USB: re-remove <linux/usb_sl811.h> (27f5d75a) · Commits · 戴 / test

arch/blackfin/mach-bf537/boards/generic_board.c

+1 −1

Original line number	Original line	Diff line number	Diff line
	@@ -40,7 +40,7 @@
	#include <linux/pata_platform.h>		#include <linux/pata_platform.h>
	#include <linux/irq.h>		#include <linux/irq.h>
	#include <linux/interrupt.h>		#include <linux/interrupt.h>
	#include <linux/usb_sl811.h>		#include <linux/usb/sl811.h>
	#include <asm/dma.h>		#include <asm/dma.h>
	#include <asm/bfin5xx_spi.h>		#include <asm/bfin5xx_spi.h>
	#include <asm/reboot.h>		#include <asm/reboot.h>

+1 −1

+1 −1

Original line number	Original line	Diff line number	Diff line
	@@ -40,7 +40,7 @@
	#include <linux/pata_platform.h>		#include <linux/pata_platform.h>
	#include <linux/irq.h>		#include <linux/irq.h>
	#include <linux/interrupt.h>		#include <linux/interrupt.h>
	#include <linux/usb_sl811.h>		#include <linux/usb/sl811.h>
	#include <asm/dma.h>		#include <asm/dma.h>
	#include <asm/bfin5xx_spi.h>		#include <asm/bfin5xx_spi.h>
	#include <asm/reboot.h>		#include <asm/reboot.h>

deleted100644 → 0

+0 −26

Original line number	Original line	Diff line number	Diff line

	/*
	* board initialization should put one of these into dev->platform_data
	* and place the sl811hs onto platform_bus named "sl811-hcd".
	*/

	struct sl811_platform_data {
	unsigned can_wakeup:1;

	/* given port_power, msec/2 after power on till power good */
	u8 potpg;

	/* mA/2 power supplied on this port (max = default = 250) */
	u8 power;

	/* sl811 relies on an external source of VBUS current */
	void (port_power)(struct device dev, int is_on);

	/* pulse sl811 nRST (probably with a GPIO) */
	void (reset)(struct device dev);

	// some boards need something like these:
	// int (check_overcurrent)(struct device dev);
	// void (clock_enable)(struct device dev, int is_on);
	};