ARM: dts: rockchip: Add SDIO0 node for VMARC SOM (29952fea) · Commits · 戴 / test

arch/arm/boot/dts/rk3288-vmarc-som.dtsi

+17 −0

Original line number	Diff line number	Diff line
		@@ -258,6 +258,7 @@
		gpio1830-supply = <&vcc_18>;
		gpio30-supply = <&vcc_io>;
		sdcard-supply = <&vccio_sd>;
		wifi-supply = <&vcc_wl>;
		status = "okay";
		};

		@@ -283,6 +284,12 @@
		};
		};

		sdio-pwrseq {
		wifi_enable_h: wifi-enable-h {
		rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
		};

		sdmmc {
		sdmmc_bus4: sdmmc-bus4 {
		rockchip,pins =
		@@ -314,6 +321,16 @@
		};
		};

		&sdio_pwrseq {
		/*
		* On the module itself this is one of these (depending
		* on the actual card populated):
		* - SDIO_RESET_L_WL_REG_ON
		* - PDN (power down when low)
		*/
		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; /* WIFI_REG_ON */
		};

		&usbphy {
		status = "okay";
		};

+21 −0

Original line number	Diff line number	Diff line
		@@ -15,6 +15,14 @@
		#clock-cells = <0>;
		};

		sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&hym8563>;
		clock-names = "ext_clock";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_enable_h>;
		};

		vcc12v_dcin: vcc12v-dcin-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc12v_dcin";
		@@ -78,6 +86,19 @@
		status = "okay";
		};

		&sdio0 {
		bus-width = <4>;
		cap-sd-highspeed;
		cap-sdio-irq;
		keep-power-in-suspend;
		mmc-pwrseq = <&sdio_pwrseq>;
		non-removable;
		pinctrl-names = "default";
		pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
		sd-uhs-sdr104;
		status = "okay";
		};

		&sdmmc {
		bus-width = <4>;
		cap-mmc-highspeed;

+16 −0

Original line number	Diff line number	Diff line
		@@ -353,6 +353,12 @@
		};
		};

		sdio-pwrseq {
		wifi_enable_h: wifi-enable-h {
		rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
		};

		vbus_host {
		usb1_en_oc: usb1-en-oc {
		rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
		@@ -371,6 +377,16 @@
		pmu1830-supply = <&vcc_1v8>;
		};

		&sdio_pwrseq {
		/*
		* On the module itself this is one of these (depending
		* on the actual card populated):
		* - SDIO_RESET_L_WL_REG_ON
		* - PDN (power down when low)
		*/
		reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
		};

		&sdhci {
		bus-width = <8>;
		mmc-hs400-1_8v;