Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding (28c1b08d) · Commits · 戴 / test

Device tree binding information for DA9062 and DA9061 thermal junction temperature monitor. Binding descriptions for the DA9061 and DA9062 thermal TJUNC supervisor device driver, using a single THERMAL_TRIP_HOT trip-wire and allowing for a configurable polling period for over-temperature polling. This patch also adds two examples, one for DA9062 and one for DA9061. The DA9061 example uses a fall-back compatible string for the DA9062. Acked-by:

Rob Herring <robh@kernel.org> Signed-off-by:

Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:

Eduardo Valentin <edubezval@gmail.com>

Documentation/devicetree/bindings/thermal/da9062-thermal.txt

0 → 100644

+36 −0

Original line number	Diff line number	Diff line
		* Dialog DA9062/61 TJUNC Thermal Module

		This module is part of the DA9061/DA9062. For more details about entire
		DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt

		Junction temperature thermal module uses an interrupt signal to identify
		high THERMAL_TRIP_HOT temperatures for the PMIC device.

		Required properties:

		- compatible: should be one of the following valid compatible string lines:
		"dlg,da9061-thermal", "dlg,da9062-thermal"
		"dlg,da9062-thermal"

		Optional properties:

		- polling-delay-passive : Specify the polling period, measured in
		milliseconds, between thermal zone device update checks.

		Example: DA9062

		pmic0: da9062@58 {
		thermal {
		compatible = "dlg,da9062-thermal";
		polling-delay-passive = <3000>;
		};
		};

		Example: DA9061 using a fall-back compatible for the DA9062 onkey driver

		pmic0: da9061@58 {
		thermal {
		compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
		polling-delay-passive = <3000>;
		};
		};

Admin message