Commit 2ab71a02 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by Ralf Baechle
Browse files

MIPS: BCM47xx: Move SPROM driver to drivers/firmware/ 



Broadcom ARM home routers store SPROM content in NVRAM just like MIPS
ones. To share SPROM code we need to move it out of arch/mips/ to some
common place. We already have bcm47xx_nvram in firmware path and SPROM
should fit there as well.
This driver is responsible for parsing SoC configuration data into a
struct shared between ssb and bcma buses.
This was tested with BCM4706 & BCM5357C0 (BCM47XX) and BCM4708A0
(ARCH_BCM_5301X).

Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12210/


Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent b11d0227

arch/mips/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -197,6 +197,7 @@ config BCM47XX 
	select GPIOLIB

	select LEDS_GPIO_REGISTER

	select BCM47XX_NVRAM

	select BCM47XX_SPROM

	help

	 Support for BCM47XX based boards

arch/mips/bcm47xx/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -3,5 +3,5 @@ 
# under Linux.

#



obj-y				+= irq.o prom.o serial.o setup.o time.o sprom.o

obj-y				+= irq.o prom.o serial.o setup.o time.o

obj-y				+= board.o buttons.o leds.o workarounds.o

arch/mips/bcm47xx/bcm47xx_private.h

+0 −3
Original line number Diff line number Diff line
@@ -10,9 +10,6 @@ 
/* prom.c */

void __init bcm47xx_prom_highmem_init(void);



/* sprom.c */

void bcm47xx_sprom_register_fallbacks(void);



/* buttons.c */

int __init bcm47xx_buttons_register(void);

arch/mips/bcm47xx/setup.c

+1 −1
Original line number Diff line number Diff line
@@ -28,6 +28,7 @@ 


#include "bcm47xx_private.h"



#include <linux/bcm47xx_sprom.h>

#include <linux/export.h>

#include <linux/types.h>

#include <linux/ethtool.h>
@@ -151,7 +152,6 @@ void __init plat_mem_setup(void) 
		pr_info("Using bcma bus\n");

#ifdef CONFIG_BCM47XX_BCMA

		bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;

		bcm47xx_sprom_register_fallbacks();

		bcm47xx_register_bcma();

		bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);

#ifdef CONFIG_HIGHMEM

drivers/firmware/broadcom/Kconfig

+11 −0
Original line number Diff line number Diff line
@@ -9,3 +9,14 @@ config BCM47XX_NVRAM 
	  This driver provides an easy way to get value of requested parameter.

	  It simply reads content of NVRAM and parses it. It doesn't control any

	  hardware part itself.



config BCM47XX_SPROM

	bool "Broadcom SPROM driver"

	depends on BCM47XX_NVRAM

	help

	  Broadcom devices store configuration data in SPROM. Accessing it is

	  specific to the bus host type, e.g. PCI(e) devices have it mapped in

	  a PCI BAR.

	  In case of SoC devices SPROM content is stored on a flash used by

	  bootloader firmware CFE. This driver provides method to ssb and bcma

	  drivers to read SPROM on SoC.

CRA Git | Maintained and supported by SUSTech CRA and CCSE