arm64: dts: qcom: sdm845: add slimbus nodes (27ca1de0) · Commits · 戴 / test

arch/arm64/boot/dts/qcom/sdm845.dtsi

+93 −0

Original line number	Diff line number	Diff line
		@@ -2651,6 +2651,87 @@
		status = "disabled";
		};

		slim: slim@171c0000 {
		compatible = "qcom,slim-ngd-v2.1.0";
		reg = <0 0x171c0000 0 0x2c000>;
		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;

		qcom,apps-ch-pipes = <0x780000>;
		qcom,ea-pc = <0x270>;
		status = "okay";
		dmas = <&slimbam 3>, <&slimbam 4>,
		<&slimbam 5>, <&slimbam 6>;
		dma-names = "rx", "tx", "tx2", "rx2";

		iommus = <&apps_smmu 0x1806 0x0>;
		#address-cells = <1>;
		#size-cells = <0>;

		ngd@1 {
		reg = <1>;
		#address-cells = <2>;
		#size-cells = <0>;

		wcd9340_ifd: ifd@0{
		compatible = "slim217,250";
		reg = <0 0>;
		};

		wcd9340: codec@1{
		compatible = "slim217,250";
		reg = <1 0>;
		slim-ifc-dev = <&wcd9340_ifd>;

		#sound-dai-cells = <1>;

		interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-controller;
		#interrupt-cells = <1>;

		#clock-cells = <0>;
		clock-frequency = <9600000>;
		clock-output-names = "mclk";
		qcom,micbias1-millivolt = <1800>;
		qcom,micbias2-millivolt = <1800>;
		qcom,micbias3-millivolt = <1800>;
		qcom,micbias4-millivolt = <1800>;

		#address-cells = <1>;
		#size-cells = <1>;

		wcdgpio: gpio-controller@42 {
		compatible = "qcom,wcd9340-gpio";
		gpio-controller;
		#gpio-cells = <2>;
		reg = <0x42 0x2>;
		};

		swm: swm@c85 {
		compatible = "qcom,soundwire-v1.3.0";
		reg = <0xc85 0x40>;
		interrupts-extended = <&wcd9340 20>;

		qcom,dout-ports = <6>;
		qcom,din-ports = <2>;
		qcom,ports-sinterval-low =/bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
		qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
		qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;

		#sound-dai-cells = <1>;
		clocks = <&wcd9340>;
		clock-names = "iface";
		#address-cells = <2>;
		#size-cells = <0>;


		};
		};
		};
		};

		sound: sound {
		};

		usb_1_hsphy: phy@88e2000 {
		compatible = "qcom,sdm845-qusb2-phy";
		reg = <0 0x088e2000 0 0x400>;
		@@ -3502,6 +3583,18 @@
		};
		};

		slimbam: dma@17184000 {
		compatible = "qcom,bam-v1.7.0";
		qcom,controlled-remotely;
		reg = <0 0x17184000 0 0x2a000>;
		num-channels = <31>;
		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
		#dma-cells = <1>;
		qcom,ee = <1>;
		qcom,num-ees = <2>;
		iommus = <&apps_smmu 0x1806 0x0>;
		};

		timer@17c90000 {
		#address-cells = <2>;
		#size-cells = <2>;

Admin message