regulator: 88pg86x: add DT bindings document (2a254de2) · Commits · 戴 / test

The only device-specific node names are "buck1" and "buck2" for the two regulators present on the device. Sleep mode GPIO and per-regulator GPIO enable pins are not exposed (the driver does not support them either). Signed-off-by:

Alexander Monakov <amonakov@ispras.ru> Signed-off-by:

Mark Brown <broonie@kernel.org>

Documentation/devicetree/bindings/regulator/88pg86x.txt

0 → 100644

+22 −0

Original line number	Diff line number	Diff line
		Marvell 88PG867/88PG868 voltage regulators

		Required properties:
		- compatible: one of "marvell,88pg867", "marvell,88pg868";
		- reg: I2C slave address.

		Optional subnodes for regulators: "buck1", "buck2", using common regulator
		bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>.

		Example:

		pg868@19 {
		compatible = "marvell,88pg868";
		reg = <0x19>;

		vcpu: buck1 {
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <1000000>;
		regulator-max-microvolt = <1350000>;
		};
		};

Admin message