" should be a child node

of the mdio node. See phy.txt for the generic PHY bindings.

Required properties of the phy node with the following compatibles:

  - "allwinner,sun8i-h3-emac",

  - "allwinner,sun8i-v3s-emac":

- clocks: a phandle to the reference clock for the EPHY

- resets: a phandle to the reset control for the EPHY

Example:

emac: ethernet@1c0b000 {

	compatible = "allwinner,sun8i-h3-emac";

	syscon = <&syscon>;

	reg = <0x01c0b000 0x104>;

	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;

	interrupt-names = "macirq";

	resets = <&ccu RST_BUS_EMAC>;

	reset-names = "stmmaceth";

	clocks = <&ccu CLK_BUS_EMAC>;

	clock-names = "stmmaceth";

	#address-cells = <1>;

	#size-cells = <0>;

	phy-handle = <&int_mii_phy>;

	phy-mode = "mii";

	allwinner,leds-active-low;

	mdio: mdio {

		#address-cells = <1>;

		#size-cells = <0>;

		int_mii_phy: ethernet-phy@1 {

			reg = <1>;

			clocks = <&ccu CLK_BUS_EPHY>;

			resets = <&ccu RST_BUS_EPHY>;

		};

	};

};