Commit 27b7d5f3 authored by Afzal Mohammed's avatar Afzal Mohammed Committed by Nishanth Menon
Browse files

bus: omap_l3_noc: Add AM4372 interconnect error data 



Add AM4372 information to handle L3 error.

AM4372 has two clk domains 100f and 200s. Provide flagmux and data
associated with it.

NOTE: Timeout doesn't have STDERRLOG_MAIN register. And per hardware
team, L3 timeout error cannot be cleared the normal way (by setting
bit 31 in STDERRLOG_MAIN), instead it may be required to do system
reset. L3 error handler can't help in such scenarios.

Hence indicate timeout target offset as L3_TARGET_NOT_SUPPORTED as
done for undocumented bits.

Signed-off-by: default avatarDave Gerlach <d-gerlach@ti.com>
Signed-off-by: default avatarAfzal Mohammed <afzal@ti.com>
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
Signed-off-by: default avatarNishanth Menon <nm@ti.com>
Acked-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: default avatarDarren Etheridge <detheridge@ti.com>
Tested-by: default avatarSekhar Nori <nsekhar@ti.com>
parent 53a848be

Documentation/devicetree/bindings/arm/omap/l3-noc.txt

+1 −0
Original line number Diff line number Diff line
@@ -7,6 +7,7 @@ Required properties: 
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family

               Should be "ti,omap4-l3-noc" for OMAP4 family

	       Should be "ti,dra7-l3-noc" for DRA7 family

               Should be "ti,am4372-l3-noc" for AM43 family

- reg:	Contains L3 register address range for each noc domain.

- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.

drivers/bus/omap_l3_noc.c

+1 −0
Original line number Diff line number Diff line
@@ -231,6 +231,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) 
static const struct of_device_id l3_noc_match[] = {

	{.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},

	{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},

	{.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},

	{},

};

MODULE_DEVICE_TABLE(of, l3_noc_match);

drivers/bus/omap_l3_noc.h

+91 −0
Original line number Diff line number Diff line
@@ -381,4 +381,95 @@ static const struct omap_l3 dra_l3_data = { 
	.mst_addr_mask = 0xFC,

};



/* AM4372 data */

static struct l3_target_data am4372_l3_target_data_200f[] = {

	{0xf00,  "EMIF",},

	{0x1200, "DES",},

	{0x400,  "OCMCRAM",},

	{0x700,  "TPTC0",},

	{0x800,  "TPTC1",},

	{0x900,  "TPTC2"},

	{0xb00,  "TPCC",},

	{0xd00,  "DEBUGSS",},

	{0xdead, L3_TARGET_NOT_SUPPORTED,},

	{0x200,  "SHA",},

	{0xc00,  "SGX530",},

	{0x500,  "AES0",},

	{0xa00,  "L4_FAST",},

	{0x300,  "MPUSS_L2_RAM",},

	{0x100,  "ICSS",},

};



static struct l3_flagmux_data am4372_l3_flagmux_200f = {

	.offset = 0x1000,

	.l3_targ = am4372_l3_target_data_200f,

	.num_targ_data = ARRAY_SIZE(am4372_l3_target_data_200f),

};



static struct l3_target_data am4372_l3_target_data_100s[] = {

	{0x100, "L4_PER_0",},

	{0x200, "L4_PER_1",},

	{0x300, "L4_PER_2",},

	{0x400, "L4_PER_3",},

	{0x800, "McASP0",},

	{0x900, "McASP1",},

	{0xC00, "MMCHS2",},

	{0x700, "GPMC",},

	{0xD00, "L4_FW",},

	{0xdead, L3_TARGET_NOT_SUPPORTED,},

	{0x500, "ADCTSC",},

	{0xE00, "L4_WKUP",},

	{0xA00, "MAG_CARD",},

};



static struct l3_flagmux_data am4372_l3_flagmux_100s = {

	.offset = 0x600,

	.l3_targ = am4372_l3_target_data_100s,

	.num_targ_data = ARRAY_SIZE(am4372_l3_target_data_100s),

};



static struct l3_masters_data am4372_l3_masters[] = {

	{ 0x0, "M1 (128-bit)"},

	{ 0x1, "M2 (64-bit)"},

	{ 0x4, "DAP"},

	{ 0x5, "P1500"},

	{ 0xC, "ICSS0"},

	{ 0xD, "ICSS1"},

	{ 0x14, "Wakeup Processor"},

	{ 0x18, "TPTC0 Read"},

	{ 0x19, "TPTC0 Write"},

	{ 0x1A, "TPTC1 Read"},

	{ 0x1B, "TPTC1 Write"},

	{ 0x1C, "TPTC2 Read"},

	{ 0x1D, "TPTC2 Write"},

	{ 0x20, "SGX530"},

	{ 0x21, "OCP WP Traffic Probe"},

	{ 0x22, "OCP WP DMA Profiling"},

	{ 0x23, "OCP WP Event Trace"},

	{ 0x25, "DSS"},

	{ 0x28, "Crypto DMA RD"},

	{ 0x29, "Crypto DMA WR"},

	{ 0x2C, "VPFE0"},

	{ 0x2D, "VPFE1"},

	{ 0x30, "GEMAC"},

	{ 0x34, "USB0 RD"},

	{ 0x35, "USB0 WR"},

	{ 0x36, "USB1 RD"},

	{ 0x37, "USB1 WR"},

};



static struct l3_flagmux_data *am4372_l3_flagmux[] = {

	&am4372_l3_flagmux_200f,

	&am4372_l3_flagmux_100s,

};



static const struct omap_l3 am4372_l3_data = {

	.l3_flagmux = am4372_l3_flagmux,

	.num_modules = ARRAY_SIZE(am4372_l3_flagmux),

	.l3_masters = am4372_l3_masters,

	.num_masters = ARRAY_SIZE(am4372_l3_masters),

	/* All 6 bits of register field used to distinguish initiator */

	.mst_addr_mask = 0x3F,

};



#endif	/* __OMAP_L3_NOC_H */

CRA Git | Maintained and supported by SUSTech CRA and CCSE