Commit 2ae61de9 authored by Jean Delvare's avatar Jean Delvare Committed by Jean Delvare
Browse files

hwmon: (w83795) Delay reading limit registers 



Wait until we need the limit register values, instead of pre-reading
them. This saves 544 ms on modprobe on my test system. Obviously this
time is added when first running "sensors" or any other monitoring
application, but I think it is better than slowing down the boot.

Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 0d7237bf

drivers/hwmon/w83795.c

+6 −1
Original line number Diff line number Diff line
@@ -371,6 +371,7 @@ struct w83795_data { 
	u8 beeps[6];		/* Register value */



	char valid;

	char valid_limits;

};



/*
@@ -498,6 +499,8 @@ static void w83795_update_limits(struct i2c_client *client) 
	/* Read beep settings */

	for (i = 0; i < ARRAY_SIZE(data->beeps); i++)

		data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));



	data->valid_limits = 1;

}



static void w83795_update_pwm_config(struct i2c_client *client)
@@ -564,6 +567,9 @@ static struct w83795_data *w83795_update_device(struct device *dev) 


	mutex_lock(&data->update_lock);



	if (!data->valid_limits)

		w83795_update_limits(client);



	if (!(time_after(jiffies, data->last_updated + HZ * 2)

	      || !data->valid))

		goto END;
@@ -2017,7 +2023,6 @@ static int w83795_probe(struct i2c_client *client, 
	}



	data->has_gain = w83795_read(client, W83795_REG_VMIGB_CTRL) & 0x0f;

	w83795_update_limits(client);



	/* pwm and smart fan */

	if (data->chip_type == w83795g)

CRA Git | Maintained and supported by SUSTech CRA and CCSE